Really la    How do you differentiate your car from others then? 
This place looks familiar. Near Toyota there? 

too bad my car usage is point A to B daily with heavy duty..
I don't wanna use whole heart to jaga the paint.. also 24 hrs my car don't have overhead shades / rooftop except when I park inside shopping malls..

Wow ... Steering lighter ... ... 

I will wait for tomorrow ... See if I have chance to replace stock rim with lenso 7.7kg 17", I will let you know how the feel...

don't la splash cold water.. 
"new toilet bowl" only ma.. happy abit also cannot meh.. 

dem.. canot join u guys poison2.. sad ... arghhh!!

I think this is not replica rim. Lenso is the Thailand brand. Same as Advanti Racing from Taiwan. Those rims exported to everywhere including USA, Europe ...

You sure spare tire 12kg? I would say it is 20kg.... I will throw out the 20kg spare tyre to improve FC 

Setapak SC.. the place do look like they've very complete facilities and ample space for overcrowded cars and customers.. but their skills are nearly "kosong" honestly..
try Puchong 1st.. if its very good then stick to that place..

haha, ya, i also lazy go too far


2nd choice is segambut SC, less than 10 km from setapak

any 1 service at segambut SC before?

wondering how their service as not much people comment on it 

Is this something confirmed by Naza KIA service center?

I didnt realize that when the time install it .. The accessories shop was keep asked me to installed bodykit instead. ... cannot do anything now...
I installed rear rubber spring too just now .. a bit regret My car more bumpy now when run over the potholes or bump...

I choose lighter rim. i guess this rim around 7-8kg.

And test drive just now with my friend. We agreed on few things

1. Car more lighter, like driving my old proton. Can feel like not so stable. I believe because of not get used to it.
2. Tyre Atlantis V7 noise become worse. I believe the tyre not press hard grip the ground now and noisy now ...
3. Pickup improve.. especially from traffic light. Can accelerate more faster, not like big pig last time
4. Lost momentum - You need to press the accel pedal consistently on the highway to keep tyre rolling...

I dont think FC will improve for mixed city and highway drive. If always drive in city, definately will improve.

Overall, it is very good experience...

Would like to know is paddle lock suitable for forte ?will it void warranty .? As I know that they will plug into some plug near the bottom of steering ?

Anyone used it before ?

Is there any other security lock if paddle lock is not suitable ?

I think the brand is lock tech

Makin ramai fortezen.. I guess it is time to call all for a mega TT rite? Maybe boleh buat baju and car sticker sekali kan??

locktech , should cost 3xx

there is local lock too

Hello,
Can you all confirm if we change rims+tyres and balancing+alignment will void 5 yrs warranty?

hi all sifu...newbie here....

I didnt realize that when the time install it .. The accessories shop was keep asked me to installed bodykit instead. ... cannot do anything now...
I installed rear rubber spring too just now .. a bit regret My car more bumpy now when run over the potholes or bump...

I choose lighter rim. i guess this rim around 7-8kg.

And test drive just now with my friend. We agreed on few things

1. Car more lighter, like driving my old proton. Can feel like not so stable. I believe because of not get used to it.
2. Tyre Atlantis V7 noise become worse. I believe the tyre not press hard grip the ground now and noisy now ...
3. Pickup improve.. especially from traffic light. Can accelerate more faster, not like big pig last time
4. Lost momentum - You need to press the accel pedal consistently on the highway to keep tyre rolling...

I dont think FC will improve for mixed city and highway drive. If always drive in city, definately will improve.

Overall, it is very good experience...

bolt nuts buy special one mar.. more "solid" appearance to the rims..
as for the center cone.. please find attached pic for its self explanatory..

rims lighter.. driving it will feel lighter at the below chassis because Atlantis V7 tyre rubber is not sticky to the ground..
I didn't feel any loss of solidity and grip on my PS3.. 

I find that momentum speed is still the same though.. just that drop down gear pick-up can feel its build up speed more quickly than last time if not noticable..

as g88 mentioned, anyone staying nearby Setapak who applied 1 day leave to bring their wifey to Setapak SC and willing to kill long time waiting there for at least 2-3 hours by all means can give it a try..
after all the ample seating space of customers lounge upstairs can keep customers comfy while waiting for 2-3 hours just for very basic minor service (changing engine oil) 

for those who wanna send there to fix any electronics / mechanically / QC defects.. don't put on very high hope to Chan Sow Lin and Setapak branch personnels..

Hi guys.. im back! haha...any new poison yet? my forte got repaired already.. 

Thanks to SC Sri Kembangan..

It takes about 2 hours to settle it. They check whats the problem is and they found my forte ECU got damaged already after 1 week+.. they said this is the 1st time they saw like this. The ECU sudah shock already la i think.. cannot send signal to another part.. they said this ECU cost almost RM4k..wow.. they take a new ECU from another new car to replaced mine as they said I need to wait another day because need to wait for the stock ECU to come. So they will replaced back the ECU to the new car when the stock arrived.

Now my FC better.. last time 22L/100km when my car rosak.. dem!! haha..

Special thanks to Edwin Aka motorman for helping me to get SC Sri Kembangan Manager, Simon to help me.. Boss turun padang check my car   

Will go this SC till i change new car 

Good SA! thanks again Edwin and Simon!   

Hey I found a tyre shop at bandar puteri puchong

The Michelin PS3 (215 45 17) is rm450 per piece From Thailand
And continental MC5 is rm380 but don't know manufacture from where ..
Is that consider good price ?

And what are the driving experience that fortezen here have ?

Can share little from some Sifus~~

Hello,
Don't be like that. I just ask for confirmation. Nothing about believe or dont believe...

The rules is, listen to more will get more better answer.

If you are not happy, you just can ignore me. thanks.

Ok Great! Since they have can do alignment, I believe they have computer to measure camber. I will ask them to check this Saturday. thanks a lot

Now I have a question about bolt nuts. I saw when they tighten the nuts, they didn't use air gun but only wrench by hand. Why they don't want to use air gun? Could that be the case that the bolt nuts is low quality and they afraid the air gun will break the nuts?

Now this is what I call clever, prompt action, good technical knowledge exp., good customers service and pure customers satisfaction. 2 hours vs. nearly 2 weeks for my car kena tahan in SC Setapak last month to rectify just electronic problems. Guys here you all see the difference.. ? btw Kai, good to have your car fixed so quickly once and for all.. what kinda poison you interested at.. ? we got detailing sifu, rims sifu, mercun sifu, ICE sifu all you can find under one roof from here..

*facepalm* 

nothing nothing.. 

Bila nak buat sticker n baju ?? Task ko kan aritu 
thanks bro!
i would like to get the eagle eye and my spot light to white.. xD any idea? lol
So when is our next TT?

About camber nut, Now the Tyre Shop told me the camber run out. few months back when I sent for left pull problem, not sure if the SC purposely adjust the camber to fix left pull problem.
For wheel nuts, I understand it will complicate when we need to change tyre. I will just hope they don't give me lousy nuts.
Is that mean even good quality wheel nuts only can be tighten with torque wrench but not air gun?
Ah Bear, what brand of wheel nut you using now? Did you notice how they tighten your nut? torque wrench or impact wrench?

How about yours, lil_twist?