Tp LInk TL-MR3420 Owner CLub V2.5, need a pro here
|
|
 May 16 2013, 10:16 PM
Return to original view | Post
#1
|
 
Junior Member
39 posts Joined: Jan 2010  
|
newbie reporting in
 Setup: TL-MR3420 V2 + Huawei E398U1V2 (from blacktubi  )OpenWRT: rfactory.org just setup everything just now  location: Cheras (near Bandar Sri Permaisuri) result:    This post has been edited by z8net: May 16 2013, 10:21 PM |
|
|
|
|
|
May 17 2013, 12:12 AM
Return to original view | Post
#2
|
|
Junior Member
39 posts Joined: Jan 2010
|
QUOTE Signal/Cell Information Current Connection General Information Modem : Huawei Technologies Co., Ltd. E398 Provider : MY MAXIS Network : LTE Communication Port : /dev/ttyUSB0 Signal Information CSQ : 27 Signal Strength : 87% RSSI : -59 dBm ECIO : -4 (RSRQ) dB RSCP : -80 (RSRP) dBm Cell Information MCC MNC : - - RNC : #X# (####) LAC : XXXX (#####) Cell ID : #### (#####) Maximum Qos : -- Cellular Mode Current Cellular Mode : Unknown Change Cellular Mode : Automatic my experience setting up just now seems that blackwidow connection very not stable with my e398u1v2. keep dc'ing. not happening when using huntsman... This post has been edited by z8net: May 17 2013, 12:13 AM |
|
|
May 17 2013, 10:41 AM
Return to original view | Post
#3
|
|
Junior Member
39 posts Joined: Jan 2010
|
QUOTE(maxcheam @ May 17 2013, 10:37 AM) May I know if you use any specific APN? Thanks in advance! me also noob... read around here (at v1 guide in first post) i saw there's Maxisbb so i just put it as Maxisbb lor... so far using huntsman no problem... |
|
|
May 17 2013, 02:12 PM
Return to original view | Post
#4
|
|
Junior Member
39 posts Joined: Jan 2010
|
Just download and read the guideline there bro
 as i remember nothing mention about reset just make sure u r not connected to internet... |
|
|
May 21 2013, 11:07 PM
Return to original view | Post
#5
|
|
Junior Member
39 posts Joined: Jan 2010
|
QUOTE(Klemann C @ May 21 2013, 10:06 PM) Hi, thanks for advise. that's the purpose of having openwrt... stability I'm on stock firmware currently. Noticed there is different custom firmware openWRT, huntsman etc. If I'm looking for stability connection which is the ideal firmware for it? |
|
|
Jun 11 2013, 12:33 AM
Return to original view | Post
#6
|
|
Junior Member
39 posts Joined: Jan 2010
|
also happening to me... dunno izzit rooter defect or e398 defect... plugged in rooter lte detected but not connected... direct plug e398 to lappy open mdma lte detected but no provider (maxis)... the only way i did to make them usable is change channel in e398 via mdma then change back to my preference then only maxis showed... after that plug into rooter connected like normal...
btw, izzit normal when change port (increase decrease button) it took a while for it to detect and connect? mine took about 1-2 minutes to detect and connect after click the button... |
|
Topic ClosedOptions
|
| Change to: |  0.0459sec
 0.96
 7 queries
 GZIP Disabled
Time is now: 12th December 2025 - 12:21 AM |
Quote