Outline ·
[ Standard ] ·
Linear+
Home Networking ASUS Malaysia Networking User & Technical Support, Managed by ASUS Malaysia Representative
|
woond
|
 Jul 15 2013, 02:55 PM
|
Getting Started
|
help needed for cctv domain name.
Currently i am using N16 with Firmware Version:3.0.0.4.354.
Somehow it used to work with old firmware but replace a new unit due to hardware issue.
I am using DYNDYN to registor my CCTV for internet view but seems like don't work now. Wonder need to registor on DDNS confirg on my N16 to make it work ( don't recall needed to do that on the last fireware) ? pls help
|
|
|
|
|
|
woond
|
Jul 16 2013, 12:45 PM
|
Getting Started
|
QUOTE(ASUSmy @ Jul 16 2013, 09:31 AM) Hi woond, May I know is the CCTV decoder who do the DDNS log in process or the router? Because if the CCTV who do the dialing then the router no need to put any DDNS. If not, then the router will need to put in the log in details for the DYNDNS. Remember to do the port forwarding is you want to view it from external networks. Thank you Hi there. I don't recall the CCTV could perform DDNS function as it's set to a internal IP address ( e.g 192.x.x.10) which is the same lan segment on my LAN. I suppose need to learn how to deal with port forwarding then . Please advice how to do it. I had register a dyndns domain for external network viewing and i had set to the same WAN IP address as my N16 WAN ip. From my N16 , how to link it to DYNDNS and how to port forward to my CCTV local LAN IP ? Many Thanks! |
|
|
|
|
|
woond
|
Jul 18 2013, 05:35 PM
|
Getting Started
|
QUOTE(ASUSmy @ Jul 16 2013, 06:02 PM) Hi woond, For the DDNS setting, you can do it at the page as shown below. Enable it and you can select the DYNDNS that suit you. http://event.asus.com/2012/nw/dummy_ui/en/...NS_Content.htmlWWW.DYNDNS.ORG If customer WAN is Dynamic IP then use this option. WWW.DYNDNS.ORG(CUSTOM) If customer using their own Domain name and DNS handled by DynDNS.org then use this option. WWW.DYNDNS.ORG(STATIC) For customer with Static WAN IP. As for the port forwarding, you can refer to the link below on how to set it up. But you need to know which port are suitable for your CCTV. http://www.asus.com/support/Search-Result-...word=forwarding Thank you Somehow can't get it work for DDNS , somehow it come out with error say authentication issue. Still , after set up with port forwarding , It all work again ! Thanks |
|
|
|
|
Quote
0.0494sec
0.51
7 queries
GZIP Disabled