I currently interesting in AC86U router. I know it’s a dumb question. But does this router allow to set bandwidth limiter for guess wifi on 5ghz and 2.4 ghz? And how many guess wifi that I can create with this router? It’s not that I cannot google it it’s just that I need a confirmation for those who own this router. If you can, if this feature on latest firmware of course. This for reason that I still keep Archer C7v2 router which has this feature, unfortunately it cannot withhold the speed turbo which I currently have which is 800Mbps. Other odd this is everytime I do a speed test on this router it’s suddenly have momentarily disconnect internet before resume back, but of course this only happen on speed test though.

This post has been edited by whitex19: Sep 12 2018, 03:23 PM

I'm currently using AX11000 router, so far speed is good but it's seems there is currently stability issues with the connection my PC sometimes disconnect from Internet (using LAN cable connected to the router) and when that happen my Wifi seems become unstable dropped speed and slowly back up but not at full speed. This is my current log when this occured.

Aug 31 11:50:32 kernel: eth3 (Ext switch port: 2) (Logical Port: 10) (phyId: a) Link DOWN.
Aug 31 11:50:35 kernel: eth3 (Ext switch port: 2) (Logical Port: 10) (phyId: a) Link UP at 1000 mbps full duplex
Aug 31 11:50:37 kernel: eth3 (Ext switch port: 2) (Logical Port: 10) (phyId: a) Link DOWN.
Aug 31 11:50:40 kernel: eth3 (Ext switch port: 2) (Logical Port: 10) (phyId: a) Link UP at 1000 mbps full duplex
Aug 31 11:50:53 kernel: eth3 (Ext switch port: 2) (Logical Port: 10) (phyId: a) Link DOWN.
Aug 31 11:50:56 kernel: eth3 (Ext switch port: 2) (Logical Port: 10) (phyId: a) Link UP at 1000 mbps full duplex
Aug 31 11:50:58 kernel: eth3 (Ext switch port: 2) (Logical Port: 10) (phyId: a) Link DOWN.
Aug 31 11:51:00 kernel: eth3 (Ext switch port: 2) (Logical Port: 10) (phyId: a) Link UP at 1000 mbps full duplex
Aug 31 11:51:03 kernel: eth3 (Ext switch port: 2) (Logical Port: 10) (phyId: a) Link DOWN.
Aug 31 11:51:05 kernel: eth3 (Ext switch port: 2) (Logical Port: 10) (phyId: a) Link UP at 1000 mbps full duplex

This post has been edited by whitex19: Aug 31 2020, 12:03 PM

Hey guys, I plan to do triband mesh setup. I know that I can disable dedicated wifi backhaul which I planned to do because I want to have 3 separated ssid. My question is how the default backhaul works? Are these nodes are going use their own respective bands as wifi backhaul like 5ghz-1 is using 5ghz-1 as backhaul so does 5ghz-2 too? Plus can I hide the ssid too especially the the 5ghz-2 which I planned to use for myself?