Hi, is my AX58u running a little hot?
Ambient temperature around 30c

Anyone switched from TP-Link ax20 to Asus rt ax3000? The 5ghz signal is a lot weaker right?

Here you go, you can grab the PPPOE credentials from skyworth and put it into your 3rd party router of choice

VLAN tagging / IPTV Profile / VLAN profile not needed on your router with this configuration
Remember to switch off the WiFi function once that's done.

You'll need to setup your computer's ethernet like this in order to access the settings of the 2 in 1 after putting it into bridge mode


courtesy of @blacktubi in Unifi thread



This post has been edited by QuantumEdge: Nov 6 2024, 10:38 AM

Just checking, anyone here using AX88U with 3.0.0.4.388_24224 or newer firmware?
DDNS seems to stop working (www.asus.com) and cant be registered using this domain. Even when registered through the app it would stopped working after restarting the router

I'm running 3.0.0.4.388_24284 at the moment
Still the same, with no option to use ASUS's DDNS (asuscomm.com)
Need to set it through the app, but once I restarted the router it would be disabled again

Tried, still the same
This happened even on recent Merlin builds somehow

China, but before that particular version it worked perfectly fine

Ah got it, I will stick to the older firmware then

Anyone here running AX88u with XT8 on wired mesh?
Any issues?
Saw some comments online saying mix matching devices isnt the best combo due to stability and connection issues?

Thanks for the feedback
Have you ever tried to mesh BE88u with AX88u before?
In a bit of a dilema, since if I choose BE88u I could prep my house for 2.5G but a used XT8 is way cheaper

Guess I will stick to Wifi 6 then, wait till wifi 7 routers are on discounts
Thanks

Slightly overpriced