then is a

great news

i think mostly huawei lor,

Huawei B593

just though to remind you again,

Remember what u are mentioning,..

this forum -> no pirate, and so on,. T&C of this forum,

before receive my E398 later on

just did some feedback

in case any of you interested : http://forum.lowyat.net/index.php?showtopi...&#entry57075748

thanks to blacktubi

here another one

jumping around 2.45 ~ 2.95MB/s ,

still tweaking,.. hopefully able to make it stable

later will post video screenshot to show u

This post has been edited by chuahcs79: Dec 26 2012, 08:08 PM

Well not every one can get high result in speedtest.net. As of example speedtest is using 1 connection compare to idm 16 connection. If speedtest result is low = doesn't mean real speed is low. Some user also encounter low speedtest.net result but their real download speed is more than that. Even can exceed 20Mbps is speedtest doesn't mean the real download speed is maintain 20Mbps. Speedtest.net only last about 10-15 second. Real download speed is maintain the number after 30second to 1min.

between 4 to 5am even better. See finally you prove the high speed in penang here.

Told u Before Georgetown is golden for Maxis,.

now u see it

there is a few more spot can confirm get minimum 33Mbps, if lucky can get 38~42Mbps even in bluemoon

just imagine if DC modem

---

Added on December 28, 2012, 12:13 amtonight speed not bad,.

---

Added on December 28, 2012, 12:26 ameven though IDM running wild and speedtest is not,






This post has been edited by chuahcs79: Dec 28 2012, 12:26 AM

---

Added on December 28, 2012, 1:02 amwow, my first Grade A result

guess dont need fibre to achieve grade A after all

This post has been edited by chuahcs79: Dec 28 2012, 01:03 AM

guess many user wish they are staying in penang,.. LOL,...

even though saw many Celcom Teritory Signboard along many places, but feel like actually is Maxis teritory,

yeah, upload speed need just a little higher, and lower the ping a bit, u will easily get grade A,..

i use huawei E398 tweak 33tx power, flash newer firmware and use QPST set to lock down UMTS2100 band only,.

then only from there magic happen

if u use router, just set MTU -> 576 ,

if u use direct plug in , just use Dial up / RAS ( dont use Window Mobile Broadband Connection or the Dashboard Connection

as Dial up / RAS original MTU is 576 as well,..


Packet size, often referred to as MTU (Maximum Transmission Unit) is the greatest amount of data that can be transferred in one physical frame on the network. For Ethernet, the MTU is 1500 bytes, for PPPoE 1492, dial-up connections often use 576.

Each transmission unit consists of header and actual data. The actual data is referred to as MSS (Maximum Segment Size), which defines the largest segment of TCP data that can be transmitted. Essentially,
MTU=MSS + TCP & IP headers.


It is obvious then that smaller packets will be transmitted faster, simply because of the throughput limitation of the line. It's however somewhat moot point in large transfers, all that's illustrated above is the fact that transferring more data takes more time

source -> Here

---

Added on December 28, 2012, 4:18 amafter tweak E398 and the MTU to 576

here's the most stable result



This post has been edited by chuahcs79: Dec 28 2012, 04:18 AM

glad it helps,

everyone in malaysia deserve a "fibre like connection " enjoy

and share it with others,. remember MTU 576 in 3G router or dial up only,.

will get back to you guys on this,..