Back to omega bloatware. Kernel is NEAK.

Cook! I really that lo seriously....looks very...yummy

Aroma you can manually choose what you want to install.

Guys, ask you something.
If i want to use LED manager, should i disable my notification light in the settings?

---

Added on November 25, 2012, 3:23 pmSgp spigen. Hands down.

This post has been edited by nicregi: Nov 25 2012, 03:23 PM

Thanks for that. Just want to make sure. I actually off the setting there. Basically if turn on, it will overwrite the existing one right?

NEAK kernel seems funny. My phone seems to be a bit warmer than normal. Pelik...and it doesnt sleep well compared to redpill and note2core.

I got a feeling I hate neak more. Seems good but...see this:

Freq (KHz)|Time (×10=ms)|%
1600000 |93195 |52.78%
1500000 |6041 |3.42%
1400000 |5543 |3.14%
1300000 |2693 |1.53%
1200000 |4779 |2.71%
1100000 |2390 |1.35%
1000000 |8539 |4.84%
900000 |2095 |1.19%
800000 |12359 |7%
700000 |13250 |7.5%
600000 |2105 |1.19%
500000 |1408 |0.8%
400000 |2024 |1.15%
300000 |1644 |0.93%
200000 |18501 |10.48%

The phone doesnt sleep much. Weird!

Setcpu. I have setcpu and voltage control. Thinking of getting rom tool box.

Your issue is the failure to go into deep sleep?

Why not? Just format the sd using pc and done with it...

I noticed that the very moment I installed neak. I spoke to simone and he advised me to try pegasusq instead of lion heart and monitor.

Well if this doesnt work back to note2core or redpill. Sadly simone is a good dev honestly.

Optic or oleo? Thinking of getting oleo...

---

Added on November 26, 2012, 12:02 amThe link is at the top.

---

Added on November 26, 2012, 12:02 amTop of the page I mean

---

Added on November 26, 2012, 12:06 amGuys ask you something. I flashed abyss kernel and now already flashed a new kernel. However I cant remove the old abyss cwm. Can I just flash via odin chenglu cwm without problem?

This post has been edited by nicregi: Nov 26 2012, 12:06 AM

I have it somewhere in my SD I think...I think is the Lionheart setting -.-"

Thanks! Scary thought something might go wrong

Redpill definitely saves more battery than perseus UNLESS you know how to tweak correctly.

I felt that I malas want to change rom. Now, maybe I just change kernel cukup :/

In regards of the NEAK kernel, confirmed Lion Heart is the problem. Changed back to pegasusQ and seems SOD is solved XD

Omega 7.1 bloatware free version.

Trying out different kernels is good enough Too much wiping and restoring is pain in the a$s.

1. Check if chainfire 3d works on GN2
2. If it doesn't work, means goes into bootloot.
3. Boot into CWM and flash back your backup.
4. If no backup, download the right ROM or stock and flash via odin or CWM.

*edit: Chainfire didn't state that it will work in Gn2. Where you get that info? Better read first before flash bro. If not, you might soft brick your phone

This post has been edited by nicregi: Nov 26 2012, 01:10 AM

Noob or newbie also read first adoi~

Do you have CWM? If yes, did you backup first before flashing? If no backup, you have to flash back a rom for that. Choose any custom rom you can find on XDA or stock rom. Stock rom can be found on XDA as well.

Download the rom you want and make sure you choose the one flashable via Odin.

Once downloaded, connect your phone to PC, run Odin and flash the rom.

Basically, you can find the guide on XDA but first, download the rom first. Without unifi, it could take awhile

Custom roms: http://forum.xda-developers.com/forumdisplay.php?f=1794

Stock rom: http://forum.xda-developers.com/showthread.php?t=1896696

No problem. Bootloot very common in Android cos Android is VERY huge (community wise).

So, careful hen flashing

Small matter so...nothing much to worry about it...

Recovery mode.

1. Off phone
2. Power + home button + volume up at the same time until you see the boot up logo then release all three.
3. You will now be in recovery mode (looks like MS-Dos)

Isn't that note 2 exactly the same with s2 and tab?

Got difference meh? All looks same ni

Definitely wrong. Where got button for camera? Unless mod then got la. Actually I have s2, s3, tab and gn2. All same if you are using cwm.

I thought normal setting also blink non stop. Got duration? O.o

What you mean? After take off battery, able to turn on? A few reasons.

Too much under volt
Check your apps. Some time 'special' apps give you such. Also maybe some apps not compatible with gn2.
On custom rom maybe?

Here you go

For those who still thinking of neak kernel, this is what my experience are today.

---

Added on November 26, 2012, 3:48 amDont thank me la...just here to help...and cant sleep lol!

This post has been edited by nicregi: Nov 26 2012, 03:48 AM


Attached thumbnail(s)