QUOTE(nicety @ Dec 25 2013, 03:23 AM)
Technically could not add the HK server into HITV manually. However there is good news for you, firmware 1.1.5 is available now for Q5 1st generation, after upgrade to firmware 1.1.5 you will get the HK Server in HiTV. (P/S : Pls use Google DNS to access HITV because TM DNS will block HITV. However, please take note that HiTV might be laggy sometime)
Good news for Q5 Buyers:
Himedia do not forget you, although the product already end of sale but Himedia still continue release the new firmware version 1.1.5. Please download from my skydrive since Himedia website download speed is too slow. This is the beauty of buying Himedia product where you get continue firmware support as I shared in the selection criteria for Android TV Box. Please use the force upgrade method to upgrade your Q5 to 1.1.5 as per below steps :
1. Download the upgrade file from HIMEDIA website.
2. Copy the file into USB disk , ROOT directly. ( don’t change the filename)
3. Remove all other USB and HDD device from Q device, keep only the USB disk with upgrade file.
4. Press and hold the button in the RESTORE hole, then power on your Q5 ( release the RESTORE button after 5 sec)
5. The box will enter into Recovery mode, then start to upgrade. You should see the greenrobot and the upgrade progress bar.
6. Wait for the upgrade finished and the box will reboot.
My hitv experience also very lag even selected tge hk server. Whats da pointGood news for Q5 Buyers:
Himedia do not forget you, although the product already end of sale but Himedia still continue release the new firmware version 1.1.5. Please download from my skydrive since Himedia website download speed is too slow. This is the beauty of buying Himedia product where you get continue firmware support as I shared in the selection criteria for Android TV Box. Please use the force upgrade method to upgrade your Q5 to 1.1.5 as per below steps :
1. Download the upgrade file from HIMEDIA website.
2. Copy the file into USB disk , ROOT directly. ( don’t change the filename)
3. Remove all other USB and HDD device from Q device, keep only the USB disk with upgrade file.
4. Press and hold the button in the RESTORE hole, then power on your Q5 ( release the RESTORE button after 5 sec)
5. The box will enter into Recovery mode, then start to upgrade. You should see the greenrobot and the upgrade progress bar.
6. Wait for the upgrade finished and the box will reboot.
Dec 25 2013, 04:05 PM

Quote
0.0225sec
0.20
6 queries
GZIP Disabled