so exp... lanchao tyre oso 

Ok! New project begun! RM200 to be invested on altenator positive welding cable, to upgrade 400amp cable for maximum charging quality!!!

I'm driving GaGa to work today. Ayam so poisoned by sg999's BLM. The engine response, acceleration, torque lifting, all gone south with the feeling of my stock BLM. I was down shifting when I hit Jinjang over a traffic light T junction, after heel & toe from 3rd gear to 2nd, as I step on my clutch pedal, RPM roaring up(delay lifting) despite I already released gas pedal. As I downshift to 2nd gear, I hit the gas pedal, RPM was lagged behind(delay acceleration), as & when I release my clutch pedal, suddenly RPM shoot up(delay lifting again) despite I already release gas pedal!!! As a result, the whole vehicle hesitaed in to an embarrassing jerk! I hate the throttle response!!!!! I hate stock setup!!!!!

I was wrong about grounding importance. I was wrong about VS effectiveness. What matter is the quality of these accessories. In near future few weeks, I will be suferring finding a cheap/effective way to improve the conduction/impedance current in my BLM. This will be a 1 time deal. When I decided to do whatever mods, I will be calling for a short term bulk order. If you're ready, standby to bore a small hole in your wallet. My budget to complete this mod within RM300 by stages.

Contnue my journey to Cheras/Kajang/Dengkil/Banting/Jenjarom/Panglima Garang/SiJangKang/Botanic/Shah Alam for the day... continue suffer in stock delayed acceleration/lifting with my poor stock BLM! Argghhhh!!!! I hate sg999!!!! Hate you for introducing how bad my BLM is! Knowing my car has the potential but wasn't able to achieve the same is a real pain in the butt

pages 124 and no one bising2 to choose new TS?

pages 124 and no one bising2 to choose new TS?

u want? give u do la~

u wana do izzit Mr SiuYi~~!!

i WAS the ts for thr early times.

For tidiness of cables in engine bay, you do not need special clip(unless you really plan to invest and going commercial like a show car). I don't have a sample right now, but you may refer C2KBUS2005 unker choy's Iswaga. I think I did a master piece grounding work on that car. Wiring was tied up with cable tie only, but was crossed tightened on each joint to make every cable parrellel with other existing cables. Sorry the car is no longer with me, if unker willing to post a photo of those pretty cables in the engine bay, u'll get to see how I tidy up.

yes daiso... wana go 1U to look for bigger casing... 

u want? give u do la~

Ok! New project begun! RM200 to be invested on altenator positive welding cable, to upgrade 400amp cable for maximum charging quality!!!

I'm driving GaGa to work today. Ayam so poisoned by sg999's BLM. The engine response, acceleration, torque lifting, all gone south with the feeling of my stock BLM. I was down shifting when I hit Jinjang over a traffic light T junction, after heel & toe from 3rd gear to 2nd, as I step on my clutch pedal, RPM roaring up(delay lifting) despite I already released gas pedal. As I downshift to 2nd gear, I hit the gas pedal, RPM was lagged behind(delay acceleration), as & when I release my clutch pedal, suddenly RPM shoot up(delay lifting again) despite I already release gas pedal!!! As a result, the whole vehicle hesitaed in to an embarrassing jerk! I hate the throttle response!!!!! I hate stock setup!!!!!

I was wrong about grounding importance. I was wrong about VS effectiveness. What matter is the quality of these accessories. In near future few weeks, I will be suferring finding a cheap/effective way to improve the conduction/impedance current in my BLM. This will be a 1 time deal. When I decided to do whatever mods, I will be calling for a short term bulk order. If you're ready, standby to bore a small hole in your wallet. My budget to complete this mod within RM300 by stages.

Contnue my journey to Cheras/Kajang/Dengkil/Banting/Jenjarom/Panglima Garang/SiJangKang/Botanic/Shah Alam for the day... continue suffer in stock delayed acceleration/lifting with my poor stock BLM! Argghhhh!!!! I hate sg999!!!! Hate you for introducing how bad my BLM is! Knowing my car has the potential but wasn't able to achieve the same is a real pain in the butt

yes daiso... wana go 1U to look for bigger casing... 
hmm... the subang cornering where there got a signboard CKL.. mostly without car i go ard 90-100... with car also ard 80-90..  btw the auto gb better than mine
waiting for ur project... and thts why i dont wan to sit ppl to test.. later butthurt.... but intend to reroute my chepo GC as seen the Loo and sg999 the GC routing so clean and smart... make mine looks like crap...

and btw where to but the clip to hole the GC inline??

im newbie 

ooo..virgin ya...masih kasih breaking.

how big is the biggest?

he want so big until can masuk one real car..

how big is the biggest?

Sound good, is time for butt hurt. You will never regret about this. hehe
You can try to get 1 set of GC and VE for replaced the existing cheapo GC, you will never regret. And might be helping on sound system too.

nola... at least one that I can fit in my drumstick... hahahah