This will be my first ever build log. Only time i took pictures parts are when i am going to sell them.. Hope all goes well!

This will be a very long term project as there are a lot of things that i have not gotten my hands on yet.. But i will be updating from time to time once i have the parts for this build in. So without any further bla bla, i give you the list of the items:

Hardware:

Mobo: EVGA Classified SR-2

CPU: Intel Xeon X5600 series x2

RAM: 48GB Samsung DDR3 1600mhz

GPU: 4-way SLI EVGA GTX 680 Classified

PSU: EVGA Supernova NEX1500 Classified

Storage: Samsung 830 256GB SSD

Optical drive: still looking for slot load Bluray drive (any idea where to find one?)

Casing: Little Devil LDPC-V8 inverted


Cooling:

- Swiftech Apogee Drive 2 CPU block x2

- EVGA GTX 680 Classified waterblock x4

- 3 x 480 rads

- Swiftech MCP-35X2 pump

- EK MultiOption Res X2 250 Advanced

- Mayhems Pastel Red coolant

- Mixture of Bitspower and Monsoon fittings


As of now, the cooling list is not final. But will definitely be getting the pump and CPU and GPU blocks. Will see which mobo block available as well as RAM blocks.



It will come soon! Soon!!! But it will not be as pro looking, but i will try my best!

Well, thats it for now! til the next update with PHOTOS of HARDWARES!!!

monster build. looking forward to it.

WOW

OMG....EVGA SRX.....THIS IS BUILD IS ALMOST 20K =.=

Oh its not SR-X.. just the previous version, SR-2..

Will try to update later tonite with some pics! Hopefully...

This post has been edited by logic_life: Sep 28 2012, 06:18 PM

Where did you get the mcp35x need to,get more

Well I haven't got it yet. But I think I will most probably be getting from performance pcs.

Can I buy one from you?
Using mcp35x2 already thinking of getting another

Ha? I am getting the MCP 35X2 which is the dual pump model. If I sell one I will have nothing left....

ho crap. crazy build incoming! looking forward to the finished product. subbed!

Not enuf laaa...add another RM10k..

phewwww....
what a...........

Aiiiii....taiko modder pun mengeluh?

i just......
cant say........
errr..........
anything.

Sorry I meant can I tumpang your buy from performance pc?
Also if you are using a sr2 board would be tight to fit push pull for the top rx480 rad and the gc
Would need to buy single slot adapters too for gc

This post has been edited by sam sam: Sep 29 2012, 04:44 AM

Oh u wanna tumpang ka? Shouldn't be a problem. I will let u know when I am going to purchase ya.

---

Added on September 29, 2012, 7:51 amI will definitely not be using push pull up top due to the size of the mobo. But if I want to, I think I will have to go with the slim factor rads like swiftech's or xspc's ex series. But I am looking at the alphacool UT60 rads.

This post has been edited by logic_life: Sep 29 2012, 07:51 AM

If you using ut60 can't fit push pull. Even I am using Atx chassis on my last card gpu it's a tight to clear the fans
Also if you using ex360 you should be able to push pull for the bottom two rad
If it a ut60 or rx480 you can fit one push pull and one push. But it would be tight
I didn't like that so i just did push. I like to keep my chassis low on dust

Pm when you want to buy

can I tumpang along when you purchase from PPC?

Hahaha more n more ppl wanna tumpang. A few more we do group buy!

uh.. i wan join to..