that's the B03 that everyone need now

sharing something i been using in reflecting signala while already ,.. cheap and easy to DIY

3 Soya Box Combination DIY in reflecting signal





the router + modem on top of cooler pad to keep cool
and this way can reflecting signal fully yet can cool down router + modem too

This post has been edited by chuahcs79: Sep 24 2012, 04:41 PM

what do u mean by can't install ? mind to explain more detail ?

cannot install the modem software ? or computer cannot detect the zte mf680 ?

it is p1 lan cable, i like it due to is very thin and very strong RJ45 head,.. and is 2 meter enough for my pc,. i move the router to my computer table and use the 3 soyag BOX diy

this way is the best,
can keep the router + modem cool down with cooler pad
yet can reflecting all 3 direction signal,.
it works like a charm, and yet can recycle help our earth
you should try it

of course i do work,
that's the secret

well everyone have a different path and different point of view

still finger cross to hope get mf680 back to DC signal

you tweak the UMTS2100 band with MDMA band config yet ?

again,

same answer as i given before,

depends on a few factor,

- personal budget
- preferences
- experience with the brand

This post has been edited by chuahcs79: Sep 24 2012, 06:52 PM

the QoS is base on a few factor:

- which area u are in
- what device u are using
- what kind of sim u are using
- what channel of network you are log on to


Maxis wont be able to answer you or assist you due to QoS is different in every area

example:

if u are 42000/8640 QoS but in very congested area, you will having speed 3~5Mbps only

if u are 16000/8640 QoS but in very less crowded area, you might have 13~16Mbps and max out the 16000 in midnight even,.

hope those info help

so u mean after u set to UMTS2100 only in MDMA band config,

no more data traffic flow ? then u can see the CELL ID or not ?

if can see CELL ID, then should have data flow

either 8640/8640 or 16000/8640 is still better than 2048/2048,..

so watch out of what u wish for

because u are using a HSPA modem,

wit h E1762 best u can get 6~7Mbps ( i mean if u are very lucky like fruitie able to get that whole time ),.

otherwise , try a DC modem, dual channel transmit data is always better than single channel transmit data

---

Added on September 24, 2012, 7:17 pmthat is only a standard rough number,...

if u are in less congested area or using better modem, u might be able to surpass the dl QoS,.

This post has been edited by chuahcs79: Sep 24 2012, 07:17 PM

then i guess ur area not suitable for UMTS2100,..

guess u need to switch it back to automatic

those band config is easy for ZTE,.. not like huawei

for data flow in MDMA only support huawei modem and a few others,

ZTE is not fully support ,..

i did, mine use to be 2048/2048 for nearly months,.. until one day it auto change QoS,..

Torrent time kaw kaw,

[attachmentid=3067093]

ha ha

HSPA+ = 4G ? guess many developer out there stilll really dont know what is 4G

wow since whjen u are also into cooling system

signal always running around, there is no certain spot can be permanent other than installing a directional antenna outdoor, LOL,.

yea i also keep modifying my DIY Soya box,.. since i have tons of those box,.. can recycle for our signal usage or also help the earth

---

Added on September 25, 2012, 12:52 ambut honestly Huawei E372 also quite warm too, of course is not as hot as ZTE MF680, but still quite warm

This post has been edited by chuahcs79: Sep 25 2012, 12:52 AM