Superb..compare with my exora which can't even come close to it when pick up at the traffic light. Extremely quiet, heard tire sound a bit (currently both pressure at 230 lbs), will put it high tomorrow morning and see the tire sound will be louder or not. Over bump are extremely smooth comparing with exora. Never hear any other than the tire sound after taking a spin around for an hour. Maybe the sound come when I start moving my stuffs into it. Smell of plastic, I think this will last for some time. Move spinning around tomorrow to KL town for breakfast, Puchong for door visor and start my wish list hunting....(Dec another 600 fuel to spend from company acc )

Any nice car accessories shop recommend around Klang Valley?? around Serdang, Old Klang Rd or Puchong??

This post has been edited by wankf: Dec 1 2012, 12:25 AM

So what is the best recommendation for the tire pressure based on your comfort and FC experience so far??

you try 40 is noisy but good FC?? 32 comfort and less noisy but lousy FC or so so?? Right??

This post has been edited by wankf: Dec 1 2012, 12:36 AM

Dun see any red PC around so far but I think it should be nice and it would be great to have them around. Need to have more PC around Klang Valley.

TRD set only cost RM1300 at Puchong and its ABS. Warranty void.....very subjective, even I ask SA just now when I took the car. He can't give me a definite answer.

Price: RM 1300

-Original ABS Material.
-Original Fitting and Mounting.
-No Riveting or Drilling on Body
-Durable, Lightweight,
-High Heat Resistance.
-Quality Assured.
-One Year Warranty on Paint.
-Direct Factory Price.
-Include front skirt, side skirt & rear
skirt,
-Include painting and rubber lining
-include installation.


Does not include the big spoiler which I saw one from Kajang the whole set for RM1600 (which mean the spoiler cost RM300) Anyway I dun like the look of the spoiler...

This post has been edited by wankf: Dec 1 2012, 01:17 AM

Sorry khenglc, here is the info you wanted:-

Price: RM 1 300

-Original ABS Material.
-Original Fitting and Mounting.
-No Riveting or Drilling on Body
-Durable, Lightweight,
-High Heat Resistance.
-Quality Assured.
-One Year Warranty on Paint.
-Direct Factory Price.
-Include front skirt, side skirt & rear
skirt,
-Include painting and rubber lining
-include installation.
-Booking takes 4 days.
-Booking fees RM100, Balance on
installation.

Interested please call or sms to 014-2354667 (AeRon Tee) for appointment.

Location : No. 5 & 7, Jalan TPK 1/9, Taman Perindustrian Kinrara, 47100 Puchong, SEL.

WORKING HOUR : 9.00a.m - 6.00p.m (MON - SAT)

I want to look for others, just want the side & rear skits. The above is selling whole set and he is not my friend. Found his adds at mudah page.

---

Added on December 1, 2012, 2:24 pm
Hi bro, just came back from my KL rounding and go Puchong for my door visor.

Testing my ScanGauge ii which I installed this morning. Currently monitoring engine RPM, MG1 RPM, MG2 RPM & water coolant temperature(later want to program in the SOC % as well). Thought want to go Serdang hunting but the jam make me change my mind. Go later or tomorrow..

Today FC so far.....travel 86km at 24.5km/l .....tested tire pressure at 40/38 measure wind & tire sound 88 dB at 80~90 kmh speed. After install visor same road & speed sound drop to 86 dB(maybe nid more test). Tomorrow might try low tire pressure recommended by Toyota....errh...I think is 33/32 and check sound level again. I dun like current tire pressure, too hard...go over a stone also can feel it. Last night was good at 32/32 (more enjoy or too happy after received car).

Notice there are clicking sound(once in awhile) from the rear floor right hand side while driving, is that normal guys??

This post has been edited by wankf: Dec 1 2012, 05:12 PM

Damn should had found this sooner. An OEM Toyota Android DVD player(PIXEN) which can link to OBD ii post.

Now I had bought the ScanGauge ii, if not should go for this. I had send in my enquiry and waiting for their reply. Their office located at Setapak only.

The player specifications as follow:-

1) FreeScale Chipset( iMx5)/ARM CORTEX A8 CPU with Frequency Speed of up to 1.2GHz
2) Advanced DSP Built-in(NXP7741), Digital X-Over, Multi Band Digital EQ and Digital Time Delay
3) Advance 3D Hardware Acceleration/ 512MB DDR RAM
4) Advance Android 2.3OS/ Allows Upgrade Up to Version 4OS
5) GPU output True 720HD Resolution(800*480)
6) Allows Software Upgrades of Through SD Card
7) Supports CAN BUS, Displaying CAN BUS Information on TFT Screen (support OBD ii)
8) Material and Workmanship Are Of Car Grade Standard, Passing -30 to +80 degrees working temperature
9) Programmable Steering Control's Functions For Most Cars
10) iPhone Connectivity Through External Junction Box For Audio and Video Playback and On Screen Controls
11) 3G and WiFi Connectivity Enable
12) GPS maps provider like CARELAND and PAPAGO.




This post has been edited by wankf: Dec 1 2012, 04:01 PM

Aaaaaaarh......why so hard to find cansf coding for door lock...after two week of search came out with nothing. ....like this I think Monday must go and look for my CAN protocol sifu.

Well got it running. Cool gadget...I punch in a few more stuff like Fuel level in %, cabin temperature and other code I haven't try yet. There are command to turn off like seat belt beep 1 or 2 and so on. But I am try to find the auto door lock coding. Coz I contact the guy who sell the auto lock module is connected to the OBD ii port, so it is sending a code to ECU to switch on the auto lock from the module. I need those codes.

---

Added on December 1, 2012, 11:15 pmYes it does until you get out and lock the door. But once the door is lock, it turn off......why your still flashing??

This post has been edited by wankf: Dec 1 2012, 11:15 PM

Myvi is nothing close to PC, dude...PC is much cooler!!!! But I notice since yesterday, when people driving Myvi coming from behind of me. They will try very hard to over take me. I can hear their engine sound pushing real loud and hard. It is only me or it happen to you guys too.

This what I wanted....cool man!!! ! Anyone know where I can get this Modellista bodykit?? The only one I know had this kind is from Kepong...RM5500 not include paint yet. I love it but not crazy enough to take from this guy.

But this one have a different headlight, tail-light...looks cool too. I am still wondering why people kept talking about PC look like Myvi. If you park side by side (that's I did today) and straight away you can spot the PC cool look. It is lower then Myvi and front , side and back are totally different.

To me the front look like the pokemon monster tortoise head....hahaha..

This post has been edited by wankf: Dec 1 2012, 11:47 PM

Which one?? the RM1300(price include paint as mention) from Puchong?? You have to check it out. Before they install you can check it first. If paint colour does not match, you got the right to refuse it, right??

This post has been edited by wankf: Dec 2 2012, 12:17 AM

As for now..mine is not flashing after lock. I will monitored the next couple of days. How about others guys here, does your flash after lock??

You guys might want to know that the indication show on the battery got 8 bars. I found some info on those 8 bard percent's stand for...from priuschat....

1 bar is 40~44%
2 bar is 44~47.5%
3 bar is 47.5~51.5%
4 bar is 51.5~54.5%
5 bar is 54.5~57.5%
6 bar is 57.5~66.5%
7 bar is 66.5~77.5%
8 bar is 77.5~81%


This what they measure or get from the SOC reading. So I too will monitor my SOC from my ScanGauge ii and see what they mention is correct or not.

So the battery is not 100% fully charge all the time..... does this way make the battery last longer??

This post has been edited by wankf: Dec 2 2012, 12:27 AM

Well as long as you use back their origin cable for the headlight should be ok I think....

I think they got excited when saw us (PC) on the road and want to catch up to have a good look at it. Same time want to compare their car with our PC power. Those who can't over take me must be really piss off. By using the ScanGauge ii display to assist and understanding the way I driving is real fun. As long as I dun hit over 3000 RPM should be good on my FC(I think it should be same like other cars and same time comparing with our ECO Display)...anyway I am still testing it. If I found anything to improve the FC, I'll share it here with you.

Watching the three RPM changing is fun (engine, MG1 & MG2). Actually I got another gadget...the OBD ii bluetooth & USB. Haven't try those yet. The Android apps gauge look pretty cool too. But I really dun wan to use my SGS2 while driving. Maybe get a cheap china made tab...hahaha....they show nice gauges on screen.....for now ScanGauge ii is good to go.

More driving today...will continue my hunting(wishing list) today at Pasar RD, Puchong & Serdang. I saw the Big Brother shop at opposite IOI mall. Anyone try this shop for our PC accessories there?? It look huge comparing to other accessories shops. But who know, they might have nothing for our PC....

OK taking off now....Breakfast first most important meal of the day!!!!

This post has been edited by wankf: Dec 2 2012, 08:20 AM

Yes, the pressure is super crazy but my SA did mention it and ask me to go reduce it. Enjoy ur ride

Really sorry I do not know how to attach picture here but it look the same as this link :-

http://priuschat.com/threads/scanguage-ii-...prius-c.106524/

I install at the same spot as the link picture shown but a bit higher....I set the color to light blue(lazy to try other color).

FLV not showing any reading...went back to their website and look for a correct code. Will try again later...

Might change the spot after I get the top user box(with solar panel) from HK which I can't find it selling here.

This post has been edited by wankf: Dec 2 2012, 05:24 PM

So far I try a few configuration.....first try 33/33 (enjoy/comfort). 40/38 38/36 (light/hard & bumpy), 34/33 (enjoy/comfort)....that my last two days testing result conclusion...

Tomorrow will try 32/32 which is recommended by Toyota.

This post has been edited by wankf: Dec 2 2012, 04:30 PM

ZaRR, See how first....but its very cheap only(RM140) compare with ScanGauge ii (RM550).......