Outline ·
[ Standard ] ·
Linear+
Samsung Galaxy S II Official Thread V36, I'm back guys, sorry!
|
droidtrix
|
Sep 11 2012, 02:10 PM
|
|
Guys, yesterday I brought this Galaxy S2 Non G Ap Set, 2 months old from mudah.my... Still new, no dent, no dead pixela and it already updated to ICS 4.0.3, non rooted..
Now I am trying to figuring out how to root and flash Custom Rom that is available in XDA forum.. Any help from you guys are appreciated if you guys can guide me.. I did read the 1st to 4th Post of this thread but I am bit worry ...
|
|
|
|
|
|
droidtrix
|
Sep 12 2012, 09:23 AM
|
|
Good Morning to all
Finally, I have rooted my set and running Jelly King CM10 Rom..
So far ok for me..
(TS - Kindly add me in the user list - SGS S2 white)
This post has been edited by droidtrix: Sep 12 2012, 09:55 AM
|
|
|
|
|
|
droidtrix
|
Sep 14 2012, 01:14 PM
|
|
I am using the Jelly King v1.5 with Siyah Kernel v4.1.5.. When I run the Antutu Bench Mark, it show that my max CPU is 1.2 ghz.. Can I overclock this ? Just for my knowledge only..
|
|
|
|
|
|
droidtrix
|
Sep 25 2012, 06:37 PM
|
|
Well, I look at the XDA forum, there is so much of Custom Rom available for Non G version, dont know which one to choose.. Guys , can recommend one that has better battery stability and reliablility..
|
|
|
|
|
|
droidtrix
|
Sep 26 2012, 03:02 PM
|
|
QUOTE(azamen87 @ Sep 26 2012, 02:08 PM) hello guys, recently my friend purchased a white galaxy s2 (claimed non-G) version which cost about. 1.2k from his fren at kl. wanna ask those sifu here: 1. non-G got white? i myself owner S2, but so far only G version i see white. 2. the battery slot. while my S2 the pin is on right hand side, his is on the left, where the sd card slot should be, meaning his battery letak terbalik. 3. i cant see any slot for sd card slot. the phone rosak, and was sent for warranty, and he told me that his fren cakap, "samsung" guys said it is ori. can sum1 confirm this? i'll post a pic after my fren come back from site inspection. thanx. There is no White Non G model for Malaysia market. According to my fren who is Samsung Mobile Dealer told me few months back that SME stop selling Black Non G model and start selling G model only.. Even now I asked him, can we get Non G model, he said only AP set can but that depends which AP company selling.. Also he did mentioned also that currently in the market there fake/imitation SGS S2..
|
|
|
|
|
|
droidtrix
|
Sep 26 2012, 03:24 PM
|
|
QUOTE(azamen87 @ Sep 26 2012, 03:07 PM) dats what i tot. usually i see fake, the samsung writing sure got problem 1, either its bigger or using other font. but my fren one memang 100% same, both the front and back. the difference is the home button sux like no spring; no sd card slot and battery placement is right to left  Hmmmm, couple days back, one of my office staff brought from someone claiming that the set is SME Ori with warranty left abt 8 months from SME.. But turn to be FAKE as he went to Samsung Service Centre in KL. After various test done by Service Centre Staff, they confirmed that the set is fake. He was like really pissed off but what to do, he cant able to contact the seller what so ever.. Now days, to buy Smartphone or any other phones, must be really careful, we as Consumer don't know whether the product that we are buying are really genuine or not as there a lot of Fake/Imitation model are available.. This post has been edited by droidtrix: Sep 26 2012, 03:29 PM
|
|
|
|
|
|
droidtrix
|
Oct 3 2012, 01:27 PM
|
|
I am using DiliDroid ICS R1.4 since three weeks, I have not issue in 3G Internet surfing or sending/receiving MMS in Maxis Network.. I just deleted std APN and created New APN.. It been working perfecly ever since
|
|
|
|
|
|
droidtrix
|
Oct 3 2012, 03:15 PM
|
|
This what the settings for APN Maxis MAXIS Home -> Menu -> Settings -> Wireless & networks -> Mobile networks -> Access Points Name Menu -> New APN Name = Maxis(3G) APN = unet Username = maxis Password = wap MMSC = http://172.16.74.100:10021/mmscMMS proxy = 202.75.133.49 MMS port = 80 Authentication type = PAP APN type = default,supl,mms (Others, leave blank) Try this settings, Bro
|
|
|
|
|
|
droidtrix
|
Oct 5 2012, 12:03 PM
|
|
QUOTE(mtxx @ Oct 5 2012, 12:00 PM) official cm10? the one from get.cm? or you mean the vsync version with many complicated kernel version combination one? if no memleak, lets all migrate to JB already Well, I am still using ICS 4.0.4 DiliDroid V4.1 with latest Dream Kernel.. I don't have any memleak.. I better stick with ROM as this Rom serves me well as daily usage...
|
|
|
|
|
|
droidtrix
|
Oct 15 2012, 04:11 PM
|
|
Did any1 send their SGS S2 to service centre due this issue as my fren faced that is when ever take out battery from the set and re insert back, it boot automatically.. If yes, what was the main cause of the problem and what was rectification made ?
|
|
|
|
|
|
droidtrix
|
Oct 15 2012, 08:19 PM
|
|
QUOTE(gin&tonic @ Oct 15 2012, 08:13 PM) Give more details so sifus here can help u.. I was doing Nandroid Restore via CWM.. while restoring system its, suddenly it gone ... all black out.. Tried this : - On the set - nothing happen Download Mode - Nothing happen Recovery - Nothing happen... Any help? Added on October 15, 2012, 8:20 pmQUOTE(nehalem176 @ Oct 15 2012, 08:12 PM) you're very sure the combination key is correct right? cant even enter download mode and recovery, yup, it's hardbrick. last resort JTAG Last Resort JTAG, where can I go to JTAG!!!! This post has been edited by droidtrix: Oct 15 2012, 08:20 PM
|
|
|
|
|
|
droidtrix
|
Oct 15 2012, 08:27 PM
|
|
QUOTE(antt00 @ Oct 15 2012, 08:21 PM) What rom were u using? Bet its one of those with brick bug. No other way but to go samsung service center and get a replacement mainboard. If I send to Samsung Service Centre, will they know that I rooted and flashed Custom Rom.. how ?
|
|
|
|
|
|
droidtrix
|
Oct 15 2012, 08:32 PM
|
|
QUOTE(antt00 @ Oct 15 2012, 08:29 PM) They wont know cos they wont be able to boot the phone as well. But just to confirm what rom were u using. DiLiDroiD ICS UHLPS 4.0.3 R4.1 - THE MONSTER
|
|
|
|
|
|
droidtrix
|
Oct 15 2012, 09:10 PM
|
|
QUOTE(antt00 @ Oct 15 2012, 08:52 PM) AFAIK that is not a brick prone rom. Are you sure your batt is not flat? What rom were you restoring? I was trying using this ROM - Resurrection Remix JB v3.0.9 past two days b4 that i was using this DiLiDroiD ICS UHLPS 4.0.3 R4.1 - THE MONSTER for past one month.. So yesterday I did restore via CWM !!!!!It gone...
|
|
|
|
|
|
droidtrix
|
Oct 15 2012, 09:42 PM
|
|
QUOTE(antt00 @ Oct 15 2012, 09:25 PM) Neither of those roms are known to brick phones. Does your batt still got charge? Yes, it has about 85% ... What I should tell to the Service Centre ppl, I planning to go to PJ Service Centre.. How long does it take for them to repair or replace the Main board? This post has been edited by droidtrix: Oct 15 2012, 09:44 PM
|
|
|
|
|
|
droidtrix
|
Oct 16 2012, 08:43 AM
|
|
QUOTE(ZRong223 @ Oct 16 2012, 06:59 AM) This one, in G version has the same problem, normally after exiting an app. I am sure this is due to Samsung's faulty firmware. Not sure non g version though. Added on October 16, 2012, 7:04 amQuite same as my issue. The phone cannot be opened at all. You can tell the guy there for whatever reason buy tell him YOUR PHONE IS NOT ROOTED! Thanks to antt00 my phone is back now. Currently on CM 10  How long does it take for Samsung Service Centre to repair/rectify the problem..?
|
|
|
|
|
|
droidtrix
|
Oct 16 2012, 10:46 AM
|
|
Good Morning Guys/Gals...
I just came back from Samsung Service Centre PJ, sent my SGS S2 which I cant on or charge at all.. At first they decline they decline to take as they claim the warranty already over for this set (Non G) by look at the Serial / Imei No, but i did mentioned that i have warranty until 1st Jun 2013, they said can't be.
Then I show them the SMS that stated warranty from Jun 2012 to Jun 2013, then only they take the set.. According to them, they have to check first what wrong with the set, i told them that while charging the phone, it goes blank and cannot on or charge at all.. Even after take the battery , reinsert back still the same.. They also did the same thing but they noticed the set get warmed at the back of the set near camera area.. So they said the mainboard got problem, it will take them to repair or repair 3-7 working days.. I told them I dont take phone so ask them for favour to speed it up , they seaid they will try their best...
HMMMMMMMMMMMMMM
This post has been edited by droidtrix: Oct 16 2012, 10:48 AM
|
|
|
|
|
|
droidtrix
|
Oct 16 2012, 04:49 PM
|
|
QUOTE(droidtrix @ Oct 16 2012, 10:46 AM) Good Morning Guys/Gals... I just came back from Samsung Service Centre PJ, sent my SGS S2 which I cant on or charge at all.. At first they decline they decline to take as they claim the warranty already over for this set (Non G) by look at the Serial / Imei No, but i did mentioned that i have warranty until 1st Jun 2013, they said can't be. Then I show them the SMS that stated warranty from Jun 2012 to Jun 2013, then only they take the set.. According to them, they have to check first what wrong with the set, i told them that while charging the phone, it goes blank and cannot on or charge at all.. Even after take the battery , reinsert back still the same.. They also did the same thing but they noticed the set get warmed at the back of the set near camera area.. So they said the mainboard got problem, it will take them to repair or repair 3-7 working days.. I told them I dont take phone so ask them for favour to speed it up , they seaid they will try their best... HMMMMMMMMMMMMMM Question: Will they change the same main board (Non G to Non G)?
|
|
|
|
|
|
droidtrix
|
Oct 16 2012, 05:04 PM
|
|
QUOTE(antt00 @ Oct 16 2012, 04:57 PM) So far this seem to be the case. G with G and non-G with non-G. Ok Thanks for the info, because I just called them asking aboutt status, they mentioned that they changed PCB board and still testing... hmmmmm
|
|
|
|
|