so now which molex is connected wrongly? The small molex for floppy or the normal molex for dvd/hdd.

You have to find the exact model of hard disk (prefer same size) and replace the circuit board. So try to find a bad sector hard disk with good working circuit board. Just need some special screwdriver. (Some screw on hdd are philips head). Depends

sure molex 4 dvd/hdd
but now it working afters ending to repair..

How connect wrongly? 'Terbalik'?

molex cant connect wrongly..coz its got shape

wat burn seller dvd-rom n hdd is the wires are place wrongly..there r 4 wires mah for molex(12V, ground n 2 other)..places r switch for the wires mah burn lor dvd rom n hdd

he done sleeving wif molex connected back wrong..
tengok susunan warna wayar x sama dengan standard

hey, man..bout month ago i bought a CM 450W psu..it was working fine for the first half of the month, but one night, the psu blow up right in front of my face..fortunately, i still got the manufacture warranty, and everything turns out to be ok..

my point is, ACCIDENTS DO HAPPENS, bro..and that's the fact of life..just face up the facts and continue on living with ur life..

If it's really an accident then it's an unfortunate event, but if it's human (read: other) error how can continue living, calmly at least. Maybe you don't live your life long enough.

That is not the small molex you use for display cards but it will be affected because if I am not wrong, the molex will loop from first to last with big molex, big molex then small molex. Therefore if first molex wire is connected wrongly, the second and third also wrong. That's why his dvd and hdd got burnt.

For the seller, I think he was lucky that when he tested, he was probably using the other small molex that he connected back correctly on the display card. Most branded PSU have at least 2 small molex.

But then this is based on the information I gather from what the seller and buyer gave. Not standing in either person's side but in this case, seller seems to be more at fault.

human error is one type of accidents, bro..after all, we all just humans, right?

"TO MAKE MISTAKES IS HUMAN, BUT TO FORGIVE IS DEVINE"
-Shakespear

i can accept this human error..
but responsibality is needed..

Making mistakes is one thing and taking responsible for mistakes is another.

If I am driving and made a mistake and knock someone dead. So, I say sorry and no need to pay for my mistakes?

haiya, bro..knocking somebody off dead is another scenario laa, coz i think the best way to pay that mistake is for u to be knocked off dead by the victim's family..

but we're civilized human beings, right? so we have to listened to BOTH parties statement before making any assumptions..sure the customers are always right, but even if u if u ask the manufacture to take responsibility for damage that have been caused by the product malfuction to ur pc, they will refuse..coz they can and will only refund their own defective product, not others..

and to the seller, u sure have to take responsibility for ur action..u have to refund the defective psu, or if the psu has been repaired by the buyer, u must pay for the repairing costs, but no more than that..

but if the buyer considered it not enough, u can take this case to the Consumer Tribunal..and i bet they will tell u the same..

i`m not asking more...
1.juz give me 40g hdd(used also can but must work)
i`m working now wif 7g hdd only..
if cant...pay me RM50 that cost me repair the psu coz the psu also burn up the shopkeeper cd-rom..

OK i will pay for your repair on the PSU. Give me your A/C no. and i will bank in.

if u do ta...i wil u...

but...next time sell anything...pls check everything... i means buyer n seller

will be nice for me if u pay the money..
gonna buy new hdd bro..

thanx thanx thanx thanx thanx thanx thanx thanx
will ugpm my acc number..

very nice, guys..u all proved that diplomacy is the BEST way to settle any dispute..

Yes, it's great seeing everything being able to be resolved

Please inform us or close down the topic once this issue has been resolved ...

Thank you

sure...
when i got the money...then i`ll inform to cloz this thread...