from my understanding, no service interval for it. change once the boot is broken, both inner and outer. need to and must change once you know it's broken, if not you might stand a change to change whole drive shaft 

i got my engine mounting changed early of this year, some 3rd party brand, should be able to get it at rm350~400, so far so good.

13" tire i'm not familiar, can't help much, time for 14" maybe?

the fan in the engine bay, there is only one, right behind the radiator.

that's because i got a cheaper price then outside + i install it myself, that's why overall is cheaper. nvm, i'll see if i can get quotation to change the engine mounting for Kenari and see how much it's.

my one just clocked 120kkm , auto , but Rm50 max only can go 330km .. how come urs can hit so high mileage ?

i have...my adivse... get the recond OEM one... at least it comes with 3 months warranty... brand new no warranty one... yes i know its weird.. dun ask why..

also getting compressors from other cars may sacrifice ur engine power...so seriously...my advise.. recond OEM

depends on whether or not it needs changing....

well, stocks also need to depend on brand and model. my gf's old wira running on 13" jrd, no issue at all also. also, try Myvi SE rims, brand? enkei 

Is aerosport rear spring stiffer than normal kenari?
Any higher damping rate absorber to recommend?

My one also same problem. i just change a recon compressor and condensor, fill in gas and ++++ RM650... aircond is cold when driving but while waiting people at idling it not cold at all.

some custom DIY work from me on my Kenari
[attachmentid=3080175]
[attachmentid=3080177]
[attachmentid=3080180]
[attachmentid=3080182]
Relocate switch + additional switch to control all LED.
[attachmentid=3080179]
rear number plate, customized work also.

How much is HWL ? U change whole set front n back spring n absorber?

Adjustable as in high low or hard soft?

got auto and manual, it's actually perodua original accessories, go SC and look for it, doesn't matter even it's for Myvi, is the same as Kenari.

haha you will need to go to SC to get it, normally they don't keep stock, i suppose.

at first install by myself, but ended up send to accs. shop as my drill bit is not for steel... there is four bolt and nut in total.

kklam jaesern~ lets YC again

any one upgrade their air filter, like k&n ? i know power sure got. how abt fc ?

Ya actually I'm thinking to change my Kenari tire rims and tires. I'm living in SS2, any recommendations? What tire should I buy... Please forgive me if i ask too much as im new and i dont really know much about cars! D:

Hi Guys, I own a Kenari RS 2006 edition. Need advise from sifus here about tire issue. Currently I'm using KUMHO 165/55R14 72V tire and insofar today, this should be my 5th time to change my tires after hitting too many pole holes on the road. And it's really frustrating..

I need a solution for this issue. I don't mind changing my rim if that solve my issue permanently.

TQ!

My car are using the same type of tire. Spoke to a tire shop. They say for my car there's isn't a permanent solution. So in the end I change to Good Year as they say it's the most durable one in the market. Hope that won't give me a problem for quite a while.

Either change to a bigger RIM or better tire?

yo~ anyone wan to have kenari trip together with me and jaesern?
location can be set somewhere everyone like

trip to anywhere also can, touge? 
the shop i went suggested me to do so, reason is simple, since you already pay for the labour to change timing belt, water pump is just another few bolt then done. it's more like a preventive maintenance as think yourself that if water pump start to leak after timing belt changed, worst if not very long ago, you'll need to pay the same labour again. well again, it's still your choice. if you've decided to change, ask for good one, or else water leak will still happen. also, remember to add coolant, not water