hi here the result,my cpu temp max 81,is that hot ?


Attached thumbnail(s)

The result for prime95,test completed in 5 hours 49 minutes with vcore 1.272,cpu temp max 82,gskill ram 2133mhz cl9 1.6v,is that pass?


Attached thumbnail(s)

can use water cooling for better cooling system

Ya but expansive ?

yup, around 250++, i used H50 corsair, so far so good, i love it

I'm using thermatake water 2.0 pro with push pull without aircond,I think need go for corsair h100.

Bro 82c when running stress tests are still fine, as quoted by Owikh bro as long the temps stays below 98c its ok cause during our usage temps are not often pushed to extreme height. For me when gaming my temps are around 68c MAX, and during stress test it reaches around 87c so in your case the temps might be slightly lower during your usage. Another thing is, are you running your Thermaltake 2.0 with Push & Pull fan configuration>

This post has been edited by scriptkiddo: Apr 8 2013, 02:04 AM

Hi scriptkiddo,yes im using Thermaltake 2.0 with Push & Pull fan configuration,my room temp 32c,if i switch on aircond temp will be 72c in full stress.

How much the temps will hit if you are stressing without the aircond turned on? Are you planning to increase your OC to higher clocks? For and i7 i see your temps are ok bro

Without aircond CPU temp full load will be 82c,with aircond around 72,I won't increase my clock any more,just stay 4.5ghz.

than your fine bro, no problem for your daily usage. Enjoy your speed, This cooler is just fine plus your aircond is there so confirm will turn on most of the time, chill bro

Ya that enough for me,thank for your advice.

Np bro, have fun cheers

What is the different between LinX's GFlops & Intel Burn Test's GFlops~? Coz I got different value for both..



This post has been edited by kherel77: Apr 11 2013, 02:15 AM

You are supposed to get the same GFlops.
Download the latest LinX from post #1 of this thread & make sure you are running it on win7 SP1 or win8.

Thanks bro. But I fried my Mushkin RAM while running last LinX attempt . Manage to get 106+ GFlops but CPU temp skyrocket until 94++ on 19th round, auto shut-off & can't post anymore. After a few trouble shoot, i found 1 of my RAM spoiled already.... Seems Linx is heavier stress than IBT.

New RAM set will be otw, & try to fork-out better cooler this time for my small casing...

This post has been edited by kherel77: Apr 18 2013, 12:22 AM

LinX and IBT are the same programs, they are using linpack libraries (AVX included). Only difference I can think of is that IBT has more preset options and a blinking flame; whereas LinX has an option to set priority.

So, i suspect you are using an older linpack libraries included in the IBT folder.

My i5-2500k running @ 4.0ghz for 1 year already, very stable. Never feel need to push more than 4ghz.

| 2500K | 5.0GHz (4C/4T) | Asus P8P67 Deluxe Rev 3.0 | Water

Nice try. But you are using the old version of prime95 (without AVX instruction).
The latest version is in Post #1:

Prime95 27.9 Build 1 X64
Prime95 27.9 Build 1 X86

Good luck!