i think u need to tap the wire only it works... btw i not so sure as well... as mine is ppl install for me...

bro, your image oversized la...

Sorry

Yup, Bro...
OEM ABL shld hv come with that one cable ready...did yrs hv it?
If so, yu need 2tap in2 the power line 2rear brake lamp.

If yr unit is truly OEM module, then the Alarm Reset Button above centre console is used 2UNlock the doors.

Best wishes!

Wait for zeone or others to come in and advise you.

My OEM ABL was installed by the seller.

ALso like this model?
My i no tap the wire... I oni str8 plug in the hole with that wire... Can like this?

Oh there you go

Bro how to confirm is truly OEM?

---

Added on August 15, 2012, 8:33 pmYup... My 1 got the yellow green cable...
I just plug in the hole with ori yellow green cable...
Is correct?

This post has been edited by badjer: Aug 15 2012, 08:33 PM

Yup, yu can also juz (as yu put it) plug in2 the same "hole" as the power supply cable 2the rear brake lamp.
Juz ensure that it's the correct "hole" and there is good contact in the "hole".

Many do that way cos of fear of voiding the warranty...

Frankly tapping might juz void ONLY the Alarm Sys which is covered 4only 1 year....

lol i just physically strip off the insulator and tapped the wire for my brake light..

anyway.. any recommended seller to get this ABL?

ps. Hi Every1!!
Me juz back fr dinner out....

Hope all hving good evening lo....

---

Added on August 15, 2012, 8:41 pmYup, that's reco way 2tap in2 another cable...
Even better 2solder the tapped joint!

Electrical/electronic circuits work efficiently with good & proper connections.

This post has been edited by zeone: Aug 15 2012, 08:41 PM

iszit got " OEM " mean will can use alarm reset button unlock?

Me got mine fr Bro Sh@rty5...but the OEM module is in proper fully protected hard plastc casing.
And it's more expensive...

The more common & lots cheaper ( abt half of wat me paid 4mine) module available via Mudah is a replica (IINM) module w/o a solid casing but the PCB is covered in a big shrink wrap...

This post has been edited by zeone: Aug 15 2012, 08:49 PM

all esso are now petron, period.

no need video lah... lol
difference is only negligible.

Chk all yr connection.
If ok & yu still kenot use Alarm Reset Button 2unlock doors, then probly module is faulty or that function is not 1 of the features in that module.

Mayb try claim a replacement fr Seller?

My 1 i cucuk like this... can o not?

---

Added on August 15, 2012, 9:11 pmAnd my module is like this de...


This post has been edited by badjer: Aug 15 2012, 09:11 PM

Can yu lock the doors by pressing on brake pedal?
If so, then that cable connection shld be in contact...

Do yr hazard warning lights blink when doors are opened?

If yu only kenot unlock using Alarm Reset button, then feel unit is probably faulty...
Confirm with Seller whether yr unit does use ori alarm reset button 2unlock doors.
If supposed to, pl tell him yrs kenot...try ask for replacement?

Best wishes...

This post has been edited by zeone: Aug 15 2012, 09:21 PM

I can lock by brake pedal.
Got hazard light blinking.

I ask him... He told me... He dunno got o not.
Then he tell me... Seem like dun have.

His answer is NO?
Meaning that module does not hv the unlock feature?
Then how are yu 2b able 2unlock doors?
Pull up unlock knobs @doors? The old way?
Phew....

Even a Universal module comes with its own unlock push-button switch!
Sorry, Bro...

He said he only know sell... Dunno got what features...
Then he ask his company said dun have oh...
( Got his function de meh ) He told me...
Use hand pull or close engine lo...
>.<