PG is STRIKE Freedom RG is Freedom.. very different

both Ver. Ka & Ver. EW is similarly priced between the RM120-140 range, but you might want to avoid Ver. Ka if you're not really a big fan of tedious decal jobs. Ver. Ka kits are well know for having TONS of dry transfers and clear stickers

it's not that hard but it sure is challenging due to tiny and fragile pieces. just need to be extra careful, others should be just fine

size of the MS are different.. Wing has a head height of about 17meters while Sinanju is about 23meters.. that translates to the model kit too.. 1/100 means it's 23/100, so it's 0.23m tall, or 23cm.. while Wing is 17cm tall.. same goes for 1/144..

thats why this hobby is a test of patience........

but think it through properly, whether airbrushing the kit will be temporary passion, or stays on forever....

are you satisfied with the kit, or wish to improve a little custom on it?

like HxiiiK mentioned, MS from Wing series are a bit smaller (and shorter) compared to those from Seed or 00 series, or those taller ones from Universal Century. the size of the kit is based on the scale from it fictional height, hence the different kit size even from the same MG line-up. not all Gundams have similar height

I don't have a MG Wing, since I'm not really a big fan of it. the one and only favourite of mine from that series is the HeavyArms
you can always visit http://gundam.wikia.com to check out technical details for various MS in the Gundam universe
best way to compare prices is to refer back to the original price in Yen, and convert it to the respective currency. some international sellers like HobbyLink Japan might have crazy sales with dirt cheap prices, but you might as well consider the shipping cost, too.

wing ver ka? It may end up disappointing u though, unless u r a big big fan of wing and dun mind its flaw. Let me list down some of the flaws for u:

1. Proportion is not so good. Despite it looking great from the pic, that is one of the very few angle that it'll look nice
2. Main reason proportion not good is the neck, its too short which leads to the next flaw; the shoulder vulcan cannot be open unless the head is facing forward direction. This is mainly bcuz the neck is so short, the "ears" on the side hinders the opening of the vulcan
3. To circumvent the above prob, the head must b facing forward (no turn, no looking at the side whatsoever) which gave rise back to prob 1. If u look straight at Wing from the front it'll look weird with its short neck.
4. Regardless of which version u get, forget bout holding the buster riffle. The old version doesnt hav a peg in its hand not sure bout the new 1 but even if it does hav it, its far too heavy. To hold it, u hav to tuck the back part of the gun under the shoulder armor to giv it xtra support or swing it across and hold it like shotgun. Unfortunately those r just temporary fix and u wont b able to hold it for very long, a slight bump or if u breath close to it it'll fall off. Bcuz of this the only way to hold it is to let the tip fall to the ground while holding it in its hand which mean u cant do much pose with the riffle.
5. Even if u did manage to hold the rifle via the shoulder armor, u cant depend on it cuz the shoulder armor itself is abit lose. The kit share the same frame as the Wing Zero  and in that version the shoulder armor is to slide out n folded down to make way for the angel wing, for ver ka/ew the shoulder retain this feature despite it having no use (Bandai being lazy here) this thus leading to a very wobbly shoulder.
6. The wing are just 2 big piece joint together no moving parts very underwhelming for a MG.
7. (this is personal opinion though) Too much color everywhere.

that bolded part may not apply always, u shud c HG Psycho Gundam size 

some places unnoticable.. but in GA the prices already went up by a few ringgit..

I gotta do what I gotta do
Yen exchange rate does have a raise compared to Malaysian Ringgit since early this year, and resulting a slight price hike for gunpla kits nowadays compared to let say, last year.

ini dia, my first AB kit...........



actually its all about interest only, some prefer to leave the complete kit as it is........

some must kasi repaint then only satisfied.......

this one my first AB kit.........done within 3 months of getting in gunpla..........

so if really interest in AB-ing, id say go for it

ingat pun...hehe

nah, i gip u jpg of ur backpack, shield and rifle together

Base Jabber straight out of the box 

speaking of prices, just went to survey today and from what I see there's no more obvious price gap between GA/GT after GT moved their shop. but their new shop is huge!  and much more arranged

btw, time machine is giving discounts 5% on model kits, 10-20% on other collectibles until tomorrow I think. It may not be much but at least u can save a few RM though
another news, be prepare for another stock clearance

asking the taukeh why they move, they said, rent price goin up dy at old place, since near to commercial stor, (mcd, bowling bla bla bla)
current pace is cheaper, so can maintain cheap price... he said la....hahah
but indeed GT is cheaper, bought MG Duel at rm145, while GA sells at rm155

nah

here's mine

OOORaiser + Seven sword + GN sword 3 +XN Raiser=?

waste me alot of money T_T

[attachmentid=2996586][attachmentid=2996587]
[attachmentid=2996589][attachmentid=2996590]

prepare another noob project^^ for 00raise

not necessarily i buy and assemble what appeals to me, of course does not matter what grade it is.. as long as i find it has a fun assembly and final look is very satisfactory, i will try to get it