Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed

Outline · [ Standard ] · Linear+

 I vow to never buy a Proton again..., ...even if I have to eat bread for 9 yrs

views
     
kidmad
post Dec 19 2012, 10:25 AM

Look at all my stars!!
*******
Senior Member
4,482 posts

Joined: Jul 2005
QUOTE(Alvin330000421 @ Dec 19 2012, 09:40 AM)
I also like you, I am stuck with my 10 year old proton.

When I first drove my proton, it was ok. But one day, when i break lightly, the car suddenly skid and spunned. I was concern so i sent it to the service center. At first they detected nothing. Then next thing while i was driving, a motorbike suddenly cut into my lane, I break lightly, then my car skid and spunned again, almost colliding with the motorcyclists. The car behind me hone me and show me his fist, he was angry and thought I was drunk.

Then after 2 months of driving, I notice the outer part of my tire botak. I send to service center again, it was then they found out that the factory never bother to adjust my camper screw, cause the tire to slant.

Wah proton got this kind of tidak apa attitude one ah? Almost killed me, man.

Most car manufacturers champion quality, make quality everybody's responsibility. But do you think proton people push the responsibility of the quality to their QC department? One wonders if proton just tidak apa attitude - assemble the cars and then leave the defects to be corrected by the service centers???
*
wah piang! you are obviously one ignorant driver. car skid in such situation and you blame proton when obviously it has something to do with the tires.. After 2 months only you go and check out what's wrong with the car? my mum drive 1st 1k also know how to bring the car over to service centre for reallignment cause lari abit...

The tidak apa attitude is from you not proton obviously. Even for KIA it's not recommended to bring back to SC for car allignment and balancing. Don't you know that SC are never good in this?

One more thing.. car skid it wasn't because of your breaking system. It's because your tyre has less contact/grip on the road. doh.gif
kidmad
post Dec 19 2012, 10:55 AM

Look at all my stars!!
*******
Senior Member
4,482 posts

Joined: Jul 2005
QUOTE(Alvin330000421 @ Dec 19 2012, 10:47 AM)
Eh, read properly...not only you tidak apa attitude but your eyes also tidak apa attitude. I suspect you are hired by proton plutonic people to scour LYN and seek to condemn proton critics like me.

Its the camper screw, nothing to do with the tyres. The tyres are brand new. The tyre botak at the corner so obviously the tire are at senget angles.

Because I didn't want to be longwinded, btw, I did take my car for balancing and alignment. I even change the tyres. The corner became botak again.
doh.gif i rest my case. Yes I'm hired to proton to be in lyn to condemn ignorant drivers about their lack of knowledge on what to do. You did bring for alignment and balancing? This... itself... telling me that you are lying... If you really did do allignment the thing would not cause your tayar to go botak.

Now i know where your RM5k of fixing come from. It isn't the brake.. it's your lack of knowledge obviously.

user posted image
kidmad
post Dec 19 2012, 11:12 AM

Look at all my stars!!
*******
Senior Member
4,482 posts

Joined: Jul 2005
QUOTE(Alvin330000421 @ Dec 19 2012, 11:08 AM)
yeah you're the liar.

The 5k is other things dealing with the disc brek and shock absorbers.

doh.gif  doh.gif  doh.gif  doh.gif  doh.gif  doh.gif  doh.gif  doh.gif

Whats the 5k got to do with the camper?????

You obviously google search for it and now you act like you know the world about cars.

I DID THE ALIGHMENT. READ MY LIPS. Or wear thicker glasses.

I SAID THE CORNER OF THE TYRE BOTAK, not the WHOLE TYRE BOTAK. Do you read my post or not or you just selectively read it to flame me????

WHEN CORNER OF THE TYRE BOTAK, means the camper not adjusted properly cause the tyre to senget. Hey if I knew about this, I will be opening my own LIM TAYAR SHOP. You are such an idiot...of course I dunno much about cars so why i bother to send my car to mechanic work shop.

I may lack knowledge but from this experience I know damn well about what cause my car to spun.

No wonder you are driving old tiaras and wiras because you spend so much money on repairs you can't afford japanese and continental cars.

Oh go ahead and show your national pride, stick to the proton...but don't stuff down other people's throat.
*
1st.. it's not camper
2nd.. When you did DO YOUR ALIGNMENT.. that nut will be adjusted. Now who's lying?
3rd.. You are just playing the blaming game for a mistake done by yourself. No matter what car you drive.. With the same attitude.. It will still cause you problem.

Nuff said. I wonder how long do you bring your pair of tires to the shop for tyre rotation and alignment.

This post has been edited by kidmad: Dec 19 2012, 11:13 AM
kidmad
post Dec 19 2012, 12:55 PM

Look at all my stars!!
*******
Senior Member
4,482 posts

Joined: Jul 2005
QUOTE(dares @ Dec 19 2012, 11:56 AM)
Dey Proton Spy!! Proton ade marah that you bought a Kimchi tak??  tongue.gif
Dey I ninja.. hiding..no one know i change from Nasi lemak to Kimchi. Hahahaha. Anyway the kimchi car impress few of my colleagues. now 2 of them already bought the car. My boss most likely will be getting it as well. LOL


Added on December 19, 2012, 1:02 pm
QUOTE(Alvin330000421 @ Dec 19 2012, 12:47 PM)
Nuff said, you can keep your proton for another 1 century. Good luck.

No wonder you still drive proton, must have spend so much on it until can't afford a better one.
Unlike you keeping the car for 10 years because not making enough to change a better ride.. i change from Kancil > BLM > Savvy > Forte in 6 years time. I'm not sure whether my current ride will last me 5 years or not but if I do see the next best buy i might just change it in another year or two. Oh yeah.. The kancil and Savvy had given me lots of experience in getting a car fix and knowing more about cars... Unlike you who play the blaming game and immediately blame proton for your own fault of not doing the proper alignment causing your tyre to go botak. AGAIN! it isn't your damn brakes problem.. It's your mentality. At least i know what is a camber nut as oppose to you who doesn't even know how to differentiate a camper and camber.

My BLM had never given me any issue and was diriving it until 60k km. Sending them back to Proton SC in Glenmarie before all the while before i sold it off for a 2nd hand Savvy.

This post has been edited by kidmad: Dec 19 2012, 01:02 PM
kidmad
post Dec 19 2012, 03:32 PM

Look at all my stars!!
*******
Senior Member
4,482 posts

Joined: Jul 2005
QUOTE(Alvin330000421 @ Dec 19 2012, 03:15 PM)
Who cares?

Kidmax is a smart alec jerk who flames other people. Can't even say things constructively without posting insults.

I know for sure, kidmax being a proton ultra, his car is not goint to go far....it will break down for sure. Protons, the power of tidak apa attitude.
*
Haha you are really good at twisting and turning your words. Now I'm the one flaming and ain't you the one who are lack of knowledge and posting craps without facts eh?
kidmad
post Dec 19 2012, 03:43 PM

Look at all my stars!!
*******
Senior Member
4,482 posts

Joined: Jul 2005
QUOTE(Alvin330000421 @ Dec 19 2012, 03:39 PM)
Yes your proton is crap...hahahahah

That is one fact. No twist.

Maybe you should flame your engine, its going to go obsolete.
*
Haha okay okay. Seems like you are "very knowledgeable" with proton engine eh? eh wait.. so campro is manufactured by whom? Daihatsu eh? The more you post the more ppl would know, you are just here to bash Proton. Well it ain't that strong but for Proton they did pretty well after the 1st gen of Gen2. Only the ignorants will still talk about power window failure. I bet it's you?

Topic ClosedOptions
 

Change to:
| Lo-Fi Version
0.0221sec    0.67    7 queries    GZIP Disabled
Time is now: 12th December 2025 - 05:35 PM