Welcome Guest ( Log In | Register )

Outline · [ Standard ] · Linear+

> AMD Socket-754 Overclocking Database, Athlon64, Sempron, AMD Mobile CPU

views
     
termignoni
post Jul 14 2006, 04:44 AM

i AM The Ultimate Driving Machine!!
****
Senior Member
597 posts

Joined: May 2006
From: Penang 2nd Bridge / MRT - V8 Kajang


QUOTE(jslut @ Jan 13 2006, 05:23 PM)
AMD Socket-754 Overclocking Database
for Athlon64, Mobile Athlon64, Sempron, Mobile Sempron & Turion64


09. xxxxx xxxx xxxx | superpc | 2277MHz | 1.45V | Sempron 2500+ E6 | AIR
10.
*
soulfly, where is da cpu-z and prime for superpc's Sempron 2500+ E6?? i can only find his Sempron 2800+.. plz update.. tQ.. smile.gif
termignoni
post Jul 16 2006, 11:00 AM

i AM The Ultimate Driving Machine!!
****
Senior Member
597 posts

Joined: May 2006
From: Penang 2nd Bridge / MRT - V8 Kajang


QUOTE(soulfly @ Jul 14 2006, 02:06 PM)
i think screenie image link dead already... pic is not displaying
*
ic.. can update mine..?? rclxms.gif

CPU: AMD Sempron64 2500+ @ 2.24GHz (320.1 X 7) 1.45V
Stepping : hard to remove waterblock..
Motherboard : DFI LANPARTY UT nF3 250Gb
Memory: 1024MB OCZ OCZ4001024DCGE-K Dual-Channel PC3200 SDRAM
TIMING: 2.5-3-2-5 (CL-RCD-RP-RAS) 1T
Memory speed: 186.7MHz DDR373 2.8V
Video card: ATi Radeon 9600XT AGP
PSU: ACBEL IPOWER 450W
CPU COOLER: Cooler Master Aquagate Mini R120 Water-Cooling

user posted image

This post has been edited by termignoni: Jul 17 2006, 04:29 AM
termignoni
post Jul 16 2006, 07:34 PM

i AM The Ultimate Driving Machine!!
****
Senior Member
597 posts

Joined: May 2006
From: Penang 2nd Bridge / MRT - V8 Kajang


QUOTE(soulfly @ Jul 16 2006, 11:32 AM)
how come watercooling only 2.24ghz? that's low man....
*
i know.. bootable at 2310 (330x7) but only for like 5secs.. still trying though, need to learn somemore.. any sifus here care to guide..? biggrin.gif

This post has been edited by termignoni: Jul 16 2006, 07:39 PM
termignoni
post Jul 16 2006, 08:45 PM

i AM The Ultimate Driving Machine!!
****
Senior Member
597 posts

Joined: May 2006
From: Penang 2nd Bridge / MRT - V8 Kajang


QUOTE(soulfly @ Jul 16 2006, 08:08 PM)
I'm not really familiar with your RAM characteristic.... what is it originally rated at?

Anyway...try this....

DRAM Frequency Set - 150 (DRAM/FSB:3/04)

Command Per Clock (CPC) - Enable
CAS Latency Control (Tcl) - 2.5
RAS# to CAS# delay (Trcd) - 03 Bus Clocks
Min RAS# active time (Tras) - 07 Bus Clocks
Row precharge time (Trp) - 03 Bus Clocks
Row Cycle time (Trc) - AUTO
Row refresh cyc time (Trfc) - AUTO
Row to Row delay (Trrd) - AUTO
Write recovery time (Twr) - AUTO
Write to Read delay (Twtr) - AUTO
Read to Write delay (Trwt) - AUTO
Refresh Period (Tref) - AUTO
Write CAS Latency (Twcl) - AUTO
DRAM Bank Interleave - Enabled

DQS Skew Control - Auto
DQS Skew Value - 0
DRAM Drive Strength - AUTO
Max Async Latency - 8.0 Nano Seconds
Read Preamble Time - 6.0 Nano Seconds
IdleCycle Limit - 016 Cycles
Dynamic Counter - Disable
R/W Queue Bypass - AUTO
Bypass Max - AUTO
32 Byte Granularity - Disable

LDT multi = 2.5x
*
thx bro.. will try tonite.. da stock @200MHz is 2-3-3-7..
termignoni
post Aug 29 2006, 04:45 AM

i AM The Ultimate Driving Machine!!
****
Senior Member
597 posts

Joined: May 2006
From: Penang 2nd Bridge / MRT - V8 Kajang


QUOTE(Najmods @ Aug 26 2006, 02:53 AM)
8 hours prime? Thats ridiculous. Why need 8 hours, to prove PC is stable?
*
yes la bro.. then why bother OCing to the max if ur pc is not stable.. that's why there are several catagories.. prime stable, benchable and bootable..

btw, congrats for getting 2.64GHz from ur 2500+.. would love to see some screenie and cpu-z.. biggrin.gif

This post has been edited by termignoni: Aug 29 2006, 04:47 AM

 

Change to:
| Lo-Fi Version
0.0196sec    0.96    7 queries    GZIP Disabled
Time is now: 2nd August 2021 - 03:09 PM