got angpow lui go mod bike liao?

then I get a lambretta to smoke you.

250cc...

look for lambretta and vespa clubs...

...

This post has been edited by alexei: Feb 25 2013, 11:40 PM

Ride bike use a more fitting baju hujan better... longgar longgar tu not nice la.

It is possible, add turbo like those salt lake trials... matching the gearing and rpm properly will achieve something a 2 stroke cannot compete.

Riding jacket wise, get a tougher material, not just sembarangan nylon polyester made.
I wear a Mizuno Superstar for 10 years it still looks ok. YKK zipper still smooth and firm. Cost me RM10 from flea market last time.

my 2 sen.

your KR ready?

Last time I found a Victor for RM850, but too late the bike got sold... good luck bro.

I know Super KIPS is the best one, but, the parts are the hardest to find. Especially the electrical parts. Ok, once a while only I mudah-mudah and see if got deals or not, then let you know.

Seriously, given the price of a used 2 stroke bike nowadays, in the long run over 5 years of use, it is lower ownership cost and higher satisfaction.

RM2.5k for 2 biji... I would get this one: http://www.mudah.my/Kawasaki+victor-20333541.htm

AHM M1 is the best in power, I remember? Some prefer CJ Ipoh.

Yoshimura is very good for stock engine.
Not sure about the LeoVince, anyone?

Look for the bikes forum under 'forumotion'. There are kips, tzm, 125z, FZ150i etc... direct deal with seller.

MBB also got: http://malaysianbikers.com.my/forum/index....board,13.0.html

HID considered illegal modification.
If use HID bulb on non-HID lamp, it will cause glare or silau to oncoming cars. It must be the correct HID lamp, like a projector.
HID need to have the cut-off for low light.
http://blog.onexhid.com/purpose-of-hid-cutoff-line-pattern/

That is normal bulb, can use right?
I cannot comment on the result, because the photo angle and the exposure setting different. Unless use same camera, same angle, and same exposure setting then can see. The best one, would be side by side comparison with a new OEM bulb.

The bulb is bright, but the headlamp only 1 tompok in front, ok ah?
I prefer the headlamp that covers a wide area in front one, which is why I mod my headlamp, using oval projector headlamp. But problem is the light is spread out, so it will only show the pattern when the surrounding is dark.

NASA last time good oil, like JTX also they do road show, using the torque load bearing method. Not sure for bike. Ada gambo?

This post has been edited by alexei: Mar 5 2013, 11:41 AM

Anyone did headlamp wiring before? Is there a resistor from alternator to the headlamp wiring?

I need to check my bike wiring. Battery charging is 15.5V, but headlight only 13V. When loaded with HID ballast, drop to 9V. So, I suspect there is a resistor or poor contact.

Ask this forum one? Tarak...
I think he don't know how to do research.