Core speed = 2520mhz
Mem frequency = 229.1mhz
Name = snif
Revision = E6
Mobo = MSI K8N Neo2
RAM = 2x256mb Mushkin
Voltage = 1.420v
CPU Temp at load = 42c
Cooling = STOCK!

dont wanna push higher.. coz using stock cooling scary


Attached thumbnail(s)

You can still push it a lil since your temp still low btw do confirm the temp in bios,55 c + on load bring no harm i guess
1.402v is not an obstacle ,check it out in the first post.

Btw your chip's week?

hmm... ya I know I can push it a little bit.. but im scared! haha.. btw mine is
lbbwe 0542gpfw

Updated

LBBLE 0522 FPBW

Idle temp - 41C-43C
Full load - 50C-53C
Vcore = 1.475V
Vdimm = 3.20V (512MB TWSP BH-5)
LDT = 3X
HTT - 303x9
Mobo - DFI LP UT NF4 SLI-D
HSF - AMD STOCK HSF

Updated.I think this is the max for my stock cooler and i think i'm not going to raise the vcore anymore


LBBLE 0522 FPBW

Idle temp - 41C-45C
Full load - 50C-55C
Vcore = 1.5V
Vdimm = 3.20V (512MB TWSP BH-5)
LDT = 3X
HTT - 306x9
Mobo - DFI LP UT NF4 SLI-D
HSF - AMD STOCK HSF

http://i22.photobucket.com/albums/b325/nelza_ax/panas.jpg

hot2.. ..
sorry2..not reading the term at least 8hour....so sorry..

This post has been edited by nelza_ax: Mar 11 2006, 09:21 PM

2.4A?... that is normal for presscott..
at last a result from intel chippie..
longer prime?.. can it stable for more than 8 minutes?..

ey..i've try it for 8hour lar ..but my screenie lost sumwhere ..cannot find it..
3.7 on default vcore @stock cooler..

1.425v @4.0 wif hyper6

This post has been edited by nelza_ax: Mar 11 2006, 10:19 PM

u can prime another.. just the SS lost not the procs rite?..

yeah..now still priming..2hour oledi..maybe tomolo can post the result

No database for socket 754's ?

Thread/database starrter always busy.

how to make a database when there is no result meh..

Start first,then the results will be posted by forumers lo.Now they might thought this database only for s939.

i wonder y dun hav any intel n soc 754 here

when i hav time , will prime

everyone !!! , get ready ur results :lo:

Congrats to the new king of the hill !!!
I think you can go further, your voltage in CPU-Z is only 1.456V.
I think you have a perfect gem (Diablo 2 term) in your hands.

btw, can I use your post #2 to update results for Intel?

I don't think you can edit other forumers post,that's why i was curious you ask forumers to update their result by editing?how ler..but if you want the 2nd post,try asking moderating team to edit them.I have no objection

Arrgh...now I understand....why everybody is waiting for me.

My stupid mistake.
My dumb blindness.
My bad.

Ok, can I nominate you (kingmaker_20) to maintain post #2 for Intel results?

what PSU did u used? Mine cannot prime at 2.7ghz, 20 minutes prime and got error and keep rebooting at 310x9