sorry...have to post here seems nobody know the VOICE password... is it just +1 at the back of the VOICE username?

Guys,

Can someone help to provide guide step by step on how to configure Alcatel Lucent BTU to output VLAN 621 to port 2 and other VLAN (i.e VOIP) to other port

I have my own router with DD-WRT; however it doesnt really support VLAN tagging

Note Alcatel Lucent only works using command prompt; hence the guide in this page is not gonna work

have you set Port forwarding correctly on the thompson? Most likely you have set port fwd for ur VPN on the dlink but not on the thompson

---

Added on July 9, 2012, 6:13 pmhave you set Port forwarding correctly on the thompson? Most likely you have set port fwd for ur VPN on the dlink but not on the thompson

This post has been edited by iZuDeeN: Jul 9 2012, 06:13 PM

so nobody knows a telnet command to set the Thompson as Bridge? if not port forwarding ccant work properly if install another routerboard

im on Alcatel Lucent.. cant set the BTU... planning to use the Thompson as bridge and use my existing Belkin router

my Belkin doesnt have proper VLAN capability (DD-WRT firmware0

not sure if gonna help, here's the VOICE SIP listing