price is not the main factor. what most importantly is compatibility & workability. that most important of all is will it meet users expectation?

in fact the most expensive device not actually has best compatibility.

simple... just TICK LAN2 on both Port Binding and VLAN Tagging.
UNTICK LAN3 on Port Binding ONLY!

reverse the step and you are all done

i already configure it the pppoe, wifi and connect to thomson for VOIP

now i use it for online...so far very stable for 2 day and my voip also working.

not like last time, using thomson always hang, Wifi problem and VOIP also not working after few hour.

Yes that's why I suspect from your VLAN ruling in your TP-Link router, the Huawei modem settings for its LAN2 port which you connect your router to it has (port binding + vlan tagging) ticked inside its settings.

So in your TP-Link router, for the VLAN ID=621 ruling inside, you OFF them all from port 2-4 and they're the ones allowed to access the internet.

For your port1 which you use for VoIP, you re-tagged them with VLAN ID=822 again so it can be forwarded to the next device.

If you still need the Voip, you can try my setting using tplink wr1043 and flash to openwrt. U don't need to change anything setting on modem. Just connect the tplink to modem lan2, then Thomson connect to tplink lan1.

If I not mistaken, the setting I set can be use for all modem. But I'm only tester on Huawei modem and not yet test on other modem.

U need to get a router where can support.

For my setting,

U need to get tplink tl-wr1043. Flash it to openwrt, apply setting and u can refer to klseet. Cause my setting is base on him.

Then connect it to alcatel lan2, and ur Thomson is connect to tplink lan1.

---

Added on July 15, 2012, 8:17 pm

Is vlan 822

This is my first time use openwrt. as what I understand, the CPU is mean Router.

the vlan ID 822. the LAN1 or Port2 is connect to any other VOIP device. I using thomson for VOIP.
I try not to do any change on huawei modem. to make it simple, in future any problem with the modem, just call maxis to change it. it can be any brand and model. as long as maxis still using VLAN ID 621 for data and 822 for VOIP
It should work on all modem.

[attachmentid=2949146]

Please double check ur username and password is correct. If u ask for public ip from maxis. Make sure ur username is public.maxis.com.my

In wan, physical interface, interface
Which one u select? U need to select vlan interface eth0.621

This is Wat I connect. And it work for Internet and Thomson also working
Can u take a photo on vlan page?

If the DHCP server is working. Then u don't need to do on ipv4

I think u better reset your router. Follow klseet setting, ignore vlan 500,600 , iptv setting and just add vlan 621 only. If working only add vlan 822