sup guys..checking in..done 'the prime test' for 1 hour..this is the result


Hirie | 3570k | 4.7Mhz | Asrock Z77E-ITX | Water

p/s: got BSOD with 0x9C after restart , increased Turbo Voltage..hopefully its stable

This post has been edited by hirie: May 12 2013, 09:38 PM

bumped the offset voltage to +0.060v(suspected due to bluescreen on idle), turbo voltage at +0.133..run the custom blend test and got screen lockup at 1hour mark..restart pc and it cant post and cycle many times w/o ending..cleared cmos and still the same..removed 1 ram stick, it able to post, remove the other and install back, able to post, resitted both ram, able to post..any1 can tell me what im dealing with..hehehe and do u oc on offset or fixed voltage..

thx for that..will look at it in near future..gonna settle for green overclocking for now..i guess that 4.7GHz is one beginner's luck..hehehe



This post has been edited by hirie: May 13 2013, 04:52 PM

trying my luck with rog board..



Hirie | 3570k | 4.7Mhz | Asus Maximus V Gene | Water

Yeap..aircond fullblast..haha..w/o lowest will be 24~25 for tht core..

I think it become more stable cos i got some random bsod on my previous board..its just an opinion..maybe im wrong..any taiko here can correct me if im wrong..hehe

try running it at lower frequency, maybe ur chip has low imc strength..hve to ask otai here also..hehehe

U shud try to run ur ram at 2400mhz at stock cpu speed n see how it goes..overclocked cpu may hve issues running ram at high rated speed..and try adjusting ur qpi/vtt..it might help..