the new lean exp4 really hard uvolt.. cuz the value are either low ardy.. drop 50v all then sure hang..

Guys, Any idea how to update the ICS to 4.0.4 ?? mine had already rooted...

This post has been edited by oOoproz: May 6 2012, 06:23 AM

umm
use this http://forum.xda-developers.com/showthread.php?t=1392310 and place this https://developers.google.com/android/nexus/images#yakju then can adi, fastest.
or use cwm and place https://developers.google.com/android/nexus/images#yakju and push it

i need a recommendation of a good quality screen protector because the one i got from the shop makes the screen pixel visible. idk if this is normal or not. the grainy rainbow coloured is very annoying especially when the screen colour is bright. is it because the screen protector is not good? i chose the matte type of sp.

will any sp recommended on the first page clear this problem?

nilkin matte sp.

Ask opera33 he sells, and ask droidxxxx9 what version of sp he uses.
i herd issoo good, it shows hd quality and gives siney effect.
matte is generally a nono esp on cheapo 1..
highend matte will still remove 20% quality so

Guys, for those on AQOKP M5 roml do you run into the problem where calendar, gmail, etc. sync in background every 30min or so while u were sleeping?

I woke up this morning and check the battery usage, to my surprise all those back ground sync happen eevery 30 min while i was sleeping for the last 10hrs.

I already have the account sync setting off in setting... anything else i missed?

did u turn on power savings mode?
if so turn it off

Urm, custom UV or whut?
Imosyeon never do any UV default for you?
I try and no hang leh....?

LOL~ you try aggressive UV. Imosyeon and Jake already disclaimer said not all units can be UV by 50~ O.O
The -25 one should be fine for you...

This post has been edited by droid13579: May 6 2012, 11:31 AM

i mean lean exp4 defult settings..
i drop all 50 like i usually do, then reboot.. very strange.. cannot set the values i used to set..
but it could be with set cpu.. cuz 1st time properly uvold using it..

Nillkin Crystal
Nillkin Diamond
Nillkin Clear
Nillkin Matte
Nillkin Mirror

(Now I become promoter... but no doubt their quality is )

---

Added on May 6, 2012, 11:33 amTry use SETCPU and set at boot :<

If not leantweaks script~

(I thought u UV-50 then hang -.-)

This post has been edited by droid13579: May 6 2012, 11:33 AM

i might come back to malaysia yr end to buy
if still got stock from users..
crystal or mirror

wokay, will consider!

as long as the grain is gone can ady

nope, i set all the voltage in setcpu then i turn the page, hang beep, reboot...

Mirror, Diamond, Crystal need get from taobao.
(Opera33 only got crystal)

Clear and Matte most garage sales have it

read above post, droid xxxx9 jsut posted the list of good ones

Seriously, you don't want to use ROM control ones? Works same as SETCPU.
Try -25~-40 ?


This post has been edited by droid13579: May 6 2012, 11:38 AM

yeah, after drop 50 2 times, i set 25 then ok. then 25 again reboot
now just using 25 below defult excpt 60 below defult for 180 and 350

Should be fine in-most cases. I go check exp 5 out already or not~

right just realised

mirror looks interesting