Neobuddy kernel

Adjust the grid size : no of rows and columns - you will find aright match

---

Added on April 25, 2012, 8:18 pmBuy it from www.sygic.com after the 7 days trial expire

This post has been edited by benny888: Apr 25 2012, 08:18 PM

Their prices fluctuates ; I first paid Euro 30 for it in 2010 . Subsequently I bought 2 more licences , one at special rate Euro 9.99 and last was Euro 14.99
If you change phone, licence can be transfer - just email them with your phone new IMEI

papago X5 and Mp also cost RM 99

This post has been edited by benny888: Apr 25 2012, 08:45 PM

Yes, you pay one time only and you can transfer licence as many times you wish but only one licence valid on one phone
Unlike Papago - you cannot transfer licence

Not necessary to use these files. Ignore it
Just select tar file as PDA will do

Redo it
Follow instructions in post #6 strictly
TS has summarize a good guide for newbies

1 is good enough. Fast n easy within secs

No need. You can clear it any level

---

Added on April 26, 2012, 12:38 amJust ignore the other files. Select only pda tar file

This post has been edited by benny888: Apr 26 2012, 12:38 AM

His upgraded version .26 already up. Must do wipe data if you are already on .25 due to change in mount points. Faced plenty fc n unknown errors trying to do it
So no choice did a wipe data n spend another 15 mins restoring through titanium backup

---

Added on April 26, 2012, 7:41 amUse back old download n redo it
Not necessary must use the spore file
As long as rom is pre rooted you will be fine
I have help users using India n various Europe versions too
Counter check your old download is good. See whether you can successfully extract down the tar file in your pc


This post has been edited by benny888: Apr 26 2012, 07:41 AM

Mine Max 35+ degree only on 2 hours charge
Don't think is rom issue. Was other apps active refreshing or updating
I never exceed 40 degree in all the ICS roms I have tested
BTW stunner is now on over 26

I don't think so as only .25 he change mount points
Just try first without wiping data

Change log provided in his first post. Most important is change of mount points

LP6 kernel will be install with his rom

Great as usual
No major problem found so far. Just only 2 hours on this .26. In fact I don't even have any problems on .25 but neobuddy succumb to user complains about change of mount points n released .26

Is not buggy at all. People resistance to change blah having used to the norm.
In standard aopk ext SD is mount as /mnt/emmc while internal SD is /mnt/sdcard
In .25 he reversed it following new cyanogen format
Advantage you can now install apps directly on ext SD card which is by default. Isn't that great but most users cannot accept
So he reversed it back to ext SD as /mnt/emmc n internal SD to /mnt/sdcard
So .26 is normal standard as .19

---

Added on April 26, 2012, 9:37 amBatterylife widget
Plenty of such apps in market

This post has been edited by benny888: Apr 26 2012, 09:37 AM

No need pc
The fact you are asking show you do not understand the flash process
Once you have done a backup through recovery you can always restore your backup through recovery
The CF repack is the original Chinese leak lp1. It is recommended to flash to ensure full root

---

Added on April 26, 2012, 9:42 amToo long to list more than 150

---

Added on April 26, 2012, 9:44 amNo need unless you can live with task manager at home button is disabled
However subsequent updates you still need wipe data to update as mount points changed back to .19 format
Some users comments reboot .25 goes to boot loop an issue he had corrected in .26

This post has been edited by benny888: Apr 26 2012, 09:46 AM

Just read post #6 - is well written by TS

I did but plenty of FC and other errors. Main reason the mount point have change and many apps failed to be located. If you have installed .25 ontop of .19 earlier on, you might not faced so much issues as the apps installation now follow back .19. When I was on .25 i did a fresh reinstall of the apps and most apps now installed on ext sdcard causing all these FC issues and other error
You can try to do a dirty install without wiping data

Post # 6

No. You install LP1 kernel - you will get LP1 kernel. It is only those later LP5 roms that use LP1 as base will replace it with LP5 kernel