Petronas says its floating LNG plant could be first to market

See the 3D Modeling at the left bottom of the slide. Source: Ir. Roslin.

This post has been edited by ch_teo: Mar 8 2012, 12:24 PM

sketsa HSE ONGC B193 Project- SDE, Pasir Gudang, Johor.MOD

This post has been edited by ch_teo: Mar 8 2012, 09:10 PM

Petronas sees growth slowdown until 2014

Keppel Offshore & Marine Jobs Vacancies 2012 in Singapore
in a newspaper sometime ago...

it is not about o&g listen here there and every1 wanna join.
it is about whether one has the capability & interest to study petroleum engineering.

if there is e&p, then there are jobs. but econ downs, then only service & repair jobs. that is how my company able to survive all this while since 1970s until today with company name has changed for a few times due to different stakeholders. during econ down, we survive by service & repair octg and some new octg fabrication.
good time, we are able to get 5-6 months bonus. down time 1-2 months bonus.

if high e&p, we have lot of tenders with high profit margin & ROCE besides the usual service & repair and new octg premium connections fabrication.

3 months in semi-con industrial training as secured by university long time ago, i have never applied any single semi-con after graduate until today.

This post has been edited by ch_teo: Mar 21 2012, 05:09 PM

from my observation from their certain advertisements, all this while with 3.5 cgpa.

This post has been edited by ch_teo: Mar 28 2012, 08:02 AM

apologize no offense. honestly, after 5 years still asking this kind of question and with P&W. though it is different geographical location.

rotating equipment

This post has been edited by ch_teo: Mar 29 2012, 07:46 AM

there is a new set-up halliburton completion tools plant at Tuas, SG.
halliburton

have another posting which requires Degree/Diploma in Mechanical Engineering and minimum 5 years experience in premium connections (VAM, TSH, JFE, etc)& API connections , not advertised. If you are interested & meet the requirements only, can PM me for direct HR recruiter contact details. if you do not meet the requirements, i will just ignore your PM as they are only looking for experienced personnel for this post, apologise.

This post has been edited by ch_teo: Apr 4 2012, 01:08 PM

If i were not wrong, they may be parring your qualifications to diploma. i believe they are looking for diploma/fresh grad degree holders if based on March 2012 advertisement.
it is a good kick-start for you as you have zero experience. unless you have something very good to bargain with.
many years ago, i survived in KL with MYR2.1k fresh grad with 1st class at construction consultant. then after probation, performance appraisal and company-jump more & more.

MYR2.8k western MNC perhaps or you have a very good 1st class degree/grad from reputable uni. or depends on the company current on-hands available projects & cash flow, capex/opex and many other factors.

it is not just generalise with "RM2.8k...the market now..."

if you have been long enough and competent, you will know your legit* sources.
google if you are not.

---

Added on April 10, 2012, 5:05 pmalso qualifications. some MNC needs at least a degree/MBA to be promoted. certain experience may compensate the qualifications if the company not able to find the specialist.

benefits, depends on ranking also.

LTI /=LTE

This post has been edited by ch_teo: Apr 10 2012, 05:18 PM

because certain people do not understand the petroleum economics and the operations, e.g., marginal oilfields.
people just wanna go join o&g because of the trend.

Kencana starts to recoup investment in Berantai oil field in 2 years

This post has been edited by ch_teo: Apr 11 2012, 09:26 PM

i hope the following help. whatever is in my mind right now. Shell is practicing color code for the webbing sling. the webbing sling width normally >10% wear & tear must be replaced. MPI/PT inspection & load test. safety latch at the hoist, limit switch sensor. the 5M: machine, material, medium, man and method. risk assessment & permit to work. wind speed. signal man & rigger man....
LOLER
if you can find the book from National Safety Council, Accident Prevention Manual Engineering & Technology 12th Edition, 2001. @ chap 15 Hoisting and Conveying Equipment.

---

Added on April 12, 2012, 9:38 pmmany years ago when i was fresh grad, was offered on-spot in the Sat morning by the MD. the office that time was not in shah alam. can't recall the post need to go offshore by boat, arrange equipment packages logistic, installation, etc... but i did not take the offer. that time the office was like a 1-man show ...from the website, now it looks improvements...

This post has been edited by ch_teo: Apr 12 2012, 09:39 PM

also API RP 2C & 2D if you are interested. one of our plants in indonesia is doing lifting gear inspection.

that is why i don want to response to him though have infos.
what is more 5 years & with reputable company P&W.

If anyone interested. 17th Asia Oil Week 25-27 June 2012, Singapore

a friend in Shell is looking for Rotating Equipment Maintenance Engineer based in Kota Kinabalu, offshore, working under him.
Degree in Mechanical Engineering with positive attitude, minimum 5 years working experience.

if you are interested & meet the above requirements & willing to be based at KK only, pls PM me to vet your CV a.s.a.p. and i will direct your CV to him.
if you do not meet the above requirements, i will just ignore, apologise.

thanks.

This post has been edited by ch_teo: Apr 17 2012, 10:00 PM

you should read this.
also follow-up on business news. and check with friends/networks in the field of the actual situation.

imho, for msia, year 2012/2013 are years which projects are tendered and evaluation will be done. perhaps end 2013 or early 2014 when tender will be awarded. our company with no major tenders since around 2 months ago. only this month onwards some discussion on larger tenders/sales orders with our clients.
you can notice 2012-2013 is a recruitment year where companies are planning for the resources which expected to kick-in 2013/2014. recruitment cycle may take few months to 1 year or even more.
from a friend's source, expecting Q2 2013 they will be requiring more hiring or at this particular timing all their resources are in full gear to stand-by.

if in cameron in fabrication, you are expecting to deal with lot of API 6A, 1104. ASTM A370, A388, E420, E94, E747, E709, E165, E10, etc.
i can't deny fabrication knowledge will be in great help in consultant later stage. and designers makes fabricators' life/ field users (engineers) sometimes miserable with not practical parameters. some are designers without field experience/fresh and this is very headache which we always encountered, not considering the field usage and machines capabilities and existing technology & human skills can achieve or not. we need to call them in to discuss to re-evaluate or modify their design.

This post has been edited by ch_teo: Apr 20 2012, 08:25 AM

OCTG

sample for you to kick-start.
keywords start from API connections, then further to premium connections.
carbon steel, martensite, super martensite, etc.
grade H40/J55/K55/L80/N80/P110/Q120. Q120 highest. depends on well with CO2/H2S usage.

This post has been edited by ch_teo: Apr 28 2012, 01:06 AM

sometimes, the superior needs someone who can follow instructions and mingle well with others as a team. or perhaps the chemistry with the one who will hire you.
and many other reasons.

i was rejected by a norwegian company though i passed excellently 2 tests. no reasons were given though have asked the HR. except my evaluation results.

This post has been edited by ch_teo: May 13 2012, 04:22 PM

tubular:
there are pup joints, tubing, casing, accessories, subsea equipments with various type of connections API and premium connections.
precision machining, swaging, stress-relief, plating, hydrostatic pressure test, welding, hardbanding, blasting, phosphating, coating, make-up (tong), NDT, etc processes involved in producing the OCTG OCTG.
sizes maybe from 2", 2.3/8", 2.7/8", 3.1/2", 4", 4.1/2", 5", 5.1/2" and maybe up to 48", length may range from R1 (4.88-7.62m), R2 (7.63-10.35m) or R3 (10.36-14.63m), depends on well depth.

there are conductor casing, surface casing, intermediate casing and production casing (liner) in a typical well. drill with mud as cutting fluids in the annulus with the help of drill bit and drill string, then cement with float collar and centralizer. make-up (tong) those casing from few hundred ft to thousands ft. then continue to drill to cement up those casing in sequence. during these processes, the well may face pressure loss, kicks, may require shut-in and kill, or stuck pipe and require fishing tools.

This post has been edited by ch_teo: May 30 2012, 09:39 PM

MJSB

---

Added on June 7, 2012, 12:32 pmThis post has been edited by ch_teo: Jun 7 2012, 12:32 PM