Welcome Guest ( Log In | Register )

Outline · [ Standard ] · Linear+

 Exclusively for Perodua VIVA Owner - v4, Viva ~ Driving Possiblities

views
     
paperclip
post May 2 2014, 10:55 AM

New Member
*
Newbie
0 posts

Joined: Aug 2009
Hye all, viva full tank how much rm? I read from perodua site told fuel tank capacity was 36litre so its around rm75 of ron95....
paperclip
post May 19 2014, 02:32 AM

New Member
*
Newbie
0 posts

Joined: Aug 2009
QUOTE(diadokmai @ May 14 2014, 04:25 PM)
hi viva owner.
just wanna ask.
how much average fuel comsuption for city driving and normal driving for VIVA ELITE or VIVA S (1000cc) model

possibly in L/KM

thanks. plan to buy one fuel saving car for daily work
*
mine rm10 = 4.76l = 60-70km (let say 65km) 100%town driving...So it 7.33l/100km
paperclip
post Aug 10 2014, 09:54 AM

New Member
*
Newbie
0 posts

Joined: Aug 2009
QUOTE(LDP @ Jul 23 2014, 02:47 PM)
That is a good question. You can try asking the SC on it.

When I went to Sanden, they asked me to do a minor service once a year or at 20K - 30K km.
*
Aircond regular check at 20k, like replacing cabin filter, and check gas pressure.

40k full service, replace new gas and oil, cabin filter, receiver drier, and so on. Its recommended to use cabin filter, it will reduce ur aircond maintenance costs....
paperclip
post Aug 11 2014, 11:18 AM

New Member
*
Newbie
0 posts

Joined: Aug 2009
QUOTE(abec @ Aug 10 2014, 10:08 AM)
cabin filter ? u mean under the passenger dashboard ? that one we need to diy install ourself or perodua sc do it for us ?

user posted image
*
QUOTE(Rascal Stitch @ Aug 10 2014, 10:27 AM)
if u lazy enuf then sc will do for u wit more $$
if u hardworking enuf then u'll save on a lot of $$
*
The slot is there, but no filter inside.
U can diy, sparepart shop sell it rm20.... Someone sell here rm9, buy 2 free 1.... I install at day 1st received my car

This post has been edited by paperclip: Aug 11 2014, 11:19 AM
paperclip
post Aug 26 2014, 09:02 PM

New Member
*
Newbie
0 posts

Joined: Aug 2009
QUOTE(Dreadsic @ Aug 26 2014, 06:16 PM)
:: why u wanna change to sport spring since now using spring potong/bakar to make it lowered?
lowerd car with stock absorber is not a best mix already no matter with sport spring,potong spring or anything.
but its still ok to using this setup to save $$.if you happy with ur car high now,let it be.fund to another thing
just my 2cent.correct if wrong biggrin.gif
*
👍 agree with u.....unless u planning to use adj abs....
paperclip
post Sep 1 2014, 09:02 PM

New Member
*
Newbie
0 posts

Joined: Aug 2009
QUOTE(patrick94 @ Aug 31 2014, 10:15 PM)
hi guys, my viva is first batch* not viva Elite...
the door is really really sux, my friend viva elite door still better...
everytime i close the door really sounds like the Milo can.. q=.=p
and also when i open loud volume i can hear some treeeee sound from my door... because the steel inside the door is vibrating~
and my friend ask me to do soundproof... is it really can solve the problem and decrease the noise from outside?
and also the rubber seal soundproof good?
Thanks smile.gif
*
u can check prev page, ive done soundproofing to my prev viva using stp soundproof....door closing n open even more solid compare to my suprima....

but b4 proceed with soundproofing, u should unless understand fundamental of soundproofing. Different material give different result, but since viva is really like a milo can as u said, u will need every material if u want conti-like driving experience. So for viva, u should start with 'vibration damper' 1st....

This post has been edited by paperclip: Sep 1 2014, 09:29 PM
paperclip
post Sep 1 2014, 10:48 PM

New Member
*
Newbie
0 posts

Joined: Aug 2009
last time i bought stp gold 550/box....got 10sheets inside. But stp gold very expensive now, use silver or i silver would be ok....Crucial parts for viva at all 4 doors, spare tyre area, and front floor area.... start using one material each time, so u will know the effect of each material...
refer page 26, my post was there....
paperclip
post Sep 3 2014, 01:11 PM

New Member
*
Newbie
0 posts

Joined: Aug 2009
QUOTE(patrick94 @ Sep 3 2014, 09:58 AM)
Wow just saw it, quite cheap you bought~!!
you still rmb how many sheet needed for 4 door?
you use dampener?
*
I use 1sheet per door, 100% coverage...But from StP videos on youtube, they said 70% of coverage enough d. StP gold/bomb/silver/i-silver was dampener, use to make thin metal sheet thicker and more solid, thicker metal sheet mean to reduce vibration, so it reduced low freq resonance from outside...
If install at door, u get solid door opening n closing, clearer sound from speaker, but still can hear lorry/motorcylcle (dis u need sound insulation/absorption material and 'D' or 'P' type rubber seal). If install at floor, it reduced so much noise from the tyre....

Vibration Damper
STP BOMB AERO
STP GOLD AERO
STP ANTICOR G
STP ANTIRUST G
STP ANTICOR S
STP ANTIRUST S
STP ANTICOR LIGHT
STP ISILVER ANTIRUST
STP FLEX
STP VIZOMAT

STP SPL Sound Insulator, Heat Insulator
STP VBT Sound Absorber, Sound Insulator, Heat Insulator
STP BIPLAST Sound Absorber, Sound Insulator, Heat Insulator

paperclip
post Sep 6 2014, 02:07 PM

New Member
*
Newbie
0 posts

Joined: Aug 2009
QUOTE(patrick94 @ Sep 5 2014, 12:01 PM)
1 sheet enough for 1 door?
I ask my friend he work at car accessories store and he told me 1 door need 1 1/2 pieces ==...
If 1 sheet can cover 1 door I think I'll find people share biggrin.gif
*
Is he using StP? How many layer he put?
paperclip
post Sep 9 2014, 08:03 AM

New Member
*
Newbie
0 posts

Joined: Aug 2009
QUOTE(patrick94 @ Sep 6 2014, 10:39 PM)
Yes STP~ but not sure is gold or silver-i
1 layer only wor...
*
Gold/silver have same size....go to page 26, i already search 4 u.....look at pic i post, only use 1sheet per door, already got
100% coverage.....

4 Pages « < 2 3 4Top
 

Change to:
| Lo-Fi Version
0.0397sec    1.41    7 queries    GZIP Disabled
Time is now: 24th December 2025 - 08:59 AM