Got mine in the evening too.
Set it up with my Alloy Heatsink cooler case.
temperature hovers around 42-52
The double fans are super quiet!

This post has been edited by seehong: Aug 7 2019, 09:24 PM

The 4K video output of the RPi4B to my Sony 55" Oled TV isn't as smooth as I expected it to be.
Very satisfied with the Double fan heat sink cum casing though. Does its job pretty well but then again it is quite easy to brush your fingers against the fan while plugging and unplugging USB devices.

i m running the latest Raspbian and Librelec on it. The other distros are still not supported.

with fan off the temp rises by about 7-10 deg

https://www.youtube.com/watch?v=tWsM69_5g4E&t=43s

a good video on the stress test

This post has been edited by seehong: Aug 8 2019, 03:40 PM

Did a stress test earlier and my highest temperature over a 6 mins test was 60 deg.
Attached snapshot shows

Hi everyone! Been away at Redang Island and KT for a week. Brought the RPi4B and two MicroSD cards with me one with Kodi Leia and the other with Raspbian Buster. Hooked up the Kodi to the hotels' TV HDMI inputs with no problems and my wife watching her icdrama shows. Much smoother and faster compare to my earlier RPi2. No hickcups whatever so far. Used KODI and Raspbian to view my drone and action cam images and videos on the tvs.

This post has been edited by seehong: Aug 17 2019, 10:24 AM

I ve tried running Raspbian, Gentoo and Manjaro on the RPi4. So far Manjaro performs best overall in terms ease of use and configuration.

Need some help here with PiHole. Ran into some problems with it wondering you have the same or not.
I installed PiVPN on my RPi2B which worked like a charm. I then installed PiHole over the same installation. The online guide suggested I disable DHCP on my router and enable DHCP on the PiHole. It worked fine for a couple of days and then when I tried to tunnel the PiHole to the PiVPN, it corrupted my Huawei B618s-65D router. I had to hard reset my router to get it to work again. Temporarily, I am not running the PiHole yet to see if everything else work. I guess it could be the tunneling that caused the corruption.
Just wondering whether you run your PiHole with PiVPN or not?

I ve done direct ftp connected to my home WDCloud server. The speed is definitely faster than my old RPi2B. Didn't exactly check the transfer speed.

I ve let it run bittorrenting for 24/7 once only so far. Got a bit warmer but still ok cos I have the alloy heat sink case with 2 fans on.
Stuttering 4K youtube? sometimes only probably when the files are big. Can't compare to a dedicated pc though for the size, processor and price.
I like the portability of it bringing it to travel like I did recently to Redang.
OMV is not ready for RPi4 yet, so is Ubuntu Mate.

This post has been edited by seehong: Aug 24 2019, 08:55 AM

As of writing, no OMV updates yet for RPi4B. Running is Kodi is a little faster than my earlier card.
I still prefer Manjaro to Raspbian for its smoothness especially browsing.

How to Run Raspberry Pi 4 off an SSD or Flash Drive
https://www.tomshardware.com/news/boot-rasp...-usb,39782.html

Running game emulators on Raspberry Pi 4
https://www.tomshardware.com/news/raspberry...tors,40102.html

Mine up n running on RPi4

Just google and you can find lots of sources. Can't provide any links here.

You can try PiVPN which is very simple to install

I've been running PiVPN and PiHole on my RaspberryPi 2B for quite a while. Recently I realised I'm not able to access my PiVPN and internal network from outside using TunnelBlick or OpenVPN client. Anyone has any problem with this? I' using Digi Infinite 150 package at home. Would appreciate any pointers to overcome this problem.

which guide did you use for wireguard installation?
I tried without success

Yes already done with the firmware upgrading and usb booting is working.