Canon MP198 problem with E3
|
|
 Feb 21 2012, 08:47 AM, updated 14y ago
Show posts by this member only | Post
#1
|
 
Senior Member
807 posts Joined: Feb 2006 From: ~ /k/iap /k/iap island ~   
|
hi all,
i'm having this E3 error coming out from the printer since yesterday.. duno what to do already since i already reset the printer by using this method.. 1. Start with printer OFF 2. Hold down RESUME and then hold down POWER 3. Release RESUME 4. press RESUME twice, then release POWER 5. let green light blink until printhead has finished moving. by the way this printer is on CISS.. |
|
|
|
|
|
Feb 21 2012, 10:55 AM
Show posts by this member only | Post
#2
|
Junior Member
390 posts Joined: Nov 2008 From: 4get from where i came from  
|
do u pull the power cord after reset? pull power cord for 1-2 minute n see what happen after that
|
|
|
Feb 21 2012, 12:05 PM
Show posts by this member only | Post
#3
|
|
Senior Member
807 posts Joined: Feb 2006 From: ~ /k/iap /k/iap island ~
|
QUOTE(gunjack @ Feb 21 2012, 10:55 AM) do u pull the power cord after reset? pull power cord for 1-2 minute n see what happen after that Still the same.. E3 come out.. |
|
|
Feb 21 2012, 05:00 PM
Show posts by this member only | Post
#4
|
Senior Member
1,951 posts Joined: Mar 2011
|
E3 seems like physical jam to me. You may need to open the printer up (as in like when changing ink, do not dismantle the printer!) and remove whatever is causing the jam. Maybe paper jam? Or a paperclip fell in?
|
|
|
Feb 22 2012, 01:14 AM
Show posts by this member only | Post
#5
|
Senior Member
773 posts Joined: Oct 2009 From: nowhere
|
E3 = feeder/paper jam. (correct me if im wrong)
if its making feeding paper noise. try put a thick paper, manila card on it. if it goes in, it might clear the jam/paper path. |
| Change to: |  0.2278sec
 0.52
 5 queries
 GZIP Disabled
Time is now: 15th December 2025 - 10:38 AM |
Quote