Yeah.. But with a CPS engine u get more power lah..
Magnatec is around RM80 per 4L..

LCP cant rotate faster compared to the OEM pulley at the same engine speed..
Its like rotating a same wheel, one is heavier, one is lighter but the same size using the same energy. U use lesser energy to rotate the wheel.. So if u were to use the same concept in car engine, the car engine will always produce the same amount of energy at the particular RPM no matter the LCP is very light or very heavy.. So if the same amount of energy is used to spin the wheel, the wheel spins faster if its lighter.. Thats y the RPM climbs up faster than standard CP.

LCP doesnt bring ur powerband earlier or later or change it.. Thats the job of the ACP.. With LCP u dont really gain much hp.. The main point of LCP is to gain torque.. If u were to see a dyno graph the torque gain is consistent throughout the whole RPM band compared to HP where u will only see the gain at higher RPM.

yeah.. faster RPM = shorter time to reach the speed desired.

IAFM doesnt kick in leh.. The IAFM works at low engine speed only.. to help improve low end torque and give better FC..AFter u go higher rpm around 3.2k like that the IAFM will switch to short runner mode, thats y the boost around 3.5k rpm..

okroger..

Of cos night lah.. Where got ppl TT in the morning one..

Yeah very the true.. A lot of MNC comps i go for interview time my england most power compared to the whole batch.. The others all quarter baked london rolls all kena reject mostly due to language alone..

Can.. will post confirmation later.

That one was b4 my car accident at the side.. I place the number plate nicely in the middle.. So it doesnt block the hole down there which channels air to the radiator.. But after accident they go install the plate lower, now ended up the hole blocked a bit and the fan will kick in after some hard drive.. U no believe can ask hammie and xandras.. They are living proof of fnf after that my fan never turn on but their fan all spinning like mad.

Mb have to change TT area ady.. Later tonight will post up details after finalizing..

I like how the rear bumper design the to be high up and also the rear fender area which incorporates a huge area of the bumper as well.. So when ppl accident just need to change bumper.. not ketuk badan..

But ur bumper ady scratched up so fast even b4 ur 1k service wor..
Accidents dont often happen lah. .But sometimes if it happens u better pray u dont need to ketuk badan..

Haha.. insurance agent wont let u so easy to scrape one.

eh really ah.. hehe.. link pls.. im a bit busy cant search through all the post.

haha.. ketuk till become tuah lah.

Wow thats fast.. But what happened to ur car? got pics?

Super serow Slowpoke.

Yeah can leh.. My nieghbours ex FD2 also mod mod can reach 225kmh top speed.. But u must know Civic meter have a tendency of overreading the speed.

Nasib baik nothing happened to u..
Ohh.. yeah chassis gone ady. Hmm so what car u planning to upgrade next?

Ahh.. no worries.. I saw a PE got T-boned at a junction b4 by a very gold gen City who jump the traffic light.. The city quite badly damaged, but the PE both side door dented a bit terrible lah but no chassis bent like ur pic.. So rest assured u are safer in a PE.. hehehe..

To be honest not to butter my PE, but the Tuah is quite ugly at the back and front if its not in Black color.. the light are quite weirdly shaped and the front looks too bland in design..
At the survey i went last time, most PE owners were upgrade from LMST or old gen saga breed..

haha.. So urgent? Hmm no need to bulk lah.. Bulk also save RM5 only.. Bulk 5 sets only save Rm10 a set.. RM130 can get in automotive garage there.
Yeah from auto express test this x-treme vision is better in clarity and brightness density than osram nightbreaker plus.. But NB+ can get at RM80.. for philips best price is RM130..

LOL.. Go pole dancing.. hehe..

Cos of Junhowe loh.. First X-treme vision came out too expensive.. And no comparison reports also..
Now got test results and also since im working night at cyber and the roads the very dark need to change bulb.. And i like the white with a slight yellow tinge compared to NB+ yellowish with a slight white tinge.

LOL.. Moar pics for ur ride.. what have u done so far?
Next week me going for LCP antidote.

Poison!!!!!!!!!!!!1

i prefer yellow soft light.. with kenny g music.. hehehehe..

Naise! But i plan to go 4300K

NB+ Rm80, x-treme vision RM130

Hehehe.. u poison us loh.. so far we all do performance mods..

Ok lah where got bright.. 4000K is still yellow light.. Those blinding white light is HID.. not these Xenon lamps..
if pure white is around 4300K-4500K.. above that is white light but can see slight bluish tinge is 5000K and above.. U hvnt seen purple light yet wei.. 12000K..

Yeah.. Night breaker biasa.. NB+ is a bit whiter.

No lah.. those girls u set into the right mood.. all of them will love kenny G or some soothing nice music one..

xenon of cos legal lah..

haha.. I want to c0ck block bear bear mah.. haha.. Later go behind him i pasang 12000K HID with high beam.. He got 200% darkness tint also no use..

LOL.. Then wait till end of march to change.. :P

RM120? for the bluevision? then x-treme vision 200? hmmmm ...

Cos now the bulb quite new.. the market prices all still quite high.. Hvnt drop a bit yet.. Like NB+ now so long on the market. Rm80 only can get ori one..

i was in international conference call just now.. So fast u all posted 4 pages of poison and spam ady.. hahaa..

OEM cars do come with 12/13mm ARB ady.. so im not poisoned by that yet.. hehe.. The improvement from 12/13mm to 16/19mm ultra racing can wait while i do up other mods first..

U always can come down.. hehe..

Our car ori also got ARB ady.. If u bend down and see ur rear axle there can see a thin black bar.. I got post the pic b4.. but the pic is in my laptop at home lah..
remind me tmr morning and i will post it then..

He never decat yet.. Just an air filter and spark plug change is to improve FC and top end power.. A decat + LCP is going to unlease around 10whp at least from the low and high end..

hmm ok later afternoon I PM u the venue, date and time is 25th, 9pm. tentatively its at sri petaling..

Got leh daily drive also will have improvement of performance also.. If u no ARB u take corners will flip like Myvi.. haha..
Thats y PE handling very good.

Later hot days time ur bar melt..

So far meh.. Then i need to bring in 5000K HID ady.. But at the moment no money to mod this mth.. next mth only got moolah..

Come join us loh..

dafuq.. Its factory defect mah.. Sure can claim, thats what the 2years warranty is for.. U better go COSE there to claim.

No.. Ur ECU dont need adjustment.. Now is the ETC u need.. Set it to Eco mode to help dumb down ur need for power(since u cant remap ur brain).. Sure save fuel like no mans business..

Rm150 with installation is a good price ady.. Cheapest u can get is Rm140.. + Rm10 installation becomes RM150 ady.

I see what u did there.. heeehe..

Nope.. We dont have designer here..

Curse of the bear.. hahaha..

dont bother lah.. the things they put there all obviously he dont have experience in doing any modding.. he is just putting in a general opinion..

Hmm i like the alternative name..

Go COSE claim.. They normally wont really bother bout ur car mods for window problem.

U give me 4D.. i buy kena first prize ady then i belanja u..

haha.. u want try? Tmr sunday we shd know..

Technically yes.

Later slipped disc wor.. Then even more dangerous.. Faster get the 159..

Shd have paid me the RM10 installation and i install for u.. haha.. Its actually very simple thing to install only.

Yeah can.. U can go up to 1bar boost also.. But ur engine is not going to tahan long distance journey..
Furthermore for 5k budget u cant get a good turbo set up.. cos u dont have budget for piggyback.. Without ECU tuning the turbo is not going to work efficiently and might cause problem also..
a proper turbocharged setup with piggyback will run around 7k at least.. with standalone ecy its going to touch 9k..

Ideally for better gain changing the exhaust setup is required.. CFE is boosted at around 0.8-1bar.. 1bar=14.7psi.. but CFE engine internals are reinforced or forged..

Still got.. Tmr tt at sri petaling papa rich..


Mini TT - Sri Petaling Pappa Rich
Time:8.30pm
Date: 26th Feb
1) Zeng
2) xandras
3) K.lee
4) zapdos9
5) junhowe
6) bear
7) ziggy87
8) que0788

Drag has been cancelled due to safety reasons.. Tested out the drag strip today but it isnt really ideal due to traffic flow..
Drag will organise another time after everyone got their LCP ady.

---

Added on February 26, 2012, 1:06 amMine also 12secs.. Sien..
The road was not level, its going uphill a bit..

This post has been edited by ZenGTMM: Feb 26 2012, 01:09 AM

Ok sure.. start at 8.30.. then will lepak there damn long one..

LOL.. any other places u are interested to go? hehehe...
Hmm other than pappa rich got old town.. Old town better right? then change to old town lah..

---

Added on February 26, 2012, 1:10 amCastrol Bulk have to be put on hold.. Cant collect it yet.

This post has been edited by ZenGTMM: Feb 26 2012, 01:10 AM