But the engine already filled with diesel liao, will not hailat?

If can flushed, car can work... Means no hai no lat.
Just shorten maintenance period...should be fine.

Let the proton do first lo by all mean. Drive shaft broken.... Under warranty....
Wonder ash got Jalan. Haha. Good luck.

---

Added on February 8, 2012, 8:12 pmMiuk!!! Jxplod want ur phone number...
I pm u!!!!

its like he put his cool cool bird into the pus5y cat jo.. no more virgin..

---

Added on February 8, 2012, 8:16 pm

injector can be service.. but good to find a set at halfcut just in case..

Y don u service outside ler... Don let sc know u kena diesel mah

just follow the service center way

basically the cycle of fuel system

petrol tank > fuel filter > Fuel pump > injector > burning room > done

some cases dun even need to change filter,plug still running well

come my shop and buy petrol injector cleaner!

Anyone know why Honda Insight Maintenance is higher than other Honda Cars? I remember that during pre-purchase of honda insight, the SA told me the maintenance cost is going to be the same as honda City! And I remember reading in v1 that the cost is to be revise.. but all this never happen And funny thing is that, while goggling, i never came across any site complaining, is it only Honda Malaysia marking up the cost?

I really wish that Honda will lower the maintenance cost of Honda Insight ... 

---

Added on February 6, 2012, 10:44 amhttp://www.honda.com.sg/cars/service_pdf/InsightServicePackage_PriceList.pdf

For all Honda Insight owners... any comments on the servicing offered in Singapore?

Anyone know why Honda Insight Maintenance is higher than other Honda Cars? I remember that during pre-purchase of honda insight, the SA told me the maintenance cost is going to be the same as honda City! And I remember reading in v1 that the cost is to be revise.. but all this never happen And funny thing is that, while goggling, i never came across any site complaining, is it only Honda Malaysia marking up the cost?

I really wish that Honda will lower the maintenance cost of Honda Insight ... 

---

Added on February 6, 2012, 10:44 amhttp://www.honda.com.sg/cars/service_pdf/InsightServicePackage_PriceList.pdf

For all Honda Insight owners... any comments on the servicing offered in Singapore?

Inspira Accident













http://imageshack.us/gal.php?id=sZikzNjam52slNuR1ePNmw

This accident happened at Gambang. Please drive carefully

hotbits extractor is stainless steel

the diffrence is supercirciut is full stainless steel to the back

hotbits mid and end is steel

and also supercircuit copy magnaflow (usa) design

---

Added on February 9, 2012, 7:41 pm

EA does not know their work

I have fixed hotbits. No modification needed

I changed full set

---

Added on February 9, 2012, 7:48 pmSo sorry, not sure if just fix extractor only

I think hotbits is also cheaper compared to supercircuit

The reason I got the hotbits because of the low rumble and the black paint of the mid and rear

Stainless steel rear muffler can be seen from the back like stock but hotbits because its black, less visible

stewpik... last time your A pillar sound is that cold/night only got??? when afternoon don have??? i think my car have annoying sound came out already...

tomolo come TT ... got tome think ask you.... sit inside my car hear..... night time my car sure got sound one...

wei, u wan 19inches right?

---

Added on February 9, 2012, 8:13 pm

for me, car can tahan, saman cannot 

Stewpik si fatt hoi far jor... wan kena rape jorrr 

Stewpik si fatt hoi far jor... wan kena rape jorrr 

Hotbits also power increase

that call roll fender... for stuck in better rim and tyre and fender wont scratch the tyre..

rublik u not yet demo how to smack nurse back side

i had installed stainless steel Hotbits 4-1 extractor only, months ago at Speedworks PJ. That extractor was manufactured next door ( sort of) to Speedworks. Whether that uses the same thickness steel as in the Supercircuit designed extractor 4-1, i wont know. Still it is the same mandrel-bent kind.

It was plug n play , costing me RM580, installlation included. I did not want to de-cat, neither to change the muffler as yet until it is broken.

Round that time those mandrel-bending machines at the exhaust manufacturing workshop failed one after another. Now i suppose those machines are already back on.

Back to my extractor, if i were to de-cat later, i will have to buy a 'coupler/adapter' if i want to do like what Rublik did, insisting on the same Hotbits brand all the way . If i want to put a 'bullet' in the mid-section , no need for the coupler.

i also do not know how much power i gain by fixing the extractor. My aim was to simply have an extractor that can scavenge the exhaust gases faster out of the combustion chamber. Simply put, i am another cheapskate!

Wah sai... Removable........ If yes... All of u 240kmh jor lo.

Btw sticker GG d? Ask hydra skin print for us:p

---

Added on February 9, 2012, 11:56 pm
Nah... He will just show his wife the watch just like showing jack's car. Wife same response, he assume yes lo.