Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed
21 Pages < 1 2 3 4 > » Bottom

Outline · [ Standard ] · Linear+

 ★★★ LYN PROTON WAJA Club - V13 ★★★

views
     
TSmxsteven
post Jan 10 2012, 12:29 AM

Getting Started
**
Junior Member
58 posts

Joined: Oct 2007


QUOTE(Nightstalker1993 @ Jan 10 2012, 12:18 AM)
I'm asking because i read some people saying they get 2.7k rpm at 110kmh on their Wajas and in another thread it says 2.9k. But just checked, mine should be about right seeing that you're getting 5k RPM at 180km/h so that roughly works out to 3k RPM at 110km/h. no more worries now laugh.gif
*
7.5k RPM 260~270km/h...... Tested and confirmed....


Added on January 10, 2012, 12:29 am
QUOTE(Silon @ Jan 9 2012, 10:58 PM)
hi guys, i havent been back to LYF for ageeess!!!!! so i havent been following much that's been going on so dont mind me if i missed anything at all biggrin.gif

my 3.5 yold waja CPS (which has done 51,000km) steering is wobbling at >120kmh; started getting quite serious about 2 months back... wobbling even at 100kmh. no matter how i balanced the tyres, it was just impossible!!! on-wheel, off-wheel, the steering will vibrate at 120km and up. changed tyres, rotated wheels front to back back to front etc etc

long story short, when the car was jacked up and the front wheels free to spin, saw that the shorter of the two driveshafts was just wobbling like crazy!!!

and another thing was that the longer driveshaft didnt have the balancer!! (see in the pic) so went and bought two replacement shafts... now on certain patches of the highway the steering is ok, certain patches it still vibrates, but it doesnt wobble anymore. problem still isnt completely solved, but super glad i replaced the shitty stock shafts.

wonders if you guys have this same issue, of if your wajas have that balancing thingi. the guys at the proton workshop showed me all the cars there had them (saga, persona, gen2, 4g18 waja, etc etc).

cheers, people!

» Click to show Spoiler - click again to hide... «

*
yup for the long ones there is counter balance... for short ones dun have....

This post has been edited by mxsteven: Jan 10 2012, 12:29 AM
TSmxsteven
post Jan 10 2012, 09:37 AM

Getting Started
**
Junior Member
58 posts

Joined: Oct 2007


QUOTE(JesterBoy @ Jan 10 2012, 04:17 AM)
Hi bro, one of the waja owner here. Anyone can identify what's the problem with my car now? My car whenever trying to accelerate stronger than will have some feeling of jam abit. like the speed wont go up and shake shake. o.o . And any pro know of good place selling clock spring?

*add on , the temperature gauge raise when my car is not moving, when move, the gauge drop back down. sometimes it just raise and didnt come back down. problems?
*
Throttlebody dirty and maybe injector clogged... lack of maintenance and might be wrong oil or unsuitable oil used. The temp goes up means that you have a busted radiator, try to flush the radiator and see how. This case normally is the radiator clogged or the fan faulty.


Added on January 10, 2012, 9:45 am
QUOTE(ThunderGod_Cid @ Jan 10 2012, 12:54 AM)
surprisingly i understand your post
*
u n him r brader maaaaaahhh.....

This post has been edited by mxsteven: Jan 10 2012, 09:45 AM
TSmxsteven
post Jan 10 2012, 03:36 PM

Getting Started
**
Junior Member
58 posts

Joined: Oct 2007


QUOTE(JesterBoy @ Jan 10 2012, 03:17 PM)
hi bro, basically, im a car idiot. For the throttle i can check myself or need to bring to workshop? And the radiator thing, which is it and how to flush ah? Sorry for noob here.
*
1st i would recommend u to find sorty... opps i mean Elton laugh.gif laugh.gif laugh.gif look for his post "thundergod_cid" dun ask me why his nick name hahaha
TSmxsteven
post Jan 10 2012, 04:16 PM

Getting Started
**
Junior Member
58 posts

Joined: Oct 2007


QUOTE(dinwaja @ Jan 10 2012, 04:10 PM)
steven, i noticed something la on post #1...
this is V13 right? hehe...
*
lolsssss copy n paste consequences


Added on January 10, 2012, 4:21 pmfixed n done.....

This post has been edited by mxsteven: Jan 10 2012, 04:21 PM
TSmxsteven
post Jan 11 2012, 08:48 AM

Getting Started
**
Junior Member
58 posts

Joined: Oct 2007


130km/h at 3k RPM hahahahahaha

You cant change the gear ratio therefore it is FIXED.....

3k RPM at final drive is 108km/h
5k RPM at final drive is 180km/h


Vervain ur car slow? yeah i bet it is slow when stuck at traffic jam.... dun forget u have engine parasite....
TSmxsteven
post Jan 11 2012, 09:18 AM

Getting Started
**
Junior Member
58 posts

Joined: Oct 2007


QUOTE(culain99 @ Jan 11 2012, 08:52 AM)
my waja 4G18 Auto...
3K rpm - 110km/h
5.5K rpm - 180km/h
*
for auto 180 5.5k due to the torque limiter slip
TSmxsteven
post Jan 11 2012, 11:42 AM

Getting Started
**
Junior Member
58 posts

Joined: Oct 2007


QUOTE(dares @ Jan 11 2012, 10:43 AM)
Maybe his waja retrofitted with cvt blink.gif  *gasp*!
*
FYI CVT also had a fixed ratio...
TSmxsteven
post Jan 11 2012, 04:42 PM

Getting Started
**
Junior Member
58 posts

Joined: Oct 2007


QUOTE(hammercar @ Jan 11 2012, 12:58 PM)
no one?
*
It is very subjective question because not everyone mod on the intake is the same therefore all cam settings is different. Secondly i dont think anyone use custom cams or hi-cams in this forum or there is well i havent met any yet.

The settings is depends on your targets as you know cam profile is not ADDING power but shifting power bands where to increase efficiency on the current setup.
TSmxsteven
post Jan 11 2012, 05:27 PM

Getting Started
**
Junior Member
58 posts

Joined: Oct 2007


QUOTE(hammercar @ Jan 11 2012, 05:10 PM)
thanks steven, i am planning to use back the OEM cams but shift to power band to low rpm. heard many ppl advance the intake by using adjustable cam pulley.

i just need to make my car more driveable...it suck fuel like hell...city only can reach 8 or 9km/l only...haiz...
*
stock is still the best.... if u use adj cam pulley (acp) u will gain and lost coz the profile of the cam no change.... so cant compensate.
city driving FC is very subjective... if u stuck longer on a path u can even get 0km/l ...to fully understand the FC, we see the injector pulse time + fuel pressure... with this way we can understand how much fuel was injected.
TSmxsteven
post Jan 12 2012, 09:24 AM

Getting Started
**
Junior Member
58 posts

Joined: Oct 2007


QUOTE(Vervain @ Jan 12 2012, 08:51 AM)
Cooking oil. Don't believe, ask Mxsteven. hahahaha
*
Yup my iswara have been using CAP PETAI cooking oil on 4G91 engine lolsssss sooo faarr soooo goooood. Coz that time i give up on the car so hentam laaaa... eventually it turn out to be great..... if you want to overhaul your car.... try to use CAP PETAI oil.... not bad.... remember dun use corn oil.


Added on January 12, 2012, 9:25 am
QUOTE(zDarkForceSz @ Jan 12 2012, 09:15 AM)
steven your car done? going cny dy~
*
I had a feeling my car is not goin to make it..... anyway fuk it lols..... i can always ride my small bike go back home....


Added on January 12, 2012, 9:26 am
QUOTE(Vervain @ Jan 12 2012, 09:17 AM)
he's moving from 4 wheel to 2 wheel.
*
lolsssss its the return of my Supermoto episode.... back to bikers life once more... however i still keep my car.

This post has been edited by mxsteven: Jan 12 2012, 09:26 AM
TSmxsteven
post Jan 12 2012, 09:11 PM

Getting Started
**
Junior Member
58 posts

Joined: Oct 2007


QUOTE(dinwaja @ Jan 12 2012, 05:49 PM)
quote from my fren...but sorry it is in Malay...
prob start on 5th gear...manual....what's wrong with the GB?
*
Gearbox pinion gear seems to be wear out edi and some 1 way bearing damaged.... its better to replace the gearbox


Added on January 12, 2012, 9:12 pm
QUOTE(dares @ Jan 12 2012, 08:15 PM)
Just timed my 0-100, around 12-13 secs. I was using a GPS app to log the data, unfortunately the app polls at irregular intervals, either 1 or 2 seconds so I don't know how accurate it is.
*
record the video at your speedo meter is the best.... check the frame time sec.

This post has been edited by mxsteven: Jan 12 2012, 09:12 PM
TSmxsteven
post Jan 12 2012, 11:35 PM

Getting Started
**
Junior Member
58 posts

Joined: Oct 2007


QUOTE(jtkg_11 @ Jan 12 2012, 11:28 PM)
Hi all bro.. Anywhr can get waja autoflip side mirror...? thanks.
*
any halfcut shop will do.... just ask them flip flip for waja


Added on January 12, 2012, 11:36 pm
QUOTE(coinstar @ Jan 12 2012, 10:13 PM)
I just top overhaul my car. Friends say need to do pdt tuning after overhaul. Is it true?

After overhaul need to rev more during traffic jam or after slow down to turn into junction. Any idea to fix this? <------- FIX WAT? IT IS FIX U
*
yep maybe just reset the stepper motor only... nothing other thing u can reset edi lols...


This post has been edited by mxsteven: Jan 12 2012, 11:36 PM
TSmxsteven
post Jan 14 2012, 12:22 AM

Getting Started
**
Junior Member
58 posts

Joined: Oct 2007


QUOTE(coinstar @ Jan 13 2012, 08:57 PM)
Like that my car lost la... want to install voltage stabiliser but till today no opportunity yet... U just wait, after ibstal i post dyno, see whether my car power or not
*
save the money n just cont to drive the car
TSmxsteven
post Jan 14 2012, 10:45 AM

Getting Started
**
Junior Member
58 posts

Joined: Oct 2007


QUOTE(Nightstalker1993 @ Jan 14 2012, 02:49 AM)
beach please, i'm gonna use Mundorf caps tongue.gif laugh.gif


Added on January 14, 2012, 3:29 ambtw guys, if you send your tire for patching job or anything, make sure you check the tire pressure yourself after that. I sent mine for patching 2 weeks ago due to a puncture and today i went to petrol station to pump my tire. Apparently the mech thought it was OK to pump my tire up to 48PSI and i had been running it for 2 weeks doh.gif doh.gif doh.gif
*
What cap still almost the same.... u wan a good cap? use inverter DC caps for UPS. it is the best cap edi which design to eliminate ripples and store high quality DC. Others Caps for cars it is just a cover design..... know the products and understand how it works.
TSmxsteven
post Jan 14 2012, 10:17 PM

Getting Started
**
Junior Member
58 posts

Joined: Oct 2007


QUOTE(Nightstalker1993 @ Jan 14 2012, 07:34 PM)
was just joking bro. Why so serious? laugh.gif On a serious note, i thought the quality of the materials are different between brands? hmm.gif

Just now i worked in sepang at the parking lot got small Mitsubishi event test drive the Pajero Sport with Slaloms and all. After they finished tried the slaloms myself and my car understeer and body roll damn bad weyh. I think i went through the slalom max around 50km/h only till the car starts understeering too much rclxub.gif
*
where got serious lolssss.... if serious i edi F u hahahaha


Added on January 14, 2012, 10:19 pm
QUOTE(RegistraCHAN @ Jan 14 2012, 09:16 PM)
heheh i'm back here again,
Hie En Steven... Hie All
My Waja Got Prob, Suddenly Smell some petrol and
.. goin under found out this.. near the Petrol tank..
Those 2 Hose Got Leak at the Connection?..
How much to replace the hose?izzit the rite solution?
u need to replace the hose but i havent replace anything like this before lols.... i also dunno the price.

This post has been edited by mxsteven: Jan 14 2012, 10:19 PM
TSmxsteven
post Jan 14 2012, 10:39 PM

Getting Started
**
Junior Member
58 posts

Joined: Oct 2007


QUOTE(Vervain @ Jan 14 2012, 10:21 PM)
My car is no longer silent demmit. Got damn loud bass from the exhaust.
*
like the tik tok tik tok?
TSmxsteven
post Jan 14 2012, 11:05 PM

Getting Started
**
Junior Member
58 posts

Joined: Oct 2007


QUOTE(Vervain @ Jan 14 2012, 10:54 PM)
Like the bass box in wira sound
*
no worry... sound always can tune lols
TSmxsteven
post Jan 15 2012, 12:18 AM

Getting Started
**
Junior Member
58 posts

Joined: Oct 2007


QUOTE(Andy0625 @ Jan 14 2012, 11:18 PM)
Went BF today and met jackson and peter, young, friendly and sexy chap. now I know why steven like that place. brows.gif
*
coz it is opposite my house lols
TSmxsteven
post Jan 15 2012, 10:48 AM

Getting Started
**
Junior Member
58 posts

Joined: Oct 2007


QUOTE(Andy0625 @ Jan 15 2012, 12:46 AM)
you got nightstalker edi sure wont feel other sexy.  brows.gif bro, the alternator cable worth getting? no money but itchy.  sad.gif
ya kah?  brows.gif i thought ur house in puchong.  brows.gif
vervain: at heng exhaust kah?
*
u failed again .... i moved edi...
TSmxsteven
post Jan 15 2012, 11:06 AM

Getting Started
**
Junior Member
58 posts

Joined: Oct 2007


QUOTE(mao2 @ Jan 15 2012, 10:57 AM)
header? i though the header is sumwhere in those welding shop being borrowed? coz didn't find any header yesterday.. only your mock up header.. exhaust, snail, interfooler, all the related piping.. thats all i can find~ hmm.gif
*
the header is in the TIG box.... i kept it there... ask Jackson. coz so many ppl hold and wan to copy... hahaha can copy but copy too much later the header lost...

21 Pages < 1 2 3 4 > » Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
0.0582sec    0.72    7 queries    GZIP Disabled
Time is now: 18th December 2025 - 03:49 AM