set it to n only (if all ur devices r n ready) and enable AP isolation mode... sometimes it can help...
Unifi TP-Link TL-WR1043ND, with Custom Unifi firmware
|
|
 Feb 18 2012, 03:44 AM
Return to original view | Post
#1
|
 
Junior Member
162 posts Joined: Sep 2009 From: 127.0.0.1 
|
|
Quote|
|
|
|
|
Feb 25 2012, 02:14 AM
Return to original view | Post
#2
|
|
Junior Member
162 posts Joined: Sep 2009 From: 127.0.0.1
|
Anybody using OpenWRT can share how is the bandwith control on it?
I used to use DD WRT on 1043ND but choose to go back to factory fw since the QoS on the factory one is more suitable for managing bandwith/user as it use ip as the parameter to allocate the bandwith. How about OpenWRT? |
|
|
Feb 27 2012, 03:19 AM
Return to original view | Post
#3
|
|
Junior Member
162 posts Joined: Sep 2009 From: 127.0.0.1
|
QUOTE(blindbox @ Feb 26 2012, 10:00 AM) No cutting if there's no boot in the name. Also, once you got the firmware, change it to a shorter name like, say, code.bin and to flash back to factory, scp into the router, place code.bin into /tmp and do this uh well, there's a lot of device need to controlled in my office, hahaha, then i think i just gonna stay with the custom factory FW... CODE mtd -e firmware -r write /tmp/code.bin firmware Added on February 26, 2012, 11:13 am OpenWrt has no easy user interface for allocating bandwidth per IP (aka, you can say, quota management?) There's the alternative though, that is, gargoyle routers, which is based on OpenWRT, that is capable of limiting traffic based on the rules. Apart from that, if you really want to use OpenWrt and still manage bandwidth/user, you'd have to learn tc and linux scripting. Not to scare you, but be prepared to spend a week to learn it.   |
|
|
Apr 10 2012, 03:28 AM
Return to original view | Post
#4
|
|
Junior Member
162 posts Joined: Sep 2009 From: 127.0.0.1
|
QUOTE(rattan @ Apr 9 2012, 10:42 PM) Why whenever i direct my browser to 192.168.1.1 I always get this error : i think your browser cache messed up the router page with another router with same address that u previously connect into..[attachmentid=2781694]  happen to me sometimes when i use my notebook to set up several router in one day... Added on April 10, 2012, 3:30 am QUOTE(debbierowe @ Apr 9 2012, 07:46 PM)  how to do that?i think i screwed up when i changed the autogenerated one... i tot its the wifi's password  how do i set it back? This post has been edited by otosan: Apr 10 2012, 03:30 AM |
| Change to: |  0.0239sec
 0.41
 7 queries
 GZIP Disabled
Time is now: 5th December 2025 - 06:34 AM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.