For all those using the TL-WR1043ND, whether you're facing the problems or not,  perhaps it would be helpful if you could describe the following to help our fellow brothers here to identify their problems. Please provide as much detail as you can.

1. Current Streamyx/Unifi Package?

2. Exact firmware Ver No.? (Please provide direct link to the site if possible, it does not really helped if you just mentioned DD-WRT, OpenWRT etc. you need to provide the exact built number)

3. General usage of internet? (Just surfing? Torrent? Streaming? Gaming? All of the above? 24/7?)

4. Direct connection with cable to the router or Wireless?

5. If Wireless, what's the approximate distance between your PC and the Router? Which model of USB Adapter? PCI-Adapter? In-built adapter?

6. How many users using the router? (Again, please provide how many are those direct connect or wireless and how many of those are facing problems)

7. What kind of disconnection are you talking about? Internet disconnect? Disconnection between BTU and Router? Disconnection between PC and Router?

8. What are the problematic symptoms you're facing? Just disconnection? Slow browsing after a certain time? Bad signal? Etc?

9. This list is not exhaustive so feel free to add anything else you think may help.

tplink port 1 is for IPTV

port 2-4 is ur LAN

err... which is which??

if blindbox openwrt port 4 is iptv.. unless u manually change to port 1..

if tplink stock unifi firmware port 1 is iptv

better do it on LAN

use either port 2 or 3, dont use 1 and 4

u can't access to ur LAN now?

always stuck?? what browser u used?? how long it stuck??

so now u r running openwrt?? seem like either ur unit is faulty or ur installation is not complete.

I may not be an expert but I would login, perform a reset then connect via cable and start all over again with the document from klseet.com site. I had setup 2 units afew days ago.

Hope this help.

jackdon

u using klseet guide? or blindbox..

---

Added on May 15, 2012, 9:42 pmfollow this step to reset to factory default..

http://klseet.com/index.php?option=com_con...=146&Itemid=126

but ur case seem like incomplete installation..

follow the link i send

then i recommend u to use blindbox ver as he got a newer kernel

just download the upgrade ver.. then factory default..

it comes with qop installed.. so u dont need to download anything, and u can't

http://the.earth.li/~sgtatham/putty/latest/x86/putty.exe

Zzzzzzzz putty is a standard sw for ssh