in that case...u never will...heheheh
nobody can answer that question la bro...u need to test it...even with the same stepping/batch/lot...doesnt means can have the same result...and urs is diff production week...week 32...but i think that's a good week also...but still u need to test it...

This post has been edited by remysix: May 9 2006, 06:11 PM

wow...nice oc at default voltage bro...hope both core can stand the priming

that cab1e really rox...my cab2e can only do 2.8g at stock...can hit 3g but not stable lah...

mine is the same stepping wif urs ikan...2.9g stable for 12 hrs at 1.48v...3.0g need more juice...but failed prime...even only complete superpi 1M...tried 8M, no go...
maybe need to pump in more and more juice...
shud have taken the cab1e...dinster manage to touch 3.0 or izzit 3.1 at stock...damn...

hi bro...prob ocing the proc ka???
last time i have no problem hitting >300HTT stable with that proc...but ofcourse we have diff setting thou...
that no post screen, i normally have it when ocing my ram e.g. change the DRAM settings...when u got no post, any beeps coming out from the pc?
mine last time got some beeps which was referring to the mem, so need to bios reset...and what is the max HTT can ur chipset do with this proc...why dont u put ur ram on auto timing, set the divider to 133 or 100 and try again (probably u done that edi, but just in case...)
btw...ur ultra-d is due to reach u anytime now kan...or u already rcv it and not toying with it

This post has been edited by remysix: Jun 5 2006, 04:03 PM

hehehe...came across in the bulk thread or somewhere in lyn
that blend test ka...i've no prob on cpu stress test...no problem on memtest86+...ran the blend test...failed within minutes...dont know why la...

yes it does bro...
higher TMaxCase, u will have a better chance of oc higher. normally higher TMaxCase will have higher TDP. 55c is same as mine (mine is 144 cab2e 0610gpaw), moderate oc stuff i must say but still ok

that what i have been asking around months back.
if u could pass memtest86+ for 24hrs or more and then ran blend test but failed. what does it means? does it means u have waste ur 24hrs of time and electricity bill
what can be derive is that - using memtest86+: to know how high can u oc ur ram stable with purely (almost) memtest86+ own the process.
sp2004(blend test) - system (windows) stablity at the fsb u clocked ur ram where the process is not purely own by sp2004 since there are other background process running. so, if u want to run blend test u have 2 options:
1. run it with minimal process running in the background; or
2. run it at normal environment as u normally use ur pc for.

#1: is good for emmmm...not sure for what la actually;
#2: is good since if u passed the blend test, u can be comfortable to say that ur system (minus the gfx) is stable.

bro, it means that the proc has the PROBABILITY to oc higher...u know la Probability Theory, sama as what Forest Gump said, "Life is like a box of chocolate, you'll never know what you gonna get".
but u might have a pretty good chance la...other factors count as well

i tot wif this stepping u could do 3g at stock no prob...
but dun know la whether that 3g is stable or not...

urs is same as mine...
can hit 3g...prime no go...one time tried only, after that didnt try it again...that one wif 1.5x vcore...wif 0704bta bios...
flashed wif new 0406 bios but couldnt even load windows...
maybe i should flash back to 0704bta and give it another try for that 3g...

what's holding u back?

2gb kit uccc doing 300fsb
damn lucky if i can get it stable at 265...300 is like

tried mine last nite wif bios NF4LD329-3...proc at 3g, vcore at 1.4%1.10...mem down to 200fsb...superpi 32mb pass...OCCT Test run ok...Prime...failed after 2 hours...mmm...maybe the temp (proc and chipset) is not helping...my proc load is 52-54c, mostly 54c...chipset idle at 54c when running the prime...will changing my hsf, say to ninja or storm do any good?

now at RM2451...
do back to the topic...nanti kena sound!