TS doesnt count as first... so me first


FIRST!

wait... the first and second are both non satria owners and both HONDA drivers???


HAHAHAHAHAHAHAHHAHAHAHAHAHA


oh the irony....

This post has been edited by mADmAN: Nov 25 2011, 12:30 AM

WOI!!!!

that EG exhaust sound is SEXAY okaaaaaaaaaaaaaayyy.......

i iz liking wat i iz reading...

i assume its full track and not half track only?

normally people use 195. but this will also depend on the width of the rim... but typically if the width is 6.5-7 then 195 is the usual choice.. theres also alot of choices for that size.

my rim is 6.5 and i used to use 165 on my ex-kelisa

n yes, definitely worth it to go down... better fuel consumptioon n pickup....cheaper tires... though handling may not be as good as 16s.

try to find wheels with at least 7" width and use them with 195 or 205 tires. my next tires will most likely be be 205/50 KU36.

205/45/15 ada ka? never seen before being sold here...

as it is.... 205/50 oso quite limited choices

16s tend to be better as they tend to be wider and also a lower profile tire is used hence less sidewall flex during corners

6.5" boleh je masuk 205....i plan on putting 205 on my 6.5 wheels.



though i would love me a set of 15x8 wheels... but theyre so hard to come by

the lower the offset the more OUTWARDS the rim will be

the higher the offset the more INWARDS.


55 series slightly more comfy and better protects rim due to the slightly thicker sidewall... but more sidewall flex compared to 50

toyo is known to have soft sidewalls... the only toyo u should get would be the R888.

stick to the RE002 or the KU36 (which is cheaper than the RE002).

mfcm...best way to check offset is for u to open up ur wheel and look inside it

where did u find it?
coz even on kumhos website it states 205/50 is the only size for 15"

yup....seats are very important safety item....

at most... if u wanna go cheap (& brand new) i wouldnt recommend anything less than SSCUS.

besides...u can ori used full buckets for about 400 per piece these days... though condition is abit lacking...but rewrapping etc will cost about 200 and mebbe another 100 for the rails.. kow tim (prices is per seat)

---

Added on November 28, 2011, 1:57 pmowh yeah...instead of GTi seats... go look for EVO1 seats.. same seat but with better material

This post has been edited by mADmAN: Nov 28 2011, 01:57 PM

the factory is in pahang... SSCUS can find alot of places...

kakimotor is one of the sellers...

theres also an SSCUS shop in batu caves... kota kemuning...alot of places la


last i checked....EVO1 seats are going for about 1.4k front and rear...theyre not that expensive. n the front is original recaro somemore

FYI, SSCUS is going for about 1.2-1.6k per pair front only...but brand new la

This post has been edited by mADmAN: Nov 28 2011, 02:02 PM

cheras? not sure..but i wont be surprised if they have it there.

why the evo1 same price ah??? coz its old mah

its ORIGINAL recaro dood... thats considered CHEAP already.

SSCUS as far as i know doesnt have the memory function....ive never seen one on any of their models..

i could be wrong though

RM60 and u get 380km?????????????? i iz jelez

me about RM120 only get 400km.....but RON97 though

Trying to get my dyno tuning done hopefully next week. But i wanna go avantech to do a compression test before hitting the dyno to make sure all is good.

Dyno will be done in usj...can join to bz body...but dyno together not advisable as im doing tuning so might take up to 2 hours on the dyno

so....whos planning on buying THIS??

its not just about fitting the mivec head...ull also need the wiring and ecu