b4

screw most the screw in pcb, jus screw the 4 screw hole near by the chip when using the backplate.
and try install the extender 1st b4 the backplate..

not enough cleaeance for extender too

aiks. my koolance block got no problems. i can put bard in straight, compression will need extender...

This post has been edited by pennykia: Dec 15 2011, 02:00 PM

any gurus here can tell me how to make a setup so that i can drain the system easily? tried to drain my system just now which is a pain in the ass.

one good sample


This post has been edited by pennykia: Dec 15 2011, 03:30 PM

i saw you are using the same kind of radiator with me except longer and thicker. do u think a fan with low speed or high speed is needed for this type of rad? or rather higher cfm?

---

Added on December 15, 2011, 3:32 pmvery good tutorial, but the thing is im using a xspc pump and res combo which is located in the higher position, water don't flow down. btw what's your evga 570 part number? planning to buy the koolance vid580 block too, but some ppl have issues with the block didn't have contact with the gpu itself.

This post has been edited by louis91: Dec 15 2011, 03:32 PM

i forgotten to said thank you

---

Added on December 15, 2011, 3:37 pm

normal reference block will do bah...
might also like didnt not have contacted, so i put more paste. but i do have good temp. 37c idel , 50 max , core 930. 1.1v.

for ur case . connect one tube at the top of ur reservoil, seal it 1st, den flip ur case = =!

This post has been edited by pennykia: Dec 15 2011, 03:38 PM

im the one who asking about the backplate too. how much do u plan to sell? but my rad is on the top LOL. http://www.facebook.com/photo.php?fbid=219...&type=3&theater that's the photo of my current setup.

I heard the best is to use T fitting. Just make sure you plug another hole using cap.
http://www.chilledpc.co.uk/shop/index.php?cPath=64_82

No more PITA using this simple method.

flip ur case , remove the tube from ur reservoil (the one to you rad). seal ur thread. flip back = =..... might help gua = =..... or just remove ur cpu block, u wan to do it anyway also can lol....

eVGA backplate rm100 inclusive postage boss. anything plz pm. thank !

what kind of cap to use?
thanks for the smart tip, that works. didn't thought of it before. oh well, RM100 too expensive d very tight on budget now haha.

Available on same link as above. Btw your water cooling set is custom made or what?

i bought it in a kit. here's the link http://www.frozencpu.com/products/12222/ex..._HOT.html#blank they are decent, great for starters except the fans are loud and need stronger pumps for more complex loops.

the thread is too close with the backplate even w/o the backplate of wanna use comp need to put extender or it will stuck to the pcb

---

Added on December 15, 2011, 6:59 pmlouis buy mr pennykia QD la
easy to drain

This post has been edited by irienaoki: Dec 15 2011, 06:59 PM

it's sold too late sir !

pic after cut got or not?

whats a QD btw?

quick disconnect

lousy cutting