That looks normal

You don't add any water to the EK Coolant, it's a premixed solution. But supposedly adding distilled water shouldn't be a problem

Been browsing xtremesystem for a few days picking on the next casing for another serious project but can't find anything that is really worth the time any money.

It's not a replica, it's rebranding. Just like our INSPIRA

It's watercooling so hell yes you need water in the system.

Once the system is primed and if you keep the res cover closed tight, water doesn't evaporate too much. With a larger res, you can possibly top up water once a year but every few months would be a more reasonable estimate

Copper + Acetal = Cheap, no reaction with silver, no problemo....

I think we just claimed first watercooled Cosmos II in Malaysia

Cooler Master Cosmos II Super Tower - Watercooled






Some adjustment needed to install the RX360 on the top. There's less than 1 mm clearance for the ram.

Elinchrom 400BX strobes X 2 with 2 soft box. Need to add two more

Damage of the rig is unidentified :lol; I think 7-8k. Just the mobo + casing + gpu already 4k. Not including others

the lighting is alright, I'd call 4 strobes proper

The rig is running at 5ghz. Will prime till tomorrow. Can't boot into windows stable at 5.1ghz even at 1.53vcore.

5 x 120mm XSPC RX is quite overkill in cooling the CPU only. The Cpu idles at about 2-3C delta. Under max load with fans at low speed = 60C.

Waiting for FC block

Not stable at 1.5V, raised it to 1.515. All these latest Malaysia chips are kinda meh

you waiting for the best fan mar

Actually we already placed order to manufacture more but there's no news on the coil.

Sorry for your misfortune. Compression fittings all the way. All the money saved from using barbs would now cost significantly more (4 x 1tb = RM1500 almost)

This post has been edited by CyntrixTech: Feb 5 2012, 06:29 PM

That's true, it was sort of "lucky" that it leaked from the bay. Better get it fixed ASAP.

Your idle temperature is quite high. Are you in an AC room? What tubings are you using?

Yes we can get it but we are don't deal with inquiries in the weekends/holidays. Will get back to you on Wed

Yeah if you use 1/2" barb with smaller ID tubing similar to MDPC then it is harder for it to soften up and come off. BUT

1. Plugging the tubing is a pain
2. Getting the tubing in with the perfect tension/bend is a pain
3. Removing the tubing/fitting is impossible without cutting it off and splitting the tubing in half.

Compression is preferred

You can mount the cylinder horizontally at the back like some dimastech build.

Thats a hardcore controller.

There are smaller and cooler looking res out there. Most res 100+ only what, sell and replace it, or use double res.

Yup that's the dimastech. You can mount it side ways at the side too.