it's just out so i think no review yet.

anyone bought something from frozencpu before? your input is highly appreciated.

u can use discount code = xtreme
for 5% discount. but overall price is more expansive than performance-pcs even after discount....

i find frozen cpu is cheaper when compared to performance pc but it depends on what you are really buying.

so i need some help here, i pump/res combo just died on me. need some suggestion for pump and res to cool a single loop cooling cpu and gpu. any suggestion is appreciated.

im using XSPC RASA block, RS360 rad, koolance NX580 gpu block and 3/8" ID 5/8" OD tubing.

from your spec, a D5 will do

so D5 is using a 1/2" barb, what mod is needed to fit 3/8" ? im also considering EK's DCP 4.0, are those any good?

a ek top will do

is cheaper to buy from performance-pcs instead of buying from local wc distributor?

and should i change my pump?

im using xspc x20 750dc pump

and in near future will add mobo block + another gtx580+wb

will this pump support the loop..and im using 500r casing with rx240 for the cpu / and mobo block and ek 240 rad for the dual gc

im using the stock xspc kit pump rx240 which rated 750l/h

not enough pressure. i ran 2 rad with it, the pressure was in suffice to get rid of a lock water bubble
the loop had 1 cpu, 2 rads already in suffice. Also if you are adding another gtx580 need another rad

why would u use 2 rad for 1 cpu??

2 rad not enough? rx240 and xt 240..

my loop is

reservoir/pump>cpu>xt 240>gpu>rx240>res/pump

rx240 is okay for the the cpu
2 is better plus i wanted to get it ready for 7970 waterblock

if you are using one rasa pump then based on experience, if you would have not enough pressure or borderline pressure

i will put as many radiator as possible. Someone here put 3 x quad rad.

yes that is why i am looking for 3 more pieces of rx480
just got one yesterday. Once that is done should have a complete setup

500r can squeeze tightly dual loop..need i?

come mora here

i thought u advice me not to put many rad as it wont increase any performance..

no performance gain, but i like it. lolx

if u arrange rads between blocks then u can gain some performance. but if u line up all your rads together then only go to 1 block it is pointless coz if a single rad can already do the job then the other rads wont make your water temp go below ambient.

yea..that is why i setup a rad for every block..and after few test run..since im not in an ac room..closest i get is 3c above the ambient temp..which is good..besides it is running silence

anyway what do u think about the pump?..do i really need to change it..?

i was thinking about laing ddc pump with reservoir bay combo..but the pump only have 400 l/h where my current pump is 750l/h however..ppl still recommend me to change..mind share why?

whats wrong with your pump now? why do u wanna change to a slower pump?

rasa 750 pump has higher flow while ddc has higher pressure
different purpose

if i buy this koolance top does it work with this bay tank?
u should consider shipping, taxes and custom duty as well. i used the xspc x20 pump res as well and it died on me today