Welcome Guest ( Log In | Register )

127 Pages « < 36 37 38 39 40 > » Bottom

Outline · [ Standard ] · Linear+

 ------->> LYN Proton INSPIRA:Owners/Fan Thread V11

views
     
turbocharged
post Nov 17 2011, 04:53 PM

Getting Started
**
Junior Member
250 posts

Joined: Jan 2011
QUOTE(nzh0920 @ Nov 17 2011, 04:50 PM)


i know cut a hole in front of the snorkel will gain more "air", but finger pain already, next time cut again, the cover plastic very hard.
*
next you need to look for half cut evo x engine dy biggrin.gif
tyhuang
post Nov 17 2011, 04:55 PM

Getting Started
**
Junior Member
71 posts

Joined: Dec 2007
From: Kelang


QUOTE(nzh0920 @ Nov 17 2011, 04:52 PM)
anyone still wan ?
*
i want..let me know to deposit

Mini Bluetooth ELM327=(RM95) Bluetooth ELM327=(rm65)
1)AllenZz (3 units) Mini Bluetooth ELM327
2)JackNg1985 (Mini Bluetooth ELM327)
3)Pip_X (Bluetooth ELM327)
4)Exter075 (Mini Bluetooth ELM327)
5)tyhuang (Bluetooth ELM327)
satria89
post Nov 17 2011, 04:55 PM

Getting Started
**
Junior Member
188 posts

Joined: Oct 2008


QUOTE(nzh0920 @ Nov 17 2011, 04:50 PM)
today new toy.waited 3 weeks for this
[attachmentid=2540584]

parts number.
[attachmentid=2540586]

compare
[attachmentid=2540588]

tried to fit, but noticed not "plug and play"
need to fit like this, but i wan the cover, because without the cover engine room look messy.
[attachmentid=2540590]

so i cut until like this
[attachmentid=2540593]

finally fit perfectly.
[attachmentid=2540594]
[attachmentid=2540595]

and also noticed that our stock snorkel actually got many hole at bottom there to breath the hot air from engine room
but ralliart snorkel are in 1 piece shape.
[attachmentid=2540597]
[attachmentid=2540598]

compare again.
[attachmentid=2540599]

i know cut a hole in front of the snorkel will gain more "air", but finger pain already, next time cut again, the cover plastic very hard.
*
Wooo...looks nice and neat,how much you get for the ralliart snorkel? brows.gif
TSDM3
post Nov 17 2011, 04:57 PM

INSPIRATOR
*******
Senior Member
6,620 posts

Joined: Jun 2009
nzh,

nice, dun use snorkel lar, lagi best tongue.gif
turbocharged
post Nov 17 2011, 05:01 PM

Getting Started
**
Junior Member
250 posts

Joined: Jan 2011
guys, how much is the windscreen? ( original)

how much should insure? including tint.
tyhuang
post Nov 17 2011, 05:08 PM

Getting Started
**
Junior Member
71 posts

Joined: Dec 2007
From: Kelang


if 2.0, i think should cost 2k++ and normal windscreen is proton very cheap less than 500 oso can...to insure is 15% of the cost....tat's wat i;ve been told la

QUOTE(turbocharged @ Nov 17 2011, 05:01 PM)
guys, how much is the windscreen? ( original)

how much should insure? including tint.
*
turbocharged
post Nov 17 2011, 05:13 PM

Getting Started
**
Junior Member
250 posts

Joined: Jan 2011
2.0 windscreen with auto sensor is expensive right? 3k? no?
ckk125
post Nov 17 2011, 05:25 PM

On my way
****
Senior Member
649 posts

Joined: Jun 2008


QUOTE(turbocharged @ Nov 17 2011, 05:13 PM)
2.0 windscreen with auto sensor is expensive right? 3k? no?
*
2k
stewPik
post Nov 17 2011, 05:27 PM

New Member
*
Junior Member
28 posts

Joined: Aug 2005


QUOTE(nzh0920 @ Nov 17 2011, 04:52 PM)
anyone still wan ?
@stewpik, today forgot to copy the code into my phone, so didnt ask for the sunglasses holder, tomolo or next week i hlp u phone mitsu as my fren wan the snorkel also. sry ya.
*
nvm nvm, just dun forget next week, sunglasses holder & ralliart snorkel(how much u get ? ) and also the the clips for the snorkel part #MB938520 ( i think should be this found it in the net) thanks bro
nzh0920
post Nov 17 2011, 05:32 PM

Getting Started
**
Junior Member
83 posts

Joined: May 2011


QUOTE(satria89 @ Nov 17 2011, 04:55 PM)
Wooo...looks nice and neat,how much you get for the ralliart snorkel?  brows.gif
*
if not mistaken around 280.

QUOTE(turbocharged @ Nov 17 2011, 04:53 PM)
next you need to look for half cut evo x engine dy biggrin.gif
*
QUOTE(DM3 @ Nov 17 2011, 04:57 PM)
nzh,

nice, dun use snorkel lar, lagi best tongue.gif
*
hahaha crazy la u,
don really test the power yet after changed the snorkel because of raining now, but can noticed engine sound loud a bit, just a bit bit, not too soft not too loud quite nice.

today after let my dai gor kenny remap my car, notice really a lot different, earlier i not believe you all because u all comment like the different between sky and land.
but really after remap you can really notice the different,
don't talk about the power first, talk about the low range torque 1k to 3k rpm, its very useful, when i u turn i also no need press the accelerate pedal so hard already, cause the power already stand by anytime.
and last time traffic jam, cause i lazy to kick the clutch pedal, i use first gear to slowly drive the car, but it will suddenly jerk. jz now i tried to use first gear maintain 1x ~ 20 km/h drive inside parking base, no jerk already, and now you can slot in first gear fully realease clutch , then the car will move slowly and smoothly.
and some times drive over humps, use 2nd gear to drive, the car will feel extremely under power and the rpm difficult to raise, now this situation very minimal already.
red line at 7k? fun and addictive.

i gave my fren test jz now , he ask you fiesta can reflash mou? tongue.gif

This post has been edited by nzh0920: Nov 17 2011, 05:35 PM
turbocharged
post Nov 17 2011, 05:33 PM

Getting Started
**
Junior Member
250 posts

Joined: Jan 2011
QUOTE(stewPik @ Nov 17 2011, 05:27 PM)
nvm nvm, just dun forget next week, sunglasses holder & ralliart snorkel(how much u get ? ) and also the the clips for the snorkel part #MB938520 ( i think should be this found it in the net) thanks bro
*
sunglasses holder need to punch a hole at the ceiling?
nzh0920
post Nov 17 2011, 05:34 PM

Getting Started
**
Junior Member
83 posts

Joined: May 2011


QUOTE(stewPik @ Nov 17 2011, 05:27 PM)
nvm nvm, just dun forget next week, sunglasses holder & ralliart snorkel(how much u get ? ) and also the the clips for the snorkel part #MB938520 ( i think should be this found it in the net) thanks bro
*
why you need the clip? you can use the original one, your one lost already?
stewPik
post Nov 17 2011, 05:39 PM

New Member
*
Junior Member
28 posts

Joined: Aug 2005


QUOTE(nzh0920 @ Nov 17 2011, 05:34 PM)
why you need the clip? you can use the original one, your one lost already?
*
rm280 for snorkle, if the clip cheap cheap buy only lor, just check price ma...correct bo ? if expensive ma duwan lor


MeToo
post Nov 17 2011, 05:43 PM

Look at all my stars!!
*******
Senior Member
9,338 posts

Joined: May 2009
QUOTE(nzh0920 @ Nov 17 2011, 05:34 PM)
why you need the clip? you can use the original one, your one lost already?
*
Bro... u thougth of dig a hole on your car and fit in a carbon case for the CAI. Then maybe drop a HKS mushroom filter. I did that to my current car.... but not inspira lah tongue.gif
JackNg1985
post Nov 17 2011, 05:44 PM

New Member
*
Junior Member
25 posts

Joined: Dec 2010
Finally I saw a quality ralliart snokel...

Any ppl intrested of GB?

Kekeke....




QUOTE(nzh0920 @ Nov 17 2011, 04:50 PM)
today new toy.waited 3 weeks for this
[attachmentid=2540584]

parts number.
[attachmentid=2540586]

compare
[attachmentid=2540588]

tried to fit, but noticed not "plug and play"
need to fit like this, but i wan the cover, because without the cover engine room look messy.
[attachmentid=2540590]

so i cut until like this
[attachmentid=2540593]

finally fit perfectly.
[attachmentid=2540594]
[attachmentid=2540595]

and also noticed that our stock snorkel actually got many hole at bottom there to breath the hot air from engine room
but ralliart snorkel are in 1 piece shape.
[attachmentid=2540597]
[attachmentid=2540598]

compare again.
[attachmentid=2540599]

i know cut a hole in front of the snorkel will gain more "air", but finger pain already, next time cut again, the cover plastic very hard.
*
stewPik
post Nov 17 2011, 05:54 PM

New Member
*
Junior Member
28 posts

Joined: Aug 2005


QUOTE(JackNg1985 @ Nov 17 2011, 05:44 PM)
Finally I saw a quality ralliart snokel...

Any ppl intrested of GB?

Kekeke....
*
you want ? cuz seems already REMAP why not make use of it all ....hehehe more air = more power like u said.

NZH group buy can cheaper mouz ???? better say can if not i ask kenny speed cut at 50km/h for u...jeng jeng jeng cool2.gif
nzh0920
post Nov 17 2011, 06:30 PM

Getting Started
**
Junior Member
83 posts

Joined: May 2011


QUOTE(stewPik @ Nov 17 2011, 05:54 PM)
you want ? cuz seems already REMAP why not make use of it all ....hehehe more air = more power like u said.

NZH group buy can cheaper mouz ???? better say can if not i ask kenny speed cut at 50km/h for u...jeng jeng jeng  cool2.gif
*
haha, SC same as jusco ,tesco and carrefour, all price fix one..... biggrin.gif
lazyboy666
post Nov 17 2011, 06:34 PM

New Member
*
Junior Member
23 posts

Joined: Jan 2008
kenny in good biznes la...no time to layan or reply us d.. sad.gif
K3nnYkl82
post Nov 17 2011, 06:37 PM

NewBie
*******
Senior Member
2,479 posts

Joined: Jan 2003
From: Mars
You guys so miss me meh?? Sorry guys.. Was in a meeting whole afternoon.. Not even free yet. No lies.. Nzh and XC ans sothy knows I'm going for meeting just now
kennypotatoes
post Nov 17 2011, 07:11 PM

Getting Started
**
Junior Member
129 posts

Joined: Jun 2009


QUOTE(JackNg1985 @ Nov 17 2011, 06:44 PM)
Finally I saw a quality ralliart snokel...

Any ppl intrested of GB?

Kekeke....
*
This really poison.&....
I also thinking to change it

127 Pages « < 36 37 38 39 40 > » Top
 

Change to:
| Lo-Fi Version
0.0177sec    0.95    6 queries    GZIP Disabled
Time is now: 18th December 2025 - 12:37 PM