why u so rough. so far my revoltech no spoil. only stain and dust

i checked the internet and my friends and found 2 possible ways of dealing with stiff joints in figma and revoltech
option.1
use hot water(not boiling hot but hot enough that it wont burn ur hands)
all u need to do is just put the stiff part there for like 5~7 sec and pull it out
but b4 moving the joint u need to wait another 5 sec or else u might ruin the hole for the peg
drawback is the water+heat might ruin the paint of ur figurine

option.1
use hairdryer
just put the part in ur hand and use hairdryer to heat it up , and again to heat must not cause pain to ur hand or it might damage the part
drawback is it might not work

b4 i do anything to the stiff joint , i want ask is those method ok or no go?

The weird thing is it happen on my newly (at that time) acquired Anubis and Edward Elric. The broken one are actually for the display stand, and I notice the material is abit softer compared to the joint on the figure itself

oh the stand. ya the stand are crap quality.
even figma will crack

i only broken one of my figma display joint which is attached to the figma's back, glued it back, polish with sand paper and good to go again XD

Figma T-elos up for preorder. kinda similar to kos mos but the accessories are way lesser.

http://www.amiami.com/top/detail/detail?gc...E-5804&page=top

This post has been edited by shinkawa: Sep 19 2012, 12:14 PM

who's that pokemon?

weehee my penguin queen!! she's absolutely adorable


rest of pics + review is here: https://www.facebook.com/media/set/?set=a.1...=1&l=d03f33240b
total of 28 pics. i can't post all here.. haha

http://blog.livedoor.jp/hacchaka/archives/51843929.html

oh wai.. the leg different

Figma Miku Racing 2011 getting re-release
not sure if want.

I want! Where?

still selling at exp price, thank god me no miku fan >_<

mana mana? amiami i no jumpa one

http://www.goodsmile.info/product/ja/3679/...3%E3%82%BA.html

they just announce it yesterday morning if i'm not mistaken, shouldn't be so soon for preorder

^icic. tenkiu

why no figma version!!!


http://www.amiami.com/top/detail/detail?gc...N-5170&page=top

http://www.amiami.com/top/detail/detail?gc...N-5165&page=top

duhhhh, i been wanting to pose my figma slightly higher or above ground level and the only way is to put on those transparent blocks beneath it, now they come out with such great add-on but only for nendo? damn!!

This post has been edited by TheEvilMan: Sep 21 2012, 02:31 PM

any1 can identify this lelouch figma is bootleg or not thanks!!

This post has been edited by Red Cometz: Sep 21 2012, 04:02 PM

buy from where?

the color of the shirt fade or bad quality?
the hand with gun peg dirty or bad quality?

yea shirt colour fade already that y i tot is like bootleg gun a bit stain i bought from someone long time ago

This post has been edited by Red Cometz: Sep 21 2012, 05:25 PM