hi bro, interested in getting, any models that u can suggest that allows me to control the bandwidth of wireless devices? and im on streamyx 4mb package

hi received my RB951G today, thank you for sending it out almost instantly. but it didnt come with the receipt and also

but would like to ask if u could kindly guide me for these 2 things

1.i want all wireless devices to connect to this mikrotik modem n not my adsl router +modem.coz nw the all wireless devices are still connected to my adsl router +modem ( currently i managed to set up the ssid for mikrotik.. so 2 ssid , 1 from my adsl modem n 1 from the mikrotik can be seen)

2. how to set bandwidth limit for each wireless device connected

I am looking at Mikrotik RB951G-2HnD.. any offer ?

http://routerboard.com/RB951G-2HnD - says $80

Thanks,
DwiSha

Bro, can you pm me details on this.. Whats so special about it.. If flash ddwrt can? Is it worth to replce asus n66u? If using with huawei 4g usb modem can get full 42mb speed? How much rm?

Why you write so much PM. you rather write here so that other people can read and learn from it anyway.

I sent a payment, please check from my id dwijadas@......com

Thanks,
Sena.

Got the tracking number .. fantastic man .. I will need some guide on the router function ... maybe on RouterOS.

the study begins .. btw do you have any expert ? I need some customization to be done.. paid service

Noted boss !

Anybody who wants to configure mikrotik RB951G-2HnD with Huawei E3276 you can try this steps.

1. Plug on your huawei E3276 modem to your mikrotik. Your Mikrotik will detect it as E3276 correct.
NOTE: You should see ppp-out1 in the "Interfaces" link. If it doesn't, then add one.

2. Configure your mikrotik device most likely with the name (ppp-out1) with the following settings (example only):
APN: maxisbb
PIN: wap
Port: usb1
Type: pppclient
User: maxis
Password: wap

https://drive.google.com/file/d/0B5RZp8Mfy3...dit?usp=sharing

3. Configure masquerading for your. Goto "IP" --> "Firewall" --> "NAT" --> "Masquerade" --> "Add New" with these settings:
Chain: srcnat
Out Intf: ppp-out1
https://drive.google.com/file/d/0B5RZp8Mfy3...dit?usp=sharing

And finally enjoy 

To verify your internet access. When you plugged in your E3276, and do a firmware update. If it works, most likely your internet breaks at your natting .

wat is the diffferent btw MikroTik RB751U-2HnD / RB951G-2HnD, sry for nood question bcause i know nothing bout networking.

OK, THANKS FOR THE INFORMATION GIVEN. WAT IS THE BEST PRICE ? DOES IT SUPPORT THE MODEL SELLING HERE --->https://forum.lowyat.net/topic/2605886
THANKS FOR UR OPINION.

i mean best price for both. pm me. tq

bro,

if i replace my asus router n66u with this mikrotik, can i achieve higher speed on wireless?

also, can i get more coverage area?

pls advise.

tq.

Hi CloudComputer,

My Mikrotik router RB751G-2HnD purchased from you cannot be connected using WiFi but ok via cable. Can let me know the warranty process? Already PM you. Thanks

Hi CloudComputer,

Looks like the WiFi is working again after upgrading firmware using Netinstall. Let me monitor it for awhile. Thank you for the support!

Bro, do you have a shop to buy from ?

HI,

do you have RB250GS?

Hi, Bro,

Pm me RB751U-2HnD.

Do i entitled for promotional price?

Thanks

For those of you who wants to configure Android USB tethering with Mikrotik (I did mine on RB951-2HnD)

Step 1. Make sure your android phone is plugged into your Mikrotik.

Step 2. Power on your Mikrotik.

Step 3. Enable USB tethering on your Android phone when the check box is active.

Step 4. Noticed that in your "Interfaces" will show "lte1"

Step 5. Go to IP-> DHCP Client an obtain IP address for your "lte1" device.

Step 6. Go to IP-> Firewall and masquerade your "lte1" device.

NOTE: Don't specify your in-interface on your masquerading rules or you'll get burnt.
Cheers,
Aik

[attachmentid=3868631]

Hi CloudComputer

You're welcome. Just trying to help make everyone's life easier using it. I'm using Samsung Galaxy S4 to test. Samsung Galaxy S4 Active, S2 and S3 should work seamlessly too.

Only owners of Galaxy Nexus will have issue as per reported.
Cheers,
Aik