QUOTE(flashaholic @ Nov 22 2011, 07:52 PM)
@IEIE
Thank you so much for the review. I am very happy that you find this product helps in increasing your engine's pulling power. Once you get the heat shield for your intake done, you will feel the pull even more, especially in start-stop conditions under the hot mid-day and afternoon sun. I'm looking forward to hear of your experience once you have done this.
I am always happy to meet up to discuss, share my simple knowledge with others and learn about what others have done to their ride. Comparison between one product and another helps us to learn about other people's products.
When you butt-dyno your car on any product, you have to know and also be very observant about your original engine's performance before and after fitting the product.
I always say that there are 2 categories of drivers who will not be able to feel the difference of a simple working product; one is those who are expecting a huge increase in % of hp, torque, fuel savings etc and the other is one who does not monitor their car's performance hence they would not know the difference even after installing the product.
But if you were to plug in an aftermarket turbo or supercharger system, then you can be assured of performance gains in % as the gains can be seen in a dyno run. But is your engine able to have this fitted and is it worth the thousands of RM to fit it? Or are you looking for a better feel of acceleration and fuel savings without burning a hole in your wallet? Everyone has their own criteria for fitting an aftermarket product.
In over 15 years of looking for truly working devices to increase the torque and fuel savings for my cars (yes, I have 5 cars... a 1974 Land Rover 88 SWB Series III 2286cc, a 1985 Daihatsu Rocky 2000cc, an 2001 SLK (Small Little Kancil 660M - hahaha!), a 1999 Proton Iswara 1296cc and my latest New Old Car; a 1999 Honda CR-V 2000cc and my just sold off Proton Wira 1.5M Siemens VDO EMS400 model; which makes 6 cars after all. All are fuel guzzlers, so you see my need to have real working devices to increase the engine's torque and reduce the fuel consumption.
I use the products that I sell and I am very confident that they do function as advertised, otherwise I would not recommed the product to you and risk being called a conman.
So, once again, its been great meeting up with those of you who came for the product testing over the weekend and I am even more happy that the FireStorm Ignition Coil Booster met your needs and requirements for those who purchased the product.
I got home to Penang at 5pm today, just missing the after work traffic congestion on the Penang Bridge that had started to build up. Hehe.
Oh, by the way, my mileage averaged 10km/litre over my drive from Penang to KL on North South Highway with about 50km of running in town in Damansara Jaya, SS2, 1Utama and Ikea over 2 days. I am very pleased with this mileage as I only get about 8.8km/l in town use in Penang. I'd probably clock higher mileage if I had refilled when I cleared the Damansara Toll on Saturday afternoon.
Very very Wonderfull to see the product made by your own , just want to know that is it one piece Firestorm use for whole plugs coil system since it just plug into the Fuse box or one piece Firestorm use only for individual plug coil , Sorry for the silly question if i do offence u b'cos i know nothing about car !
Question :
1) Is it one piece Firestorm use for whole plugs coil system since it just plug into the Fuse box or one piece Firestorm use only for individual plug coil
2) May i know the Firestorm will caused any life-span shorten to the plug coil ( b'cos not cheap to replace the plug coil ! ) ?
3) How i know where is the Fuse Box location and which original fuse point need to plug out and insert the Firestorm connector pin ?
4) Any polarity for the product b'cos saw a Black(-) and RED(+) with it ? Silly Question b'cos car fuse does not came with polarity ? Am i right ?
5) Any Instruction manual with Clear Picture provided if i do purchase from U with install it by myself ( My drive is 2003 year made ACR30 2.4L estima ) ?
Please PM me the best prices cost of the product for my car model ! BTW ! i Staying in JB area !
Hope can get your answer asap to clear my silly doubt question.
Thanks you very much !