---

Added on November 8, 2011, 9:15 am

debrand/flash it , do it at your own risk, i done it to one of my Mf190 and still using it. it wont install any dashboard when u plug it into a pc/lappie, hav to install it manually from my thumbdrive which i DL the dashboard......

and this Mf190 works fine with my MR3420, which Chuah was having some problems when using the Mf190+Mr3420

i think the Local Area Connection would be faster right ? at least faster than the dailer or the dail up setup,   

well u can try to speedtest or download, then see is there any different on the speed ...

wen i use Sonyericsson phone, if i select usb option via phone then i will direct have a Local area connection pop up and auto connect, this LAC provide a 10Mbps driver for the link,. but when i connect via dial up setup, the Link speed is vary from time to time,.. and dial up setup dialer i can feel a little slow in speed compare to the LAC

i am satisfy now with my E1762, Direct plug in can really get real RAW power of maxis, and now my RSSI: -65dBm.. and speed start running wild in QVOD PLAYER...

thanks to cruxidex,..!!!1

u done amazing job and it solve my E1762 inside my house problems, as now my E1762 can work as strong as my phone in signal !!

lolx..
Currently, I using K4505 RM150 only but maybe you are right ...    .... Anyway, I will test my speed at midnight and see how 

southern got no problem

mine is ok for now,. just finger cross and hope tonight dont happen again,.

Er the Maxis CS in Twitter suddenly DM-ed me telling they are having network outage.

well my situation best is direct plug,. and once my E1762 stuck at 3G signal again, simply just reflash it with mobile parnet FW & dash board from dc-files.com.

and also use window 7 mobile broadband dialer to dial my E1762 under the Local ARea Connection will get me better speed and lower PING compare with using router or using dial up setup in window 7,..


using method above can get this speed,.. 

download E1762 driver from HERE

first, remove your maxis/mobile partner dashboard/dialer u install,

replug in your E1762, and wait for cwin 7 to recognise your E1762 first ,

then launch the driver Setup in E1762 driver u download,.. ( unzip the rar file of E1762 driver u download,. and go to huawei driver then driver setup,. , double click and launch the installer,.. )

this will make your pc recognize your E1762 without instal those maxis or mobile partner dashboard, and direct using the window mobile broadband dialer and st APN and just connect straight,.. )
aboev method get me the highest speed ever and most consistent and also window will use NDIS ethernet emulation to dial your E1762 under Local Area Connection,..

when i use my E1762 with my router, speed very very poor, UL speed decrease ,.. only get 1.2Mbps max and DL speed only 4~4.8Mbps,..Ping is between 70~95ms,..
but when i use method above, i get 6~6.8Mbps DL and UL get 2~3.6Mbps,.. PING is good around 45~65ms,.

now the new MDMA cannot connect the usual way

go to "open network and sharing center" >"change adaptor settings"> look for "Wireless Broadband Connection" ~ "LAN or High Speed Internet" > right click to connect,

once you are connected, you can see the new MDMA button also show "connected" take note of your Tower Code and note them down which is UMTS900 or UMTS2100