i am super jelly until fainted here, LOL

---

Added on November 22, 2011, 1:57 amspeedtest ( E270 + TL-MR3420 + time DNS )











as i was thinking why not i reflash my Huawei E270 too. and then after flash it again wow it works again as normal,. but as u can see that E270 is good and consistent in DL speed only,. when come to upload speed is poor compare with E1762,.. i guess there is different between 900Mhz & 2100Mhz 3G band,.. as E270 only support 2Mbps upload and if DL speed is more important for you, E270 is good device for it,..

This post has been edited by chuahcs79: Nov 22 2011, 01:57 AM

after reflash my Huawei E270 from DC-FILE, my E270 is obviously improve and working inside my house as getting the 2100Mhz 3G band as well, looks like my area have 900Mhz & 2100Mhz too,.. signal & consistency is much more better than E1762 even though only support 2100Mhz single band,..

[attachmentid=2547553]

and for E1762, you guys can try between the RAS (modem ) & NDIS both mode,.. plug your E1762 direct to your computer and select from the dashboard ,..

and you might surprise that either one of those work better than the other one,..

i just tested it myself,.. after select RAS in E1762 my upload speed improve a lot so does the PING lower a lot too,.. but for consistency in DL speed, i still love Huawei E270,..

the most amazing Speedtest :

HSPA+ available ???? ( using device Huawei E270 + TL-MR3420 + Time DNS )

[attachmentid=2547558]

[attachmentid=2547559]

[attachmentid=2547560]

[attachmentid=2547561]

[attachmentid=2547562]


[attachmentid=2547563]

i think somehow maxis does have HSPA+ in my area just that maxis control my speed last second in speedtest to prevent it go above HSPA

This post has been edited by chuahcs79: Nov 22 2011, 06:01 AM

WOW!! This totally break my connection up time record!
For first time it's connected for so long




This post has been edited by KKW: Nov 22 2011, 07:44 AM

generic / zeros DNS



Time DNS





@Chuah, E270, wat modem is tat? HSPA+?

wow so consistent,. good news for sure,..

---

Added on November 22, 2011, 8:00 amHuawei E270 is HSPA modem only, support 7.2Mbps DL , 2Mbps UL and 2100Mhz single 3G band support only too.

but still i have to say consistency in DL speed & super strong signal is the best so far in all modem i ever try,.!! great buy if ur area have 2100Mhz band running,. usual spot i put E1762 i get 51~67% signal only but when i put E270, i get 77~ 87% signal,. weird huh ? even though they both using same internet antenna chipset,..

---

Added on November 22, 2011, 8:06 amspeedtest ( Huawei E270 + TL-MR3420 + time DNS )










E270 is good in DL speed, but UL is low and cause the ping higher compare with E1762..
router dial E270 faster than E1762 for sure too,..

This post has been edited by chuahcs79: Nov 22 2011, 08:06 AM

fr wat i understands, 2100MHz provide HIGHER SPEED but 900MHz gives better RECEPTION but not necessary higher speed

higher bandwidth, gives higher speed and wider coverage but lower bandwidth (900MHz) u get better reception even in a "blind spot" area , i strongly believe 2100MHz suits u better

pls correct me if i am wrong

---

Added on November 22, 2011, 8:19 amTime DNS, e1762 direct ,no router,raw



This post has been edited by digilife: Nov 22 2011, 08:19 AM

yea 2100Mhz definitely provide higher speed as u mobile is using it currently to provide 42Mbps in most of penang area,..

yea 2100Mhz penetration is much more weaker than 900Mhz,.

just am glas that my Huawei E270 is back alive and running again,..

OK la tu.

This post has been edited by fruitie: Nov 22 2011, 09:11 AM

LOL,. yours is amazing whole time,. so envy and jelly until fainted,. LOL

dun use router and use raw

mine one seems ok tu,.. ha ha



E270 direct plug, ( raw power ).. LOL

---

Added on November 22, 2011, 9:18 amif she use raw, the speed will be

This post has been edited by chuahcs79: Nov 22 2011, 09:18 AM

Well, no need la. To me, this kind of speed is more than enough.
I want consistency, *high DL/UL/good PING.

*
High DL = >5Mbps
High UL = >1.5Mbps
Good PING = <55ms

wow,.. your request is much higher than mine,..

my area hardly can achieve 1.5Mbps UL,.. as long as the UL is between 0.7~1.2Mbps then i am happy,.

and area DL is not problemo,. can get 8~9.5Mbps ma,..

only the UL and it can help to get lower PING,..

who cares the good speed, ppl just wan u to test it raw, like dat also cannot?

we wan data and test result

LOL,..

---

Added on November 22, 2011, 9:28 amE270 + router



seems like raw power is better,..

This post has been edited by chuahcs79: Nov 22 2011, 09:28 AM

offices here opened for business, hence the sucky speed again

how come everytime when u in office, ur speed so ?

u use same device like u use at home ? have u ever try nokia at office places ? might get better though with direct plug ( raw power )

now still at home la......., abt to prepare for work

x3-02

---

Added on November 22, 2011, 9:49 amsame location but different "modem"

its the Chuah's Fav X3-02



This post has been edited by digilife: Nov 22 2011, 09:49 AM

see , good recommendation right ? really does the tricks no matter what time, it will get you the maximum speed available at that time..

very good speed indeed,..