Tank ALMOST at E, so far i've run 320 km on 70rm worth of ron95.. is that okay? Petrol smell gradually going away..

Can any gearbox pros here recommend me a good auto 4speed gearbox for my wira 1.6? Because my current 1 is dying, leaking GB oil all over my garage, refuses to down shift when slowed down or it takes too long to down shift, and sometimes goes into free gear while in D when i throttle hard. Get Mitsubitshi GB from halfcut shop or original 2nd hand? Also i was told by a friend that my thomas cup edition wira is using 1.8 gearbox, is that true?

today morning woke up, cant press the clutch. why ah?
What should I do now, cant even drive to mechanic shop.
Is just because of the clutch oil dirty? or other issue? so far driving got no sound on gearbox, no issue on changing gear and idling.
Some more just came back from penang last weekend.

1st day morning, the clutch like very hard to press, then i press+depress a few time, its ok and can go on road
2nd day morning, same things happen and still can go on office and come back to home
3rd day morning which is today, cant move at all d

clutch oil still full

How come some Wira uses hydraulic clutch, some using cable clutch?? 

guys.... Is evo 3 radiator hose suitable for 4g15?

Hose only... Killer glass la... 

LOL...

Guys, will our engine auto shut down when there isn't enough engine oil?...

Recently my car will shut down (i mean straight off itself without jerking) when i wanna accelerate the car after the traffic light turn green or want to turn at a junction. It is very dangerous as i might get a kiss at the back anytime. There is once the engine shut down when i halfway through a corner (i step on the clutch and some braking) and almost go in the drain as the power steering is super heavy.

okay. here's some detailing :
GSR turbine
GSR manifold
GSR intercooler + piping
GSR injectors
GSR Downpipe
GSR TD04 turbo with wastegate
HKS SSQV blow off valve
stainless steel pipings and silicon joints
Jasma 2.5 inlet straight flow muffler
exhaust piping 2.5, mid box and bullet
blitz bov
those items should be around rm3.5k to rm4k. don't forget bout the metal gasket, turbo meters, and other small stuffs. normally for BOT should be around rm6k+ if u add a lil bit into NA mods its about 7k+ don't forget to alter the chassis with such power.

okay. here's some detailing :
GSR turbine
GSR manifold
GSR intercooler + piping
GSR injectors
GSR Downpipe
GSR TD04 turbo with wastegate
HKS SSQV blow off valve
stainless steel pipings and silicon joints
Jasma 2.5 inlet straight flow muffler
exhaust piping 2.5, mid box and bullet
blitz bov
those items should be around rm3.5k to rm4k. don't forget bout the metal gasket, turbo meters, and other small stuffs. normally for BOT should be around rm6k+ if u add a lil bit into NA mods its about 7k+ don't forget to alter the chassis with such power.

Need help with my wira 1.5 manual.

Previously clutch was hard to press, and at the end, cant engage gear at all. After bleeding, car ok for a week and then clutch happen again in one fine morning.

Tried bleeding again, not useful anymore.

Further explanation about the condition:
i) Start car, can put in gear include reverse (no matter pressing clutch or not), but the car just wont move
ii) Just DIY and replaced the lower hydraulic pump. But still doesn't help at all.

Now i wonder:
Is it about the master hydraulic pump at top, or I need to tow my car to mechanic shop to move gear box and check on clutch disc?
Any recommendation of mechanics around PJ area? I hate mechanics that tend to ask me change everything but in fact only 1 small bearing issue (past experience)

Guys，Urgent help

my wira are leaking PETROL!!
Please help

The image attached red color is the one leaking



hw much should i repair??

i should go for proton center or any place intro?

any recommended workshop to do flush/bleed brake system for wira ?

or any tyre shop can do that ?
thanks

anione change clutch before...?
i just taken my car...
and i feel like no clutch no feel when i step down the clutch pedal...
izit normal for one that just after changing clutch...?

wa... isit the wira clutch season? 

today... my clutch failed on me too... drove on highway.. wanted to overtake, but can't engage gear.. 
need to go mechanic already tomorrow...

my car is wira 1.5 carb .. thinking of upgrading my clutch to 1.6. any recommendation?
see in the forum, most ppl will use exedy clutch + cover, and change flywheel is it? change flywheel, isit necessary?

what's the price diff with oem normal change and this?
i'm staying at bukit jalil area, any place i should go for this ar?

thanks sifus..

For your mechanic in USJ1, price and works OK?
Can give me the contact?

Guys, sometime my wira will pull itself to the left or right when driving on uneven road...i've to fight the pulling force to keep the car going straight...

Any idea on what is the cause of this?...would like to get an idea before i send to the workshop...

I'm currently on 15" rim with 195/50/R15...whats the diff between Original vs SuperPro?...how much u bought for the SuperPro?...our car need only 2 right?...

Sometime when i turn left at low speed, there is some kind of "tok tok tok" sound heard on the right side...wonder what could that be...any idea?...
My concern is only my wira will auto-pull...if i drive my kancil on that same road, my kancil didn't auto-pull...

Thanks for the advice bro...will get those part check...would like to try out those SuperPro bush...
Any recommended seller in LYN?

local Jasma also claim from japan lols....

the best part is the guy came to me tell me his Ultra Racing bar ori from Japan HAHAHAHAHAHAHAHAHAHAHAHAHA

Guys need to confirm this, is mivec bonnet (not the asti one) plug and play to our car? Meaning just remove the 4 screw from the bonnet and bracket, not the front hook one and screw back with mivec bonnet? Or there is other stuff to do? Im going to get a mivec bonnet for my car. Thanks! Much appreciate if you guys help!

not exactly plug and play. the front grill have to be removed coz bonnet is longer to below. and the bonnet locker also have to be mods to below coz the place to hook also moved already.

@k3v_84
no need to change fender, Wira fender can match the bonnet.

Ya fender can use back for
Confirm, and grill surely remove. But the unsure things is the hook, i plan to diy it, but nt knowing the way. Anyone know whats the way? Btw thanks Other for commenting/reply. Haha! Really slurp the bonnet.

which manual gearbox can i use for 4g92p? prefer short ratio for acceleration.

hi guys, may i noe how to replace wira aircond set on the passenger side? hot to remove it?

any sifu can help here...

How come want to sell off your MIVEC GB?

not BOT?

JPJ bole pass ka?