1. YOU didnt get the ori part from the proper seller.... mine have the Mitsu logo and is from OEM factory...

2. Your installer dont have the experience in installing it... you must NOT remove all screw from the bonnet to install the holder, as the bonnet will SLIDE down (due to weight) and screw up the aligment... mine is perfectly aligned...

3. Coz yours is NOT OEM, it dont hold well for YOU.... mine is perfect, the guys have seen it up and not moving at all, and even XCInspire and myself have spent much time under the bonnet doing mods... it didnt move at all...

4. I had tested mine when installing.... one damper CAN hold up the bonnet, only lifting it is heavier (but without the dampers, the bonnet is way too heavy).... again, coz you didnt buy ORI or from OEM...

So, this dont mean OEM parts (strut bars, dampers, etc) dont work as well, it simply mean you bought from the WRONG source... and lets not get to those parts you are selling....   

---

Added on October 27, 2011, 12:06 am
Ori from Japan, with a Mitsu Japan part number sticker on the part and Mitsubishi Genuine Parts plastic bag wrap...

Current is OEM, donno from where and no stickers or Mitsu plastic bag...

Sorry to kacau Sleed's sales thingy, but he need to wake up and know what is OEM and what is ORI...

Look at it this way. The expensive tint saved your car from being ransacked or driven away... If there was a passenger there, it would have saved him/her from shattering glass. Any cheaper tint may not have given you this peace of mind.

---

Added on October 27, 2011, 9:41 am

Why are people stopped and who are those unmarked cars? Traffic police?

---

Added on October 27, 2011, 9:46 am

For your case seems like someone tried to insert something. 

FYI, CCS5 has inside and outside walls... make sure it does not show "Inside" wording outside is when doing tire balancing, etc.

hi guys - i'm getting my 1.8 manual (red) next week. can't wait.

anything that can be mod easily (budget as well) & things that need to take care/check for the 1st few months?

Puchong. They say proton dint suply mmc filter to them anymore.

weird..unless the parts number is the same, i think the MMC filter uses different part number..

the MMC oil filter part number is MD360935

i always service mine in Eon, they are still using the MMC filter.

I sell it.
RM15 - 1
Rm10 - if u buy 25

no need to pening2.. if they insist to use AMP oil filter from proton... then u said go F*** urself.. this is my car, u dont provide the OEM oil filter for our engine demmit.. 

---

Added on October 28, 2011, 10:16 am

which SC? need to avoid this one?
Btw, feel any difference between torco SR1 and eneos 5w40?

that is the problem.. keh3..
btw, if we MUT, OBD2 our ECU.. can we detect whether our got anti theft sensor.. just wondering..

---

Added on October 28, 2011, 10:40 am

if oil filter gasket, oil filter have their own gasket attached
the gasket and skru u can used the normal one lor... same like our previous car.
and i dont know what do u mean cleaner?

---

Added on October 28, 2011, 10:42 am

agreed

+1 .. damn agree

my putra also stays with cat for long long time .. until that time exhaust stuck jo .. only i change the whole thing... the exhaust fumes damn 7 smelly... 

the puchong sc, next to the puegeot sc.

difference using torco? well, currently is very good la, since just change oil, we will know more after few k...but anyway, from puchong sc to lcct, i reached in ~ 30 min and the engine was purring nicely....

the number i gave to u la...near to my hse only

hehehe.. i take the used oil filter from proton... no different at ALL..
btw, this is bussiness strategy.. profit must more than 50%..

what is the item left hand side?

Arrrr....!!!???  Ori sure expensive lor... u no problem coz u rich ma....    

>.<

Proton charge me for the Proton Oil Filter around RM38 T_T

Is it worth to buy space saver spare tyre (doughnut).. How much is it roughly? Where to buy? Any tyre shop?

oh suspension cover..
my oil filter

Original AMP (Proton )

RM10 (market Rm12-13)

Mitsu


RM15 (market Rm20+)

not same, the one they changed for me is Proton Genuine Parts, blue color one...

anyways, we can source for ori mitsu oil filter, BUT, when we go service our car in Proton SC, we still have to use their oil filter la....they dont allow us to bring our own oil filter......so, no point la...

honda city and vios also dont have.

btw, there are 2 types, one with carbon and 1 without.

part number..

normal cabin filter: 7803A004
carbon cabin filter: 7803A005

---

Added on October 29, 2011, 1:49 pm

so it is true that now no more mitsu filters being used?

Sleed, which SC? Mine say cannot use own oil filter if not void warranty. But oil I bring my own fully syn.

PE SC in Puchong.

sleed... car key is from mitsu.. just the cover from proton

next to tan chong there. i just showed them only… they changed for me…. bull crap void warranty. my previous service also mitsubishi filter as seen at those picture.

one thing bad they dont do alignment




anti rollbar (front and back) ori from mitsubishi.

final part… my camber… OMG….

---

Added on October 29, 2011, 2:13 pm

correct… just the cover..

out of toptec 4100 4200 4300 4400 4500
i found out 4200 most expensive
and the most certified oil compare to other toptec
included VW 507 00 which they state
change intervals of up to 30,000/50,000 km (or every 2 years for low mileage drivers)

in malaysia i don't know la, but in other country they used this oil in Golf GTi and other VW & AUDI
their vehicle 15000km only service once, but i look at their oil filter, almost double of our car's size. thus,
no matter how great your engine oil are, without a good filter , same cannot tahan also.

so high??
i'm not really too remember on the 2.0CVT but tested 1.8CVT today, 100km/h around 2000-2100rpm at 6th gear