yea it is as equal to tl-mr3420 V1.2 support LTE,.. even huawei E392

so now u have a lot of choices

those hole u drill is DIY ? looks amazing though,.

infact how is your speed with that combo now ?

This post has been edited by chuahcs79: Sep 5 2012, 04:50 PM

just though why not open the whole top cover easier ? instead of drilling / melting hole ?

oh yea hor, forget u place it vertically,..

Haiz guess other than super fan, drilling hole is only way,..

well as for today my places super heavy rain whole day.. guess dont need much modification in this weather other than super fan alone

this kind of case damn lame, happen suddenly,..

as long as it able to hold the temperature cool and performances can be max out...

i dont mind how it looks like too,.

think blacktubi inspire me in this.. going to test DIY on my mr3420

---

Added on September 7, 2012, 2:07 amLatest Setup for my router + ZTE MF680



This post has been edited by chuahcs79: Sep 7 2012, 02:07 AM

well in my situation my ZTE MF680 is performs better in signal and speed than my Huawei E372 in the same best spot at my places

should be very firm, mine it is not shaking at all though

mine is tighten from day 1 i buy,. i never really touch that part since that router hard move from the best spot start from day 2,..

there is simple step as below

- Go to -> here to download the MDMA 1.0.0.31 Beta 10

- plug in your Huawei E367 modem into your computer usb port

- close any Dashboard / Modem software if it pop up

- To use MDMA connect your Huawei modem, U need to create a RAS( 2 TV + 1 telephone icon / dial up ) connection so your MDMA will connect when u click connect

- go to open network and sharing centre

- set new connection or network

- connect to internet

- choose dial up

- set the *99# dial number

- connection name -> MDMA

- click connect

- click skip

- run MDMA that u download

- select 3G only, set your telco APN ( access point name ) like : Maxisbb, celcom3g, my3g, etc etc in the blank

- click connect inside MDMA

- after the MDMA dial up connection connected,, hit the Band config button

- select manual instead of automatic band

- tick Uncheck all

- then tick UMTS2100MHz only ( really make sure u tick this only correctly !!! )

- click apply and ok


above method should set your E367 always concentrate to UMTS2100MHz 3H/HSDPA/HSPA/HSPA+ only,
hope it help

This post has been edited by chuahcs79: Sep 8 2012, 06:40 PM

from your note, i think the device didnt performs any better since u planning to let go ?

This post has been edited by chuahcs79: Sep 8 2012, 07:23 PM

that method is making your E367 modem concentrate on UMTS 2100MHz 3G network only, after u setup, no matetr u direct plug into usb or use with router, your modem will concentrate in UMTS210MHz signal only

what kind of specs is Huawei E387 ?

if is LTE then the V1 dont support, if is DC-HSPA+/HSPA+/HSPA/HSDPA then V1 router do support

if i am not wrong this router dont support mifi though as E587 is a mifi

well no harm to try,. but i never try before as i dont have any mifi though,.

i hope it works for you

well u could try first,

mifi modem is a mini wifi router itself, why u need it to work with this big router ?

E587 is DC-HSPA+ mifi also,..

easy for user who is always on mobile,

if u not always on the move, u can get E372 or ZTE MF680 for this big 3G router

E587 have value, u can always opt for resell it in garages sales under networking section

This post has been edited by chuahcs79: Sep 11 2012, 09:19 PM

i believe whatever stuff you buying it is also depends on luck too,

my TL_MR3420 was working fine as from day 1, and there is this inccident my TL-MR3420 drop to floor from very high woofer shelf on wall, only my E372 is kaput and my TL-MR3420 was fine still after that,..

well yea big wireless 3G router have better wifi coverages than mifi for sure